30 Pieces 2.6 x 0.8 Inch Silicone Thermal Pad Reusable Thermal Conductive Silicone Pad Each Thick for Gpu Heatsink Cpu Chip Heat Conduction or LED Heat Conduction (Light Blue)

Its really good anf make coold the ps4

Cheap but quite thin and not as good as the OEM it replaced.

This is the first time I replace thermal pads. So, no experience to compare.Having said that, I bought a second hand GPU and sadly idle temps were around 60c when they should be around 40c. Under heavy load temperatures reached up to 92c.I really thought that I had lost my money! seller said all working as it should! liar!Benchmark was good so I assume the electronics were ok. So I decided to do my first re-padding and new thermal paste. The old pads were melting and the paste was like cement.These pads came next day delivery.All done now. Idle temps under 40c and under heavy load 65c max.Time will tell how often they would need to be replaced.I am very happy with this product.

The thermal pads application in my case was for memory modules on an rtx 2080s strix asus card.Beforehand, I replaced the thermal paste only and neglected the pads. The temperatures of vram were reaching 95 degrees (which is still in spec) but wanted cooler temps.With those pads being replaced with this product, the temperatures not also climbed really slowly after... but after very long periods of heavy load the memory modules never exceeded 75 degrees! This allowed me to feel safe overclocking the memory by 250mhz extra.Im sure they can be used in other applications but there are very little issues that I wouldnt consider them in any way significantThe pads are all same size and some had to be cut to size. The cutting with scissors was not too easy... maybe a knife would have been easier. But a massive plus to consider...On ebay those pads in much smaller amounts are wayyyyy more expensive for some reason. This product seems to stay within good price!Overall, highly recommended from myself to anyone into any DIY electronics servicing

As Title says, they are good at what they do, but only if there is ENOUGH HEAT to keep them in-situ. At Low Temps they really do not behave well. I used for attaching a Heatsink to a bank of Voltage Regulators, they keep coming 'Un-Stuck' - not helpfull at all. If I let the VRs heat first, then attach the PAD to the VRs followed by more Heat then the Heatsink OK.

I have a faulty RX 5700 XT and used this pack of pads to replace the thermal pads on the GPU along with artic paste.I still had the overheating/artifacting with the thin pads but I then used the thicker ones from this pack instead and so far I haven't had the dreaded graphics card crash. Worth a try.

These had worse thermal performance on my 3090 GPU than the grey pads I replaced, even though the old pads were crumbling to pieces.

I have a fairly high en HP Omen laptop (2019) but i noticed it was running quite hot so i decided to repaste the cpu/gpu. I ordered artic Mx4 paste and these thermal pads. turns out ive made things worse, i do not know if it was the paste or the thermal pads. Will let you know in due course.