Dynofit 6x5.5 Wheel Spacers 1.5", Heavy Duty 6x139.7 Forged Hub-Centric Spacers Compatible with 2019-2025 Ram 1500 and 2021-2025 Jeep Grand Wagoneer, 77.8mm Bore with M14x1.5 Studs – 4Piece Set

Worked great

Perfect fit for my 2025 Ram 1500. Easy install, it comes with thread lock.

These are some solid, well made items. Only took about an hour and a half to install properly. Seriously, if you don't know how to use a torque wrench and grinder, you have no business installing these. The instructions are not all that great. I purchased these to use on my 2020 Ram 1500 Big Horn to get more clearance from the control arms so I could use tire chains on the front end. Here is what I used - 1/2" Torque Wrench capable of at least 140 ft.-lbs. 1/2" Breaker Bar Angle Grinder 7/8" and 19mm sockets Loctite thread locker - BLUE 242 (for the love of God, DO NOT use RED. Your mechanic will be pissed) 3 ton rolling floor jack I put the truck in 4wd Low. This held the front wheels in place to install the spacer. Jack up a corner of the vehicle until the tire is about 2 inches above the ground. Remove the wheel Test fit the spacer to see how much of the wheel stud needs to be ground down (for me it was about 1/4") Grind down the wheel studs until they no longer protrude beyond the spacer. VERY IMPORTANT! Apply a thin line of BLUE loctite along the top of the wheel stud. ALSO VERY IMPORTANT! Install the spacer with the provided lug nuts using the 19mm socket. Torque the lug nuts to manufacturer specification. (I personally torqued everything to 130 ft.-lbs.) Install the wheel on the spacer with the original lug nuts. Torque the lug nuts to manufacturer specification. Rinse and repeat for the other three wheels. I let my vehicle sit overnight to be sure the BLUE thread locker has set up. Take a little drive in the morning for 8 to 10 miles. Re-torque the wheel lug nuts. Take another cruise for 60-100 miles. Re-torque the wheel lug nuts. Keep in mind that the wheel studs on the spacer are brand new. They will stretch! The instructions stated to check torque on the spacer again at 1,200 miles. I'll do that as well. Hope this helps somebody!

Everything was in the box great instructions easy to follow good quality. Perfect fit no issues.

After adding the 1” fender flares and removing aftermarket - offset wheels/tires, the stocks sat too far in. These adapters at 1.5” gave it the perfect stance with the factory wheels and the 1” fender flare/lip.

Quality part,ease of install ,gave my truck a slightly wider stance with a 1.5 spacer flush with outter fenders .

I bought these for my Ram 1500 4x4, needed a little wider stance and these work flawlessly. They give the truck a nice look and allows for bigger tires without having them rub.

Excelente

Great so far no complaints makes my car look better

Parfait

Good product

Quality……. IHighly Recommend this for your dodge Ram

Très bonne qualité