Supershieldz (2 Pack) Designed for Samsung Galaxy Z Flip 3 5G Screen Protector, (Full Coverage) High Definition Clear Shield (TPU)

Eight months after getting my Galaxy Flip3 5G, I had to have the original screen protector replaced under warranty. Everyone knows it's a crappy design that cracks at the fold. Ten months later, I spent $70 to have a factory screen protector installed on the phone that was now out of warranty. Due to phone hinge wear, the new cover failed by separating from the center of the screen after just a few days. I love the Flip, but was sick of the crappy, stiff, factory screen covers. I had already started looking for a new, non-Flip phone upgrade when I thought about salvaging this phone myself. For $8, I'd try this inexpensive screen cover because it had good reviews, and two covers are included in the package. (It always takes me at least a couple of tries to put these things on.) It has a slick way of lining up the cover on the first try. You MUST follow all of the instructions on the back of the package in tiny print EXACTLY. After I put the screen cover on, there were plenty of bubbles. Many were larger than the micro-bubbles that they say will disappear after a day or two. I really didn't believe it. I pushed them out as best I could after it was installed, and then I tried to disperse them again after several hours. There were still many bubbles left, but they were smaller. I honestly didn't think they would disappear after a day or two as they promised on the packaging. When I woke up today and checked the phone, all the bubbles were gone. It turned out to be a perfect installation after all! I did not expect that and really thought I would have to use the extra screen cover in the package for a second try at it. I don't know how long this will last, but for the price and ease of installation, I'll gladly do it again if it wears out. It also saved me the $1200 I was planning on spending on an unnecessary Samsung upgrade. Bottom line - This screen protector looks great and is definitely worth a try.

After about 16 months of use my zflip3 (which I love) finally started showing wear on the screen at the fold. It was just the factory fitted screen protector beginning to separate from the screen. The phone was still usable but it looked unsightly and I could see particles of dust getting under it, which may damage the actual screen. As Samsung advises, I took my phone to the local "UbreakitUfixit" who are an authorized Samsung repair shop. They said it would cost $35. A little high, but I needed it fixed. But they then insisted I give them my phone with the PIN for 3hrs as they needed to run Samsumg diagnostics on it. My life is on that phone - banking, 2-factor-authenication, email which could reset all my passwords on virtually any website, my facebook, plus remote access to servers and systems I manage at work. I just could not do that. I've no idea why they need this just to change the screen protector? So I went to youtube, and found a video of how to replace the screen protector, and it used these ones. I purchased them (they come 2 in a pack) for a few dollars. I put the youtube video on my PC again as I worked. It took me about 10 minutes at most and now my screen is virtually perfect. There is a tiny bubble that I could probably force out as its close to the edge and barely visible, but others have said these tend to disappear after a little use. I'll keep the other protector in the pack just as I imagine I'll have to do the same in a year or so. The process was pretty simple if you watch the video a few times first. Take your time, make sure you're working in a dust free environment that is well lit, and you shouldn't have any problems. If you don't get it right first time, there is always the second protector to use.

So now that i have the screen cover on, the screen cover in itself seems nice. It has everything included to help you be as dust free as possible while installing the cover. It comes with good instructions, they made sense to me. BUT, this is where I get upset a bit. I have put screen protectors on all of my phones since the Lg Dare? but this was the first one I have purchased that AFTER i applied the screen protector, i noticed i STRETCHED the protector with every strong swipe of the scrapper tool to help push out the bubbles and make it lay nice and flat on my phone screen. Just applying the pressure with the scrapper, everywhere i see ripples in the protector, like every swipe put micro ripples in the protector. I thought i was crazy the protector was this soft, as every other one i have ever had was hard plastic-like. Possibly to be more bendable for the Flip 3 and its bending screen? But then also, I saw a little bubble, and i went to use the back of my thumbnail to push the air out the side of the protector, and my fingernail caught on the bubble and scratched it a bit... so this protector screen seems really soft. I have only this installed on my phone for the past half hour, but i have some things i want to monitor: 1) I see people say the micro bubbles go away after a couple days... so maybe even the ripples from stretching the protector might even go away? I hope they do, even if just a bit. 2) It just seems soft, curious how it will hold up to rough calloused fingertips and constant use over time. Positive: They give you more than enough of everything to fully install a new protector on your phone. The protector seems nice and sticky. It comes with two screen protectors. I will say like everyone else: "I'll update you in X amount of time"....Listen. I will try as I myself LOVE when people actually update their reviews. But life is silly and updating a review in a month or so just may not be the biggest priority by then. I will try though. Ha. UPDATE 11/13/22 Screen protector still has every stretch mark and fingernail mark - It is just a softer screen. I will say it still is tight to the screen along the whole edge and still looks good though! UPDATE 4/16/23 Still on my screen and it is exactly the same as the day I put it on! Still gets new indents from anything like a strong fingernail, but the whole edge is still stuck great and not peeling up anywhere. And I use my phone a lot. Kudos to this phone screen cover.

Como muchos tenía miedo de cambiar la mica de mi Flip 3, después de ver el tutorial de la mica y más reviews me anime a hacerlo. Lo único complicado es levantar la mica anterior, ya qué se tiene que hacer sin poner mucha presión para no dañar la pantalla. Fuera de eso el video de la mica viene bastante completo, así como todo incluir todo lo necesario para hacer la instacion. Ya llevo 2 semanas con la mica nueva instalada y no hay ninguna diferencia de la que traía de fabrica. 100% recomendado! Posiblemente compre un set más en caso de tener que realizar el cambio en el futuro.

Super impressed with this product! I had originally replaced the screen protector on my Z Flip 3 with a screen film from Madico called Protection Pro. Unfortunately that began to lift immediately. I purchased this screen protector with high hopes and wasn't let down. If you've ever installed a screen protector you'll have no problems installing this one. Applying this protector is made simple by breaking it down into a few steps. I applied the protector with a different squeegee (the one provided is too wide but can be easily modified to work) and the only issues I had was trying to align the screen protector perfectly. It took a few tries but in the end it lined up great with nothing under the protector. Once the protector was installed there were a few little bubbles but I let the phone sit open (not folded) so the protector can adhere better for a day before I try using the phone. After a day the couple bubbles I'd seen had disappeared. I'm so happy with this brand! I have been repairing cellphones and other tech for a decade and was a bit skeptical about this protector but after installing I'll be recommending these to anybody that needs a protector for their folding phone.

Instructions straightforward and replacing was easy to do. Phone looked as good as new. No issues with air bubbles etc. Would recommend and would use again.

I never thought I'd see the day where I review a Screen Protector, but... here we are Bought this kit for the Z Flip 3, and installation was an absolute breeze! You do need to concentrate a little bit while doing it, but with the instructions on the back along with the video, it's super simple to install My ONLY complaint with the kit is with the included "Squeegee", which is a thick cardboard card piece with some fabric over one of the edges to help with removing bubbles. Unfortunately, the edge where the fabric is installed is larger than the screen of the Z Flip 3, making it slightly more difficult to use. Saying that, I was still able to apply the Screen Protector with ease, so maybe it doesn't matter that much!

Amazing product; easy to apply and better than samsung original. Worth it!!!! 👍🏻