Folding Flip Replacement Key Fob Cover Case fit for 2010 2012 2011 2014 Chevy Cruze Malibu Camaro Equinox Equinox Sonic Terrain Keyless Entry Key Fob Shell

This a good value, and works fine, but you will either need to have the new key blade cut at a dealer, or you'll need to replace the blade with your old one. The parts that make up the pivot that the blade swings on are slightly different. I saw a review on here that recommended using a pick to drive out the roll pin to swap the key blade. DO NOT USE A PICK. A pick is tapered like a wedge and when you try to drive the pin out it will very likely break the cast metal pivot. I ordered 2 of these fobs and destroyed the first one this way. I found that an 18 gauge brad (nail) was the perfect size. A brad is also tapered on the end, so I clipped the tip off with a pair of wire cutters and filed it flat on the end. A light tap from a small hammer easily popped the roll pin out of both the original key and the replacement. Lay the pivot/blade assembly on a block of wood with a hole drilled in it so the roll pin is over the hole. Drive the pin out with the modified brad held with a pair of needle nose plyers and it will drop right in the hole instead of flying off somewhere. Off to order a replacement fob for the one that was destroyed by trying the pick method

Excelente le Quedó Muy Bien

It’s an okay cover if you need something asap but not for long term. Parts don’t fit with old cover parts so everything needed to be replaced and was unnecessarily hard to assemble. I watched YouTube videos of other people replacing their covers and they replaced parts with ease but this cover made it extremely difficult. And to top it off my key does not even flip open, I have to force it out myself every time. Double checked to make sure everything fit correctly and it did, don’t know why key doesn’t flip open. Recommend finding one on eBay or directly from chevy.

good

Seemed nice at first but with the key riding around in my pocket after about a month the rubber buttons started to stretch and after about 2 months the key fully snapped off. I have to start my car by inserting that key piece into it then jamming this fob onto it becaus it's a chip key. You get exactly what you pay for.

I replaced my 13 sonic key fob, I used my my own circuit board and used my key. I did have to take the pin out of the roller to use my key. Works perfect. There are YouTube videos that show you how to do it. The hardest part was to separate my old fob

My original key had completely fallen apart- the button covers had all fallen off, and the key itself finally broke out of the elbow that holds it.This replacement fob/key worked out exactly as I had hoped. The original key bar for right into the new elbow, after figuring out a way to hammer out the roll pin. It is made so close in design to the original that it all fit together beautifully. The only trouble I really had was breaking open the original key's shell. Once I swapped over the board, it all went together as it should. The spring open feature still works as well.It took about 30 minutes to do, all told, and it saved me about $200. I would absolutely buy one again.

I used this cover to replace one of my Chevy keys... it works just like new with this cover and it saved me reprogramming my key. However when I went to replace another key; it wouldn't separate even with me cutting it for hours.... so I guess it won't work on every key because some must be glued internally.