BDK PolyPro Car Seat Covers Full Set in Blue on Black, Front and Rear Split Bench Seat Covers for Cars, Easy to Install Car Seats Cover Set and Accessories for Auto Trucks Van SUV - Blue

These seat covers completely changed the look of my car. The green and black color combination adds a nice pop of color while still looking clean and sporty. The material feels comfortable to sit on, and the covers helped protect my seats from everyday wear, spills, and dirt. Once installed, they stayed in place much better than I expected. Installation took a little time to get everything adjusted, but the instructions were easy to follow, and the finished result was well worth it. They fit nicely and gave my older interior a much more updated appearance. For the price, this full set offers excellent value. If you're looking to protect your seats while giving your vehicle a fresh new look, these seat covers are a great choice!

First off, I did not end up using the clips. I mainly have the trunk down because I am a fur-mom x2 (no 2 legged children); except for the neighborhood kids I take to church on Wednesday and Sunday, then the seats are back up in the sitting position. Back to the clips! Seeing as I have the seats down and pups in the back (American Staffordshire Terrier and Blue nose pit) I didn't want them walking on them, so they don't hurt the paws or snag on the felt interior. Also, the last picture I put a trunk cover down and didn't want that torn. For the non-dog car rider people these clips go at the end of the elastic and it was tough for me to pull the elastic under the crevice of the seat and trunk then stretch and clip. One end is the loop the other is like a tighter L-shape and I would use pliers and close them into each other to fasten more securely. The clips work but not sure how long it will stay and not pup moving the seat from up to down position. Therefore, I secured mine with zip ties! They seem to fix it all just like electrical tape! j/k. The zip ties wont hurt the pups paws; I could give it more slack in the stretch attachments that come on the seat covers and it doesn't feel so tight that it is gonna rip them. To be honest; that was my hardest part. Getting the backseat part on and then making sure they were nice and snug around the back part. Oh, and the front seats have a velcro snap to secure under the seat. Have to go under both sides of seats and feed them through the seat adjuster then velcro it. The part about removing the headrest and cutting small holes to fit the headrest back over and also cut holes for the seatbelt snaps was easy. For the head rest cut a small pinch out about the size of a dime and that is perfect to fit it nicely. The seat belts about the size of a quarter and you can wiggle them through and if it gets too tough just cut a tad bit more and they fit nice. My front seats look a little baggy in the picture because I have arm rest on my seats. I am going to got back and do the same like the headrest. I will remove the arm rest; pull the car seat cover into place taunt and then cut a small hole and put the arm rest back on. I was just getting tired and the rain was coming. Otherwise you could just cut a vertical line long enough to slip around the arm rest bar and down to the bottom of seat but that could be a lot of material cut versus a small size dime hole like the headrest. I also purchased the product for less than the NEW price. I picked the like new for about $13 dollars and they look brand new? I don't know if it was because the box appeared opened then taped back but mine look brand new and had no cuts or tears in them. What a deal! Item arrived quickly packaged nicely with no damage. Again, budget friendly for my fixed income disability budget. Seats are protected from dog hair and a quick spill of a drink if it happens. Got them in my favorite color too! Very pleased; would order again.

Are they an exact fit for my 2018 Chevy traverse? Not really, but close enough. The second row is captains chairs and while it says they'll fit, they won't fit well when there's an arm rest. I really had to fight to adjust them. They also don't stay in place when the seat is folded down to access the 3rd row. The foam piece that is placed between the seat and back comes out every time. While these were only for the 2nd and 3rd row, there was 6 head rest covers. That was unexpected. Was able to cover the driver and front passenger seat headrests as well, so kind of a plus. As for the 3rd row? Lol I got the seat cover on. Mostly. Since it's not really used much and folded down, I didn't bother with the clips. It will not stay in place when folded down without them. I'm not very confident they will stay put or not get really stretched with them on either. As for the back part, I didn't get very far with that. They should've put headrest holes like the captains chairs but they didn't. You have to cut holes for the headrests(if you can get the headrests off. I don't believe mine do. They just fold down) and the seat belt buckles for the seat cover too... They're lightly padded but don't expect them protect your seats from anything other than dust and light dirt. I got the black and grey. The color looks pretty close to advertised, maybe a little lighter. Are they great quality? Not really. They were cheap and will work well enough though.

These fit for a Hyundai Kona '23 pretty well! Be careful when you put on your seats. One of the head rest covers tore slightly when placing on, but I just fixed with some needle and thread. You have to cut holes for the seat belts and the head rests in the back. They're not "perfect" but they are decent enough for universal covers and match the price point in terms of quality. I'm going to continue to use. I found them easier to put on my seats than previous universal seat covers I bought, so it didn't take long to get them in my car. For my Hyundai Kona, the head rest cover for the middle seat in the back - it is quite loose on the head rest but again, for me they work for what's intended : protecting my seats and giving my car a little personality (I got the purple covers)

Bought these for a 2016 Subaru Forester because Amazon allowed the seller to claim they fitted this make and model. It's high time Amazon start clamping down on shysters making claims that products fit certain makes and models of car because, by even the most liberal use of the word, these do not "fit" this make and model. After a couple of hours I was able to MacGyver these into place, but to say they fit is stretching it. (While we're on the subject of stretching it, beware!) Ok, the front and passenger seat covers are straightforward slipovers. They don't really cover the seats adequately (see above picture) but are passable given the price. Be careful when trying to pull the covers into place; some of the seam joins looked as though they might not take much pulling which is why I settled on the above. For the rear seat, ah yes, this is where the fun and games begin! The only way I was able to get this even close to fitting was to remove the seat bed from the chassis. You'll need to release a pair of front seat clips at the lower front edge of the seat bed, and then reach down the back of the seat bed, between the bed and the back, while tilting the seat bed backward to release two metal hooks; there is one on each end of the seat bed. Subaru might have a diagram on their site to illustrate this maneuver. If you haven't done it previously, a helper might make it easier although it can be done alone. Cover the seat bed with the cloth cover and use the small wire hooks on the elastic loops to fasten the cover onto the seat bed. Here is a helpful hint: the first time I did this, I covered the seat bed, joined the hooks and then replaced the seat bed. When replacing the seat bed, several of the hooks came apart and I ended up starting over. So, to avoid this frustrating situation, I used a pair of long-nosed pliers to bend the hooks around each other (see above picture.) I considered using small cable ties which might be a good alternative. Also, be careful when stretching the elastic loops. Some of the stitching holding them on to the cover is very weak; several pulled away (yes, tore off completely!) during this fitting process (see above picture.) Once the seat bed is back in place with the cover attached, I noticed a major design flaw. The seatbelt locks were completely covered and could only be exposed by stretching the rear edge of the seat cover forward, thus exposing the rear edge of the seat (sea above picture.) Slits for the seat belt locks may have prevented this. The rear back was probably the least well "fitting" part of all. What the designers didn't know or take into account was the lower trim of the rear side of the Forester's seat. This severely limits how and where the elastic loops can be poked through. The "fit" was also quite loose for this seat back even after tightening up the mass of entangled elastic loops and hooks that covered the rear side of seat back. The upper edge did not allow for the uprights of the headrests and there was no cover that fit the smaller, center head rest. Overall, the materials and workmanship are poor, the design is poor. Not catastrophically poor -- it's possible to get them to sort of fit -- just poor. Is this justifiably countered with remarks like "What do you expect for $30 on Amazon"?

They were easy to install and they stay in place. I ordered the correct size for my car. The color matches my interior. There was really no padding but I got them for protecting my seats.

Flimsy design for back seat. the padding is not stitched anywhere but along the outer border and rips easily. The purpose was for protecting the upholstery in the back from pets and kids, but it is not suited for more than a couple trips. purchased in February, lasted until July. They are not well designed to form and in the back seat, and you have to cut ugly holes for the seat belts and head rests. the material moves around and is not snug. They are not better looking, but the purpose was for protection. They are not good for that! Only reason for 2 stars is price, relatively cheap cost, and the front covers fit well to form.

They work well. The backseat is a bit difficult tot assemble and haven't got to it yet. I may need a hand to assist in getting it put on. But other than that, they look good. And are very comfortable.

Snyggt, men resårsnoddarna var dåligt sydda släppte lätt från sömmarna.

Let me start off by saying, For the price your paying, it will work well enough. I installed mine on 2009 Tacoma crew cab and if you have one you know what the rear seats are like. The product fit ok on the front, it will do the job. Has the marking for side airbags. Now for the rears, the zipper back to the seats and the minimal cutting you have to do for seat release handles and head rests aren’t that big of a deal unless your a moron. I did have to cut a extra spot for the middle seat belt. The bottom for the rear seat IS NOT 2 pieces, it does fit well, just a pain to flip up both bottom seats for the storage, or you can reinstall the bottom cover every time you open it for storage. The rear back seat cover tie downs are kinda a pain to set up, it’s a goofy ass hook system and once again, if you own a Tacoma you know the rear seat backs have hard covers so nowhere to hook onto. But if you hook them all together or too them selves it holds well enough, although don’t pull to hard because they tear off easily. Like I said before, for the price it’s not a bad product, but it’s a cheap material so expect to replace them. I’d give it a 3.5 out of 5

Highly recommended. Its worth the money. Super satisfied. Easy installation.

These seat covers were extremely simple to fit in my Suzuki Grand Vitara Sport. I was dubious after reading all of the negative reviews, however the instructions were very straightforward and it was not at all difficult to fit the seat covers, so I don't know what people were complaining about. Cutting holes for the seatbelts also was not an issue. I found the straps were sturdy enough unless you put undue pressure on them, and the covers withstand our large dog sitting in the back seat. All in all, very happy with this product for the price.

Se adaptan bien y son resistentes solo hay que amarralas bien