VLuxe Extended Collection: DIY Eyelash Extension Demi Extended and Bond & Seal Set - Featherlight Synthetic Reusable Artificial Eyelashes Multipack Lash Clusters

Okay I’ve had and used this product for a few months so I feel like I can give a solid review. So here goes…I bought the 3d lash set. Out of all the sets they offer, these combine length and volume. Similar to volume individual lashes.Length: These lashes are LONG which I love. The box doesn’t come with actual length but I took the liberty of measuring them for you:Small- around 14-15mm longMedium- 16-17mmLong- these are 18mmIn the picture I posted, I have on only the longs aka 18mm and they look fabulous in my opinion.Adhesion: Now I used 2 glues + the overnighter when I apply these lashes. I use the bond section of the glue here, but I also add iEnvy 3d mega hold lash glue that I paint on the inner side of the band then attach the cluster under my natural lash. Then add the overnighter on the outside of the clusters once attached. So the method is : the bond glue from here at the base of my natural lashes, then 3d mega lash glue on the inside of the cluster and the overnighter on the outside of the cluster.With this combination the lashes last 10 days with me working out, washing my face, washing the lashes with lash shampoo daily (I wear a lot of eyeshadow) and they don’t budge.Durability: I’ve used each cluster at least 4 times and washed them and 90% of them are holding strong.How to clean: I get a small bowl and pour dishwashing liquid (dawn) and warm water and let them soak for 10 mins. Then I use a lash comb to remove the larger bits of glue then a sharp pointed tweezer to remove the smaller bits. This I found is the most effective method. They look brand new afterwards.Hope this all helps. Good luck. Great productEDIT: One last trick: Obviously don’t sleep on your face in these. But if you do and you wake up with them bent and looking crazy, don’t fret! Boil some water and put in a small container. Then get a makeup brush or something that the handle is of a medium size (the lash brush that comes with my lash shampoo has the perfect size for this). Dip the handle of your medium sized brush in the hot water for like 10 seconds, remove from the water, drip off the excess, then place the hot brush at the base of the messed up lashes from the inside. Hold it at the base for like 10-15 seconds then proceed to rub it down the entire length of the lash slowly. Overall you should have the warm handle applying pressure on that section of bent lash for 20-30 seconds each time. Do this as many times as you need until the lashes are no longer stuck to your eyelid and are in the correct orientation. You can also do this with a mascara wand (a clean one) but it won’t be as effective. Using both the mascara wand and the handle of a medium sized brush together (alternating between which one goes in the hot water and apply pressure to the lashes) I’ve found has the best effect.I will try to get some pics of this process and add it here if it happens to me again

رائعة

Absolutely love this brand! Easy to put on and last 24hrs or longer depending how much glue you use . The glue is also a great product highly recommend.

ممتاز

Note: I bought the bond/seal glue to use with Falscara cluster lashes, so this review is for the bond/seal only. I purchased this with my own money so this review is my honest opinion. I really wanted to like this product but it just had too many cons. My regular lash glue brand is Kiss I-gloo which works amazing and lasts a long time except it sticks to lash extensions & is difficult to remove, causing me to replace them too quickly. So I bought this product with the intention of replacing the Igloo but due to the downsides I won't be repurchasing.Pros:- really easy to use- portable, same size as regular mascara tube- helps lashes last longer/be more reusable than other glues, i.e. there wasn't any glue stuck to the lashes when I took them off- comfortable, not irritating, no smell- the glue consists of a thin liquid and dries pretty quicklyCons:- the bond stays slightly sticky and collects hair/lint really easily. The sealer actually didn't help with this, and I feel like it didn't help the glue last longer. I ended up not using the sealer side.- the bond side doesn't last that long. Brushing my lashes with a spoolie made them come out because it separated the lashes from my natural ones. The bond brush could be a little fluffier - it's just a hard brush and I feel like the spikes weren't long enough to separate my natural lashes evenly enough to get the full effect of the glue.- the Bond is really hard to remove! I really wanted to like this product but the glue stays stuck on my natural lashes so bad. They felt hard and clumped together like bad waterproof mascara. I had to spend about 15 minutes per eye peeling/picking/brushing out the glue, removing some of my natural lashes in the process. Ulta eye makeup remover on a cotton pad didn't really work :(- this means I have to redo ALL the lashes on my eye if one comes off because the glue is already stuck and it's hard to reapply over the top of existing glue. Meaning quick touchups aren't really possible so this is a hard pass from me.- you can't get your lashes wet while the bond or sealer is drying, otherwise the sealer turns white & hard (kind of like instant nail glue does when water gets on it)I would buy this product again if the following improvements were made:- Use longer/fluffier bristles on the glue brush to allow for better lash separation and glue application.- Ensure the glue dries to a non-sticky finish- Ensure the glue is easily removable using regular eye makeup remover.