AUTOSAVER88 Fog Lights Compatible with 2009 2010 2011 Civic Sedan 09 10 11 Fog Lamps,with 12V 55W H11 Bulbs,Wiring Harness and Switch Clear Lens

Excellent product. Arrived quickly, were packaged well, look great, perfectly fit the original holes in the bumper, and came with all the wiring needed to plug straight into the Honda harness. No fuss, no cutting, all plug and play.Only downer is the instructions are so brief. Example; step 4 is remove the bumper, remove the old inserts, and mount the lights! That's quite a step - on my wife's Civic that added up to 3-4 hours! If you are a novice at doing things like this go to UTube - there are a number of very good videos on it. There is a wiring diagram that is easy to figure out so the electrical end of it is pretty straightforward.I highly recommend these lights. They're very functional and light up the front of the car even when off. The bright yellow lenses are a real eye-catcher and the light really helps in rain or fog. We've had them on for a month now and are very happy with them.

The construction of the light is good quality, good value and very easy to install.I received a bad fog light with the yellow lens having an issue.Customer service was quick to respond and without question, replace quickly.Thank you for honest service. I would do business with them again. Highly recommend.

Fast delivery good quality with all the parts to install them 👍🏾

Here's the thing. They fit on any 8th Gen Facelift Civic, no doubt. The problem is these fog lights come with a harness that isn't plug and play without extra procedures, any took me a bit of time examining multiple fog light install videos + reading on the 8th Gen Civic forums, where I had to come up with a DIY solution to the problem. Keep in mind this installation tutorial is meant for people WITHOUT a pre-existing fog light assembly installed... if you're one of those people, all you need to do is remove the bumper and replace the old ones. This is for people that are installing fog lights on a car that came without them.So here we go. First off, do not consult videos off YouTube looking for a 1 to 1 installation. You won't find that. You'll find multiple ways to install the lights, such as running the harness through your engine bay, or through the fender liner. I had none of that. For the record, I own a 2010 Civic LX-S and here's how it went down.1. Remove the front bumper. There's clips in place and usually they're stubborn and easy to break, however you can reuse the clips. I don't recommend that however, especially if the clips were never replaced to begin with. Buy a removal tool + set of bumper clips before install. Very easy to do without a prytool, just use a flathead screwdriver + pliers and you'll be fine if you're not aggressive.2. Remove the punch out plastic where the foglights are supposed to be. They're held in by plastic tabs you need to adjust through the hole they're in to remove. Don't just hammer or cut them out.3. Install the lights. Very straightforward. Don't connect anything to them.4. Disconnect the battery. Remove negative terminal, that's all you really need to do. Make sure the connector won't touch it again so you don't fry yourself.5. With the fog light wiring harness, plug in the brown connector to the brown connector that is already on your car. For me, it was on the right side of the car, where the washer fluid resevoir is. It might be black due to dirt, highly recommend cleaning whatever gunk is on it with compressed air, make sure the contact is clean. This routes the power back to a connector under the steering wheel column that will be covered later. Attach ground connector 1 to the bolt on the washer fluid, attach ground connector 2 to the bolt next to the air filter. Do some cable management and make sure you tie down the harness where it isn't conflicting reinstallation of the front bumper.6. Take off the dashboard covers of your car. Start from bottom to top. Disconnect the odometer buttons on the left by pushing on the clip and pulling out when removing the top dashboard cover. Remove the storage unit where the foglight switch goes, it's held in by 3 screws. Retain the screws and use them for installing the switch.7. On the interior harness, there are two red wires. One is connected to a fuse, and another isn't. The one connected to the fuse hanging is the power to the switch. You need to cut the wire and connect it to a fusetap. On the fusetap, I put in two 10v minifuses. Buy a mini fusetap for this. You want to plug in this fusetap upside down on the 6th slot on your fusebox. Double check you understand where the 12v is coming from so you don't improperly install your fusetap and then risk blowing the circuit if something ever happens to your fusebox. The other red wire you also cut the connector off and install a female quick disconnect. This is the wire to your actual fog lights. This connects to the top left area of the fusebox, which has pins sticking out of it in that connector. You plug in the disconnect to the bottom right pin in that specific slot. Connect the brown connector to the other underneath your dash, bolt on the ground to the 10mm bolt next to the fusebox, connect that switch and you're good to go. Tidy up and reinstall the dashboard.8. From there, connect the fog light harness to the fog lights and connect the battery. Double check that power goes to the fog lights when the engine is on. The fog light switch will be lit up all the time, however power to the lights will only occur when the key is in the ignition. That way your battery won't be dead when you come back to it. Reinstall the front bumper and engine cover.I hope this helps. Also keep in mind that since the fog light switch is separate, it is up to you to know when to use the lights at your own discretion. In states such as PA, I've heard you can get ticketed if you run your fogs and your high beams on at the same time, along with having them on in non-inclement weather. Be smart about it. Good luck.

I've had a broken lens that I replaced with a polycarbonate sheet heated and formed to fit. It melted within a month. I recall a replacement set being about $350. So these are a bargain. I didn't need the wiring, but getting a new set of bulbs is a bonus. As others mentioned, they fit perfectly. For my 2009 sedan, only 1 screw holds each light in place from the front so no removal of the bumper is required. I pulled the fuse for the headlights to accurately adjust the height of the fogs. Adjusted the fogs by removal of that one screw and rotating the height adjustment screw on the back of the fog light housing. Easy! They light up the side of the road, maybe better than the original Honda lights. 5 stars!

en la imagen del producto dice que viene con 3 arneses, y solamente me llegaron 2, me hizo falta el que más ocupaba el que va hacia la cabina interior. Soy de Honduras y como hago reclamo si implica gasto extra

Fog light looked great, but the tabs to keep them in place on both side came broken off so could not install them. Pretty bummed, but it happens.

I purchased these fog lights because the glass and bulb were broken on mine. These new fog lights fit but the screw hole on mounting didn’t quite line up. It would have needed a little bit of tuning but I took the light fixture off the new mounting and installed it on the old mounting/frame and Now I know they are well attached to the vehicle. They work great and it was easy because I didn’t have to take the bumper off, just unscrewed the light mounting with one screw from the front of the car!

A l'arrivée du colis les boîtes étaient intacte mais les deux couverts de plastique étaient brisé et comme les autres commentaires aucune instructions d'inclus heureusement que j'avais gardé les anciens j'ai pu me débrouiller mais je n'aime pas payer le plein prix pour de la marchandise brisé... je ne recommande pas .

Not new, mine arrived used, broken, rusted and dirty. Not happy.