Ibywind Screen Protector For Xiaomi 11T/11T Pro(5G)[2 Pack],9H Hardness Tempered Glass,With 1Pc Camera Lens Protector,Easy to Install

Having tried 2 other manufacturers before this I can say this product is by far the easiest and best for installation. I tried the glass and the curve doesn't fit well, lifts and also doesn't allow easy use of the touchscreen. I also tried a different tpu make and used all 3 in the pack without managing to get it bubble free. Whereas this product worked at first attempt! The only part of this pack that is of lesser quality is the back protector. But it is unnecessary and not simple to fit. So use this product with a case...

Screen protector was straight forward to fit using the guide. Wipe down the device, and use the dust sticker to remove any floating dust right up until you place down the protector. Easier to do in a well lit room so you can see and remove any dust. No bubbles and still have the 2nd in case of an accident. The metal camera protector took all of 2 seconds to apply, wipe the area with the alcohol wipe and place it on. Only con to this is that the camera module didn't quite for back into the case provided with the phone. The back skin is a nice bonus. For best results wipe down the back with the alcohol wipe, remove half of the skin (the upper camera part) and position it around the camera until happy, then slowly press it down from the centre downwards and work back to avoid creases. Happy with results and price. Would buy again.

I decided to get this tempered glass screen protector kit for my Xiaomi 11T phone, as the other reviews looked OK and I liked the idea of the extras in the box (two protectors, camera protector, fitting "jig" etc.). Price seemed OK. It's supplied with the usual screen clean up cloths etc. but the clip on plastic fitting jig was really helpful. I spent a good 5 minutes cleaning the screen and making sure every spec of dust was removed, before fitting the protector. With the guide it was easy to fit in exactly the right place. Annoyingly, there were some air bubbles that took some time to work out, but with some careful use of a cleaning cloth and applying some pressure to the spots where the bubbles were, I was able to push them all out and it now looks perfect. Now it's fitted properly the touch screen sensitivity is still excellent, and the reduction of screen brightness is not at all noticeable. Also the glass used, or it's coating, seems to resist fingerprints better than some others I've used on other phones. Now regarding the extras. The metal camera protector was easy to fit and I think does provide some protection for the large lens group of the Xiaomi phone. The carbon effect vinyl "wrap" for the back of the phone was unfortunately very difficult to fit correctly. I may have been doing it wrong but applying it straight first time, was nigh on impossible, and eventually bits of dust and stuff got stuck to the material after repeated attempts, so I gave up. It's minor as I'm not too concerned about the back as I'm putting the phone in a case anyway, but just note it's not easy to apply. Perhaps changing it to a wet application with spray and a squeegee (like you do for car window tint film) would be the way to go? This would allow you to reposition the film until you were satisfied with the alignment, which is impossible with a dry application. Overall though the main parts I cared about - the screen protector and the camera protector is very good.

You put these on and wonder if you've wasted your money, well I did anyway, until today. I thought I'd put my personal phone into my pocket along with my works phone but it must have dropped out and onto the supermarket car park. It was only when I got home that I realised it had fallen into the ground. When I got back to the car park, there it was, face down, my heart was in my mouth. It had clearly been run over, there was a tyre track on the case. I looked at the screen, it appeared to be shattered and had big pit marks around the sides of it, I thought the screen was fubard! When I got home, I prized the screen protector off and there wasn't a single scratch on the phone, the screen was like new. This has literally saved me many, many £'s, I can't recommend the product enough and the best part is there are two protectors in the pack so my phone is now protected again.

Can't fault this product. Comes with an easy to follow Instruction leaflet and instalation tools. It's not a hardened glass protector which I thought it would be but a silicone gel type product. Comes with cleaning cloth, dry cloth and dust remover sheet and a handy plastic alignment tool. The protector fits perfectly round the curved edges of the screen and doesn't interfere with the phone protector. Had no effect on the in-screen finger print scanner and responds just as well as if it wasn't there. Also comes with a back of phone protector and a camera lens surround protector. I took this off as this did interfere with the camera case and even without the camera case was affecting the flash when it fired. Above all though 9/10!

Everything very good with rear side: cameras protector, cover. Looks nice and good quality. Just the front glass has cracked even the phone had not been dropped or hit. Perhaps the edge was touching a wallet or pen in a purse.. Last it jus over a week.. Good that in this kit are two protection glass. Will try to put on second and with hope it would last longer.

I looked around for a screen protector for my phone and could not find anything suitable apart from this package as the other protectors did not have a hole for the front camera and were ambiguous as to whether it would be for the 5G NE VERSION. This package is pretty amazing it comes with a mount that you put your phone in to line up the Protector perfectly. Obviously you have to remove the factory screen protector which is rubbish then, First you have to undo package one a wet wipe to clean the screen thoroughly and then undo package two to dry the screen thoroughly and then package 3 to remove any particles of dust. Then just simply unpeal the screen protector and place it on the screen and the mount guides it in perfectly. Squeeze out any air bubbles and the job is done. You also have the option to put on a protective layer for the back and a robust protective casing for the camera. If you own a Xiaomi 11 lite 5g NE - this is the only product you should consider it is quality just make sure you follow the instructions to the letter.

I now realise why this product is financially as cheap as it is! 1. Both screens had minute indents, like stabbed with a ballpoint, that wasn't noticed until placed over screen then it created a visible air pocket 2. Great application kit ... alas once in place, the screen slides and then eventually allows air under which in turn bleeds the lift across from whichever corner lifts first! OK, the phone is in a case and initially used to carry phone in back pocket so assumed this may have contributed. Stopped carry phone that way and screen still slid.

Türkiyedeki sıradan ekran koruyucularla kıyaslamayın. Bunun içinden kendinizinde yapabileceği herşey çıkıyor. Temizliği için kuru ve ıslak mendili,ekranı hizalama aparatı ve ekran koruyucu iki tane geliyor. Çok beğendik. Teşekkürler.

The best screen protector for Xiaomi mi 11 value for money plus they giving you back cover sticker and lens protector

غير مطابق للطلب . لا انصح بشرائه

ottima per nulla ingombrante sembra di non averla, per ora non l'ho graffiata e lo tiro fuori dal marsupio continuamente, quelle plastificate durano niente con me

Bon rapport qualité prix. Matière en verre, un peu plus fragile mais super qualité pour la vision. Mise en place facile en respectant le mode d'emploi livré avec. Une fois placé,sans bulles, vision et nettoyage facile. Livré avec une protection de réserve. Vraiment à conseiller.