GQFGenesis Hova-Bator

Today, 2-25-2015, is Hatch today using my new GQF Genesis Hova Bator incubator with a Little Giant Egg Turner. I have used still air incubators in the past with MARGINAL success. So far, of the 20 eggs placed in the bator, 14 have hatched and appear to be healthy and viable chicks. I cannot say enough about this incubator. It's fantastically easy to use and reliable. It maintained the temp at 100,1 degrees on the high end and 99.8 on the low end. The humidity was so easy to maintain between the two numbers recommended and when we went to lockdown it was also easy to kick up the humidity level to the recommended setting. This is ONE GREAT SOLID WELL PERFORMING PRODUCT.In an age of poor customer service and equally poor product standards this company and incubator is head and shoulders above the rest. I called and spoke to a very nice lady when my equipment was in route and they were just awesome.To those who question the Styrofoam shell you need only check to see what's the best insulator on the market today that is reliable and lightweight and you will and Styrofoam is the ticket.I HIGHLY and STRONGLY recommend this product for any novice or semi skilled person interested in hatching eggs.While I don't expect to have warranty issues if my past interchange between this company to date is any indication of future performance I have NO CONCERNS.Awesome!!!!!!!!!!!!!!!!!!!!!!!THANKS AND CAN"T WAIT FOR THE NEXT SUCCESSFUL HATCH.UPDATE.....We had a hatch of 20 outa 20 eggs with this incubator. No it didn't lay the eggs or fertilize them but it did a great job hatching them BUY THIS INCUBATOR!!!!!!!!!!!!!!!!

This is probably the best Mid level Incubator you can purchase. It is very easy to use and set up. Is also easy to store. You will need to manually control humidity in this unit unlike some more expensive incubators. I would highly suggest investing in an automatic egg turner. Other than that we have had very good luck with this model. Parts are also available if needed.

This little incubator works great! We've hatched everything from Silkies to Polish to Banty to Quail in this little incubator, and it hasn't had a hiccup yet. Like others have posted, give it a day or so to warm up and stabilize before putting eggs in it. Also, ours is located in our laundry room, which stays between 78 and 83 degrees F, I have no idea how well it would do in environments with wider temperature variations, though I suspect it wouldn't do well if temperatures vary greatly between hot and cold, or if the environment is either extremely hot or cold.That said, the LCD display and easy control panel are awesome and seem to be really accurate as well.But, I like having it in the house, because I walk past it constantly going to and from the garage, so I usually catch and get to watch the little chicks as they hatch. Yes, much more exciting that watching paint dry, really.Edit:I wanted to edit my original post because basically one hatch afterwards, I got the dreaded 104.5 degree thermometer reading, fortunately the incubator was empty at the time as I was bringing it up for a new hatch, and decided to do a little investigating... well, no matter what you do at this point, unplug, etc there's no bringing it back, PLUS it's NOT the heater that's heating up the inside of the incubator, at least on mine, it was the frickin' thermostat/controller unit was hot to the touch, no joke! The heating element/fan was cool! Meanwhile, the internal temp of the incubator was hot enough that it pegged the reptile thermometer I put in it at 120F... not ideal for eggs. This is with NO power outages, or anything like that. I live in the desert, one of the most boring places in the country for power outages. We don't get them, or spikes, or anything else. This unit simply up and failed randomly during its initial warm-up, and apparently failed in a catastrophic manor for the controller itself to be warming up the inside of the incubator...Now, I called GQF, they're a company in Georgia and talked to one of their tech folks who was very nice and had no problem replacing mine under warranty since I'd only had it a few months, and it was at my door less than a week later in AZ.So far the new part, which is indeed a different design than the original with visually different components such as push buttons and such, is working flawlessly. I am about halfway through the first hatch cycle with it, and I'm watching it like a hawk. I have two other incubators running at the same time that I will disperse eggs to at the first sign of trouble, and the fact that I've already made this plan is troubling...Honestly, you shouldn't have to be worried about your incubator outside of normal mother hen jitters.I think the bottom line is, whether GQF will admit it or not, there's a problem with their product. Not all their products, I've got an ancient HovaBator that is a tank and will run forever, lol, and so do thousands of others, but I think that at least the 'production' Genesis controller/thermostat units have a defect in them that rears its ugly head sooner or later, ticking time bomb style. Obviously GQF has changed the part some since mine was produced as the new controller is at the very least visually different from the old one, and maybe they've fixed some of the internal problems too?I think this is product is a great concept, the controls are stupid simple, the huge window is awesome, it really is a great package... if GQF can fix their quality control issues with the electronics, it'll totally be worth the cost of entry.Edit 3/27/15:Gotta love updated reviews right? So, the new updated controller part has worked flawlessly for the last almost 6 months of continuous use (knock on wood), original fan/heating element continues to perform as designed, and as a whole the product is doing what it was designed to do now that it has the updated controller. As such, I'm bumping my rating back up to 4 stars under the assumption that most if not all of these incubators being sold today have the updated design controller and are past the learning/debug curve of the original controller.I really wish GQF would have done something more honorable about their product knowing there was a fault in the design, like send a message out to their distributors saying hey, if this thing breaks contact us and we'll swap out the controller free of charge with the new design. The folks that I talked to when I had mine replaced under warranty were great to talk to, friendly, seemed to really care... Just seems that a LOT of the negative press this little incubator has gotten would have been a lot less negative had GQF come out right away and told folks there was a problem and they were going to fix it.I know, that solution doesn't make the most financially practical sense in the short term, but in the long run maybe it would have kept or brought in a lot of future customers?In any case, I think it's safe to say if you buy one of these, it probably has the new style controller, and will probably hatch you out hundreds and hundreds of happy little chicks over its lifetime, and if I were looking to buy another incubator right now I'd probably pull the trigger on one of these again.