Fine Reves Premium Epoxy Art Resin and Hardener (Crystal Clear, 1 Kg)

I prepared beautiful specimens. Sometime it is very tough to explain some topics/examples because of their non-availability in that area. On the other side, formaldehyde preserved specimens are very different from the original. So idea came into my mind of making specimens, which will not be spoiled. This is making my teaching interesting.Thank you.

This epoxy has low viscosity (is runny) and very long cure times - you need to leave for at least 12-15 hours before it can be touched and further another 12 hours before it starts to harden reasonably. This makes it difficult to work if you’re a regular user. The long cure times make it susceptible to dust etc. Plus point is - gives a good glossy surface. Not worth it unless you’re planning to use it as a top coat only. Colours don’t mix well in this epoxy - you’re forced to use liquid stain.

This epoxy has low viscosity and Super clear there by gives a good glossy surface, however need about 24 hours for completely hardening, I would recommend don't touch it atleast for first 15-16 hrs and further another 10-12 hours before it starts to harden.One drawback i noticed was point of improvement is the hardener bottle got damaged, in transit I believe though the packing was good.

The measurements mentioned does not harden the resin even after 48 hours.

Used a couple of times to make coasters and the last time I used it to give an old table a make over

The epoxy resin has low viscosity which makes automatic bubble release work well.

The clarity it gives after curing is amazing!!It is low-density resin and hardener, so the bubbles also escape easily. (No harm vacuuming either)Go ahead and buy it blindly.check out my works.

Pros1. Crystal Clear2. Cure time is good3. Over all quality of the resin is more than satisfactoryCons1. No free pigments along with the product like some of the others give2. Hot air blower might be needed to remove tiny bubbles