iSANMATE PLA Plus Rainbow Filament 1.75mm, Fast Change Multicolor, Bluish Green, Purple 1KG/2.2lb

It looks good and it’s the same size as listed so you don’t need to worry about that. I made a cross to go on a necklace and if the sun touches it for a couple minutes it could glow for hours. The quality is great and is worth my money. I would recommend this product to my 3d printing friends.

The color is vibrant, consistent, and looks amazing on finished prints—exactly what I was hoping for. It has a smooth, rich tone that really pops, whether I'm printing small models or larger pieces. Print quality has been excellent. The filament feeds perfectly with no jams, and layer adhesion is solid. I’ve had zero issues with warping or stringing, and the surface finish is clean and professional-looking every time. It’s clear this is a high-quality filament, and it’s become my go-to for any projects that need a bright, eye-catching pink. Highly recommend for anyone who wants great results and reliable performance!

Review is for the: "iSANMATE 3D Printer Filament, PLA Filament Glow in The Dark, 1.75mm Dimensional Accuracy +/- 0.03 mm, 1 kg Spool" As with most any filament from the factory... it works best when dried for 10+ hours. Many people report how brittle this filament is & yes, wet filament is brittle. So, dry it first. Then it will work well. I have had great prints with the Glow filament. After charging off a Bright light for 20 minutes, it will last for a few hours. Thicker prints works best of course, as there is more product to glow. Good detail can be printed with this. Important to have the settings correct, as the Glow is actually a PLA+ which melts at a higher temp than PLA. Appears to be a bit stronger than PLA, but not like a CF or PETG. I would purchase again. Be sure to dry it first.

I had heard that PETG is somewhat difficult to print so I had to try it out. Adding carbon fiber to the mix sounded just like the challenge I was wanting. To my surprise, this filament printed beautifully on my Neptune 3 Pro with minimal changes to the generic PETG built into Cura. It's perfect for functional parts (I printed fixing brackets for the MGN12 rail I used to update my laser's x-axis) and the visual quality is much better than most PLA I've used. There is an oozing and stringing issue but after tweaking the slicer settings (temp, retraction, travel), it greatly reduced that problem. The color combo was also a selling point since there is variety without having to shell out $30 each for 1kg of each color. I didn't receive a spool of the brown but I did receive 2 rolls of blue (I contacted the seller but no response but it's a minor issue). Overall I am quite pleased with this filament and going forward I think that I will move away from PLA in favor of PETG--it just prints beautifully.

My first batch of this filament was good. Read my original review below. Not sure what happened, but this current batch is absolutely terrible. The first batch at least looked like it matched the colors. This batch, even though they were all different colors, all looked green. Not a problem, just annoying. The real problem is that it is so brittle! It snaps mid print, and even to the point it became extremely hard to unload as it kept snapping. Lastly it appears to glow less bright and for less time. Really not a good experience at all. I definitely won't be back for more. Sad. I'm new to 3D printing, but I have been a quick study and I'm starting to get some really cool stuff coming out of my Creality Ender 3 V2 Neo. I bought this glow in the dark medium to get some Halloween decorations ready for myself and my friends. The filament loaded into the printer fine and I never had a problem with it not sticking to the base or getting caught in the feeder. The haunted stump took 12 hours to print and it never had an issue. When it came time to unload it to put my normal filament in, it came out without a hitch all in all I'm very happy with the product. I just wish that they sold the colors individually as running such a big print ate through my green spool pretty quickly! ;). PS - It's been two week since I printed this and it still glows super bright in the dark.

I bought this because I love glow in the dark things and so far so good. I’ve been working through the filament because I hate dealing with extruding new filament. I haven’t had to change any options from my normal PLA setup, so ease of use is solid…I haven’t had any printing flaws with it either, despite attempting more and more complicated prints. Looks-wise, when it’s printed and viewed in normal light the print looks like a cloudy semitransparent piece. Once the lights go out the glow is present, but since I’m sort of a cave dweller I find I need to use a black light to get the full effect. If you’re placing it in a sunny area to charge up you’ll be fine, but if you’re only under artificial light you’re going to have to let it charge quite a bit. All that said, if you want to simply give someone else or yourself a sense of awe in your projects, this is fantastic!

This filament printed really well. The worst part of some rainbows is that the gradient isn't smooth and looks more stripey than transitional. This filament does not have that problems and has a beautiful smooth transition from one color to the next. The colors are rich and saturated, absolutely nothing negative to say about it. This filament is not rapid color change, so if you like printing dragons like I do, this will give you nice slow transitions without repeating colors. You can still achieve at least 2 colors if you print multiples of a few small prints. We recently bought a Bambu Labs printer and the plastic spool works great in the AMS. I had no issues with adhesion when switching colors with other brand filament within the same print.

Filamento fantastico, è resistente ed è davvero fluorescente!!! Escono dei lavori bellissimi

non un granchè al buio. ciononostante fa il suo dovere.

El filamento creo que es de muy buena calidad, no tuvo ningún problema al imprimir, su.color cumple con las imágenes que se están mostrando. Creo que por el precio es un buen filamento

Si diámetro estándar lo hace compatible con la mayoría de impresoras domésticas. Aunque lo compré para mi cuñado y no tengo mucha información sobre su rendimiento, el hecho de que ofrezca efecto luminoso aporta un extra creativo para piezas decorativas o útiles. Si su calidad de impresión es la esperada, podría ser ideal para proyectos originales que quieran destacar en la oscuridad.

Great Bundle, I like it. I did not have any problems with it. From my observations, it is better not to iron the top layers, because it mixes the colors and they become darker. You should play around with the test samples before you know if you need it with this PLA In general, I have positive impressions from using this PLA. Printing is as easy as with PLA from Creality. And it is not as fragile as silk PLA from ELEGOO. Not sure why it has a rating of 4.2 out of 5 while the ELEGOO has a 4.5 out of 5, although I had more problems with the last one. In the photos, the pot is printed using Orange-Green-Blue. As you can see, the layers are even and the colors are placed symmetrically. The T-Rex - Gold-Purple-Copper. The Dragon - Red-Yellow-Blue. The Cat - Rose Red-Green-Blue. (but I am not sure, since printed them some time ago XD) Totally recommend to buy this bundle and try it!