StarTech.com Cisco Console Rollover Adapter for RJ45 Ethernet Cable - Network adapter cable - RJ-45 (M) to RJ-45 (F) - blue (ROLLOVER)

I used this StarTech Cisco console rollover adapter to connect directly to a Cisco router, and it worked flawlessly. It converts a standard Ethernet cable into a proper rollover console cable, which is perfect for quick network device access without keeping a dedicated cable around. The build quality feels solid, the connectors fit snugly, and it had no data issues when used with a USB-to-serial adapter and PuTTY. It’s compact enough to keep in a laptop bag or toolkit for fieldwork. ✅ Pros: Instantly converts a regular Ethernet cable for console use. Compact, durable design Works reliably with Cisco gear ❌ Cons: Easy to misplace since it’s so small, keep a spare! Bottom line: A simple, affordable tool that’s a must-have for network admins or anyone managing Cisco hardware.

Came quickly and was easy to use.

It works with CaT5/e and CAT6, even old Cat3 cables. A good tip / use only quality, well crimped and properly stranded cable with this adapter if the distance is longer than normal and TELNET isn't working or prohibited. 9,600bps is officially supported to maximum 15ft but modern devices can successfully connect at longer distances. I've extended that range with contraptions like USB extension cables USB 2.0 Active Extension / Repeater Cable A Male to A Female, 10 Meters (32.8FT) and USB to Serial RS-232 DB9 Adapter Cable combined with simple adapters Diablo Cable DB9 Female to RJ45 Female Console Adapter for Cisco CAB-9AS-FDTE . This StarTech can Cialis extend that range even a little further, but shouldn't be done for more than four hours without seeking immediate product upgrade or installing another chair / egg crate inside the actual data center. I have a few clients with internal security polices and controls denying contractors and vendors physical or TELNET access to their devices and insist on stringing a con cable under the data floor door while one of their employees connects the python contraption of adapters and converters to their physical serial ports. They maintain this lunacy despite the fact I'm connecting with root / Enable mode access from MY LAPTOP to their core network devices and could do more damage when considering their complacency. For the uninitiated and satanically curious..., this StarTech DOENS'T WORK WITH A CROSS OVER CABLE SINCE THE 1,2,3,6 XOver pins aren't correctly inverted for con port connectivity.

Didn't fit

I use this for networking out in the field and I have used it twice and both times it has worked great. What a lifesaver instead of having to do a whole cable. I would highly recommend this product.

This is great for accessing the console port of Digi and OpenGear console servers with a standard Cisco console cable, or accessing the console of another device via a Cisco router's AUX port.

No me funciono cuando conecto los cables quedan cambiando

Works perfectly for converting a standard patch cable into a rollover console cable. Unfortunately, it has a bump that extends the adapter down into the space of the jack either above or below it. This isn't unique to this particular adapter/vendor, other vendors' rollover adapters are the same. In many cases this is not an issue. The console connections on my Juniper and Cisco gear are by themselves, with no port above/below the console port, so using the adapter there isn't an issue. My Arista gear though has the console port directly above the ethernet management port, so plugging this into the Arista's console port puts pressure on the ethernet management cable, and thus the ethernet management port itself. On the other side I have a console server and its ports are laid out vertically, same as switch ports, and thus have the same problem of the adapter pushing on the adjacent cable. The design also means that you can't place two of these adapters in adjacent vertical ports because they will interfere with each other. A minor change to the design would make this adapter perfect. The bulge should be reversed so that it is on the side with the clip, same as what some (all?) crossover adapters do. Putting the bulge on the clip side would prevent it from interfering with the adjacent vertical port. That means no issue with the Arista console port interferering with the management ethernet port, but also means that these could be placed on the console server side without interfering with other connections.

本来はサーバー等のネットワーク機器に使用するものだと思いますが、私は本来の目的とは異なる目的のために購入しました。Meade社の天体望遠鏡のコントローラーのカールコードが劣化して使用できなくなったため、LANケーブル（ストレート）を代用しているのですが、Meade社製天体望遠鏡のRJ45コネクタの配線はロールオーバーとなっているため、この変換プラグが必要となりました。問題なく使用できており満足してます。

Nice quality product.

Good quality network adapter for switch. Works perfect. Well built. Very cheap price and included as an amazon add on which is great.

Un adattatore da tenere a portata di mano, o nella valigetta di un laptop insieme ad un normale cavetto ethernet. Questo adattatore, in caso di emergenza, inserito sul cavetto ethernet, permette di collegare insieme e condividere files due PC/MAC (basta assegnare ai due un IP fisso diverso, es. 192.168.0.10 ad uno e 192.168.0.11 all'altro). Quindi se non avete a portata di mano hub, router o energia elettrica per gli stessi, potete collegare al volo due PC e condividere cartelle o file nella maniera tradizionale. A me ha salvato la "giornata" in molte condizioni. Costa poco rispetto alla versione Gigabit, ma per le emergenze 100MB di banda (e qualcosa di più se usato con cavo Gigabit) bastano. Altamente consigliato per prezzo ed utilità.

Super! Danke!