Classic Accessories StormPro Dark Grey Heavy-Duty T-Top Boat Cover, Fits boats 22 Foot - 24 Foot L x 116 Inch W, Marine Grade Fabric, Water-Resistant, Trailerable

Fit my 2017 Epic almost perfect. I did have to remove the trolling motor as to not cause any added stress. I also did pay attention and tried to not pull too tight as I can see what others were saying about the stress on the seams. I didn’t even attempt to use the support rod as it was very cheap. The company definitely needs to reverse the direction of the zipper. Makes no sense zipping it up and then have to somehow climb in a covered boat to try and unzip! Has only been on for a couple of days, so time will tell.

Very good quality. Bought one for half the price with "the same specs" from ebay. It felt like it was made of paper compared to this one. And the box it came in was 1/3 the size of this box and the size was way smaller than advertised. This one is true to size, sturdy and easy to set up.

This cover will not fit every boat perfectly as it’s not a custom cover. For the cost, it is well worth the money, fits reasonably well, and has protected my boat. As my cover has aged it is showing some signs of wear and tear. One of the straps has torn off and some of the seams are separating. Seeing the company advertise a warranty and excellent customer service, I decided to put it to the test. I visited the company website, completed the warranty form, and submitted a few photos as requested but not required. Within 48 hours, I received a human response and a replacement cover is in route with no additional changes! WOW! This is an outstanding company selling a good product at a great price.

I loved my 1st one I had bought and they covered it under warranty. I decided to replace this one with a brand new one and it has a tear at the seems brand new out of the box. See photos I put a photo of a properly stitched area and 2 photos of the bad seemed area, I am sure it is just a factory defect and I know that happens, if this is replaced I will update my review. I am optimistic this will get taken care of as my customer service was great with my 1st purchase. I have waited a week, no one has contacted me, looks like I am outside of return window so they don’t care, went to their website and there is no way to contact them, will try to open a dispute with amazon now. This is very disappointing. Cheap cover.

This is a 3 year review. I purchased this in 2022 for my 23ft center console. I keep my boat stored outside always under this boat cover and it has worked perfectly for me. VERY easy to cover with 1 person. I am located in sunny Florida and it has withheld sun damage for 3 year. For the price point, you cant ask for anything more.

heavy duty canvas, double sewn seams and heavy duty zippers and just the beginning. Even better is the fit and the included support pole with rounded top for the bow section of the canvas cover keeping water and snow from accumulating on the bow section of canvas without puncturing the canvas. Fit the 21ft center console Regulator with T- Top and 300hp Yamaha outboard like is was custom made providing full coverage! I was extremely surprised with the form, fit and function. It cleans-up with mild soap, water and soft brush without sacrifice of it's water resistance. Boat is stored on trailer outside at a marina in all weather conditions. The Included tie downs affixed to the cover, keep the cover attached on very windy days without any issues. Great value for the price and a lot less expensive than dry storage. Shipped and received on time, well packaged and easy to install.

I've only had this about 3-weeks, but here are my first impressions overall. I'll update this review as needed to reflect on the experiences I have.*** Sept. 21, 2020 ***The material on this product seems durable. It is fairly heavy and has repelled water well. It looks nice and is fairly easy to use.However, there are some downsides. After one light-to-medium rainstorm, I realized there were some issues with water pooling on the tarp fore and aft. A buyer of this cover should be ready to do some engineering or be ready to purchase additional products. Some of this will be done to your specific boat.First, the pole this comes with is junk. I didn't even use it before I realized it was not going to hold up the cover. I replaced it with a piece of 1.5" PVC pipe right away. Unfortunately, after the first rain, the pole fell down 2 different times and I had to figure out a better way to keep the pole up (i.e. more PVC and fittings.) I did use the top and bottom bases that came with the original pole and those worked fine, they just slipped on the deck.Second, noticed quickly that the stern (at least for my boat) was pooling water, so I had to engineer a solution to create a "tent ridge" so the water wouldn't pool in the stern. Used another 1.5" PVC pipe and some fittings to create a ridge pole that slides into my rod holders and runs to the bilge access area to keep the cover elevated and give the water a place to run off.Lastly, because of the poles fell and pooled water in the rain, the seams were stressed in a few areas. They didn't rip all the way, but you can see where the material is pulling apart. I can see through the cover in 3 different spots. Mainly at the "corners" of where the T-Top meets with the main cover. I am going to have to find a way to reinforce those areas. If I had to do it again, I would preventativlely reinforce the seams around the T-Top with some canvas material and glue or some of the "tarp tape" you can find on Amazon to prevent this.Overall, I think this is OK for the money, but you should be ready to put an extra $50-75 into the tarp to ensure it lasts longer. Even still that is a lot less than many other T-Top covers out there.

I was skeptical buying the cover as I’ve had bad luck with boat covers on Amazon but this one was a pleasant surprise..Fits my 2024 Bulls Bay 230cc very well..The front could use slight modifications and the front straps did not reach the trailer but other then that it’s a great , heavy material, cover