Mount-It!Dual Monitor Mount | Double Monitor Desk Stand | Two Heavy Duty Full Motion Adjustable Arms Fit 2 Computer Screens 17 19 20 21 22 24 27 Inch | VESA 75 100 | C-Clamp and Grommet Base

I got this to go standless with my dual-monitor setup. I originally had a 24-inch and 27-inch pair, which worked fine, but there’s no really good way to adjust the individual heights of each monitor separately, so you’re basically stuck with whatever their vertical alignment is based on the mounting locations.I replaced the 24-inch with a second 27-inch a while ago. Being the same size and the same model, I don’t have to worry about them being much off alignment now, so that becomes a non-issue. There isn’t much wiggle room at this size though — I have them basically perfectly side by side in the only position they really can be while still being together, and I still had to curve on monitor inward slightly.For weight, my monitors are chunky, probably around 15lbs each. I’m more concerned that my desk will give out at the connecting point before this stand does, so it holds up quite well.I also appreciate the cable management clips. Simple, but effective. Only other downside I can recall is that the instructions confused me a little bit on whether I actually needed to swap out a piece before setup (I believe they have an alternate piece for distributing weight differently). I didn’t have to, but if I had, it would have been near-impossible due to the inability to get a screwdriver into the correct position to unscrew a bolt. Wasn’t a big deal, but figure it’s worth mentioning.I also would have preferred if it came in white, because I’m sort of over dark colors on my desktop, but since this isn’t super visible it’s not a real demerit, just preference.Overall, can recommend!

I bought one of these a couple years ago for my home office, and it's done well. So well that I just bought a second one for a different workspace. It holds two monitors with minimal jitter, and is very adjustable. The cord management is adequate, and the mounting options work well. To be fair, I haven't used the provided clamp, choosing instead to hard mount the thing in both of my applications. However, the clamp seems robust and I have every reason to believe it would do okay.The instructions leave a little to be desired, as they are primarily pictures. But they're not as vague as others I've seen, and get the job done. Overall it's a good value for a solid, sturdy monitor mount.

I purchased this Mount-It! Dual Monitor Mount to replace a mount that took up too much space and was not as articulate as I needed for comfortable viewing of dual monitors. My desk area is small so I needed the 'arms' of the stand to be moveable enough to accommodate the tight fit; this Mount-It! unit works well in the space. Fully articulate ability allows for customizing position and view.Main frame all metal construction with a few plastic fittings. Assembly and installation was straightforward as the instructions were clear and accurate. All parts/tools were included per the guide making set up quick - about 30 minutes. I only needed a small Phillips screwdriver.There is a bit of play in the monitors but once positioned, they aren't going anywhere. Cord management clips are included and effectively hide cables behind the monitors. Overall, the device is hardly noticeable. It's small footprint frees up surface space on my tiny desk and allows for more work area. Four stars to allow for durability over time. Price is fair for construction and sturdiness feel. Recommended.

I've only had this thing installed for a day or so but it was everything I expected it to be an more. Installation was fairly easy. Maybe a 30min set up, probably closer to 20mins. I currently have it configured using the clamp with two 24" monitors and I don't see any issues with deflection or weight. The arms move and adjust easily enough with one hand. Construction seemed good and for my use, I don't see any potential for failure. The included cord management was a plus.If I have to be picky, the only real thing I can comment on is not being able to get the monitors aligned next to each other without a gap. This is primarily due to how I have them mounted though. I have it flush mounted against a wall, which prohibits the arms from being able to articulate in a way where they could touch. I thought this might be an issue but the current location is only temporary and this won't be a problem in the final location. An additional set or two of holes for the monitor bracket along the arms would easily solve this issue.Bottom line: At less than $40. Buy it!

I purchased this stand to use with two Dell 24 inch monitors. It works beautifully and I am very happy with it. There are much more expensive stands that allow more freedom of movement and have gas pistons for smooth movement, but I didn't need any of that. If you are constantly going to be readjusting the monitors or moving them so someone else can see the screen, this might not be the best stand for you. But if you are going to set up two monitors side by side and not move them around, this is a fabulous stand and a great value. It was easy to assemble, plenty strong enough for the monitors I bought and only required me to move the desk about 4 inches away from the wall. This type of monitor stand used to be much more expensive and I was a little skeptical that they had come down in price so far, but I am very happy with this stand.

Buen producto, se ve resistente, el armado es relativamente fácil ya qué no viene marcado la letra de cada pieza a como viene en el manual. Un punto en contra, al menos para mi caso, es que la altura es algo baja, esperaba que los monitores quedaran un poco mas arriba.

Great stand. I mounted 2 - 20" Dell monitors on it. Although they are older, heavier flat screens, it had no problem with the weight. The stand is very well built with a lot of adjustments.I did have to modify my IKEA desk to accommodate the clamp mechanism, but that wasn't a big deal. With 20" monitors mounted, the arms are bent more than expected which means that the desk cannot be placed as close to the wall. Overall though I am very pleased with the instructions, quality and functions of this unit. Great for the price and would definitely purchase again and recommend to others.The mount also offers great included cable management and offers storage in the stand for all of the allen wrenches needed to adjust the stand. The mount is solid with very little sway and I feel that both monitors will hold with no problems.

The bushing found in the clamp for the mounting arms (the thing that allows up and down movement) is way too tight on mine and can't even fit onto the rod thing. I've loosened it to the point that the screw's not even fastening anything anymore, still doesn't move. I've forced it on, but really should've destroyed the bushing before doing so, cause it's now stuck at the highest position.

The mount would not hold my acer monitors. They were within weight spec and size spec. The end bracket where the monitor connects to the mount kept falling causing the monitor to sway facing downwards.

Order came same day which was great. The mount is very sturdy and was easy to install (one person install). I do wish there was more clearance under the monitors, but that depends on what monitors you mount, plus I knew the limitations based on the pole length before I purchased it. With my configuration I have 9 1/4” between the desk and the bottom of the monitors. All in all I love it and would recommend.