PopSockets: PopGrip Slide Stretch Non-Adhesive Phone Grip & Stand With a Swappable Top for Phones with Rounded Case Only - Dove White Marble

Bought the curved one and it fits on my Pixel 6 Pro without a case, and seems to hold it securely enough though it does slide easily. It also fits on a bellroy leather case very snug and doesn't slide without quite a deliberate push. Using this in one hand is easy. When Popsocket is flattened and the phone placed on its back the top of the phone (camera bar) will touch the table because the volume buttons mean the Popsocket can only sit lower down the phone. The Popsocket doesnt really let the phone stand vertically very easily when in normal position but as a horizontal stand it is always good. Would recommend if your phone is too big for your hand to hold!

I love popsockets, but I can't always stick them to my case. They can be a bit of a pain if it's a silicone case...they won't stick, and if the base is stuck in place, the entire case must be removed to wirelessly charge. This grip is ideal. It can be removed very easily and swapped between devices within seconds. The only issue I've had sadly is due to my phone. The volume rocker on the pixel 7 pro is quite low, therefore the grip has to be positioned at the bottom third of the screen. This is a little low for comfort and when using it as a stand in landscape mode, the phone sits at an angle. On the whole though, it's very useful and I like it a lot.

Good because I need it but it makes a creaking noise which isn’t noisy until it’s late at night and all quiet and then it annoys your roommate 🤣

Absolutely love this holder. I always hated how difficult it was to know exactly where to put the sticky pop sockets, and then they are in the wrong place when I want to use the camera or watch a video in landscape. This changes everything! Really easy to move it up and down, the springs are very sturdy and there's no way it's falling off. I've never had an interchangeable top on my pop sockets before, that's a great feature so I can change the look if I want to. As with other pop sockets, I find the actual size of the finger grip to be a bit too large to be perfectly comfortable, I could do with my fingers being slightly closer together. But it's a really minor point. Also, my new pixel 6pro has the volume buttons bang in the centre of the phone side so there's a limit on how high up I can place the grip. But it hasn't been a problem so far. I'm using a spigen phone case and even with the curved edge of my screen, the pop grip doesn't interfere with the screen function at all. I still begrudge paying more for the grip then the actual case cost, but it's innovative so I guess it's worth it.

I had previously used a Pop Socket which you stuck to a phone case, & when I upgraded I didn't want to stick anything to a case to allow me to use Magsafe, but this PopGrip is fabulous - no sticking to your case, it just grips the sides of the phone securely & can be moved up & down to where you want it, allowing you to use Magsafe, but sturdy enough to allow me to prop the phone up & allow me to take photos without the fear of dropping the phone! This has made me so happy, & I highly recommend it!!

Pixel 6 phone users might be interested to know this. Without the case, it sits fine. With a case you will see gaps between the phone and the clamps, which is not aesthetically pleasing. Other than that, it does what it's supposed to do, which is help prop up your phone. Portrait or landscape. Keep in mind that landscape mode might leave your phone a bit tilted cause of the clamp. Wireless charging also works. But have to twist the disc counter clockwise to remove it then place the phone on the wireless charging pad.

The best for small hands with big phones. I have had mine for over a year and a half for my iphone 14 pro max and it is amazing. I love how adjustable it is. As a girl I just love changing my covers so this is so perfect since popsockets are expensive to keep purchasing and phone cases get dirty so easily. These ones specifically come with adjust, stretchable loops so it can fit over any phone cover. I had to order this for my sister in law too as she got a new bigger phone. Although the design has faded on my old on (which does not bother me) , the outer 6white has not stained AT ALL which is amazing especially in the kitchen with dirty fingers! Just marked up a little from dropping it.

I'm happy with this. I just got a pixel 8 pro and it's bigger than my last phone so needed the extra support. I liked the idea of being able to remove the popsocket for putting into a holder etc. The pixel 8 pro with the official case is the absolute maximum width this clip will extend to, so just bear that in mind. Definitely would recommend it.

Only thing I don't like is the price considering the fact that it doesn't take much rough handling to fall apart. Me, I'm crafty. Dad's a Tech Mechanic, Mom's an Artist so when it popped apart the first time it was easy for ME to figure out how to put it back together. But if you're not mechanically inclined, you may not have the same experience I did. lol. But in terms of convenience and functionality, I love it! It's extremely helpful to be able to move where the pop socket is or just remove it entirely if need be for use with ringlights, tripods, and other phone mounts, etc. So, so far, I dig it! I can just see it having a short lifespan if you don't use it carefully when moving/ removing it! 🤗 #✌️❤️🤝👊 @ani_r_u.0akley *UPDATE 08/30/24* Sturdier than expected! Has held up well! The plastic of the pop socket itself gets grimy and browned pretty quick but if you want you can put different pop sockets on it so eventually that's what I'll probably do. Overall a great item so far though!

Love this pop socket as you can use it on any type of phone and reuse it on a different case. It’s a little expensive considering the size, but, inflation. So, can’t help that I guess. Also, the packaging it came in was super large for the size of the product meaning there is more waste. Definitely could have been sent in a smaller package.

Works great

Har haft den på en Galaxy S21 Ultra ihop med ett Spigen Liquid Air Case. Sitter helt okej, kan lossna ibland. Gummibanden som håller ihop den gick sönder efter 3 veckor tyvärr. Går enkelt att åtgärda med o-ringar som finns att köpa i vilken järnhandel som helst.

After purchasing a silicone case and new pop socket (which did not stick) I saw a video with a very elaborate, time consuming & potentially dangerous process using a knife to dig into the case to put a pop socket into a silicone case. 🙄🥺 This small device works great, stays on but can be easily removed when I want to mount my phone on a tripod to film something, which isn’t even always necessary because it can be pushed along the sides to reposition and get it out of the way. There is a nice variety of images when you want to switch the look because the disc twists off..but you do this with a precise, distinct movement. Unless you are doing that, this part is completely stable!