WEUPE Adhesive Transfer Tape, Double Sided Transfer Sheet, 8" x 8" 468MP (5-Pack)

The items arrived damaged. The sheets were creased and pressed into by something heavy that was placed on top. Some corners were peeling as well. I was able to use certain parts of the sheets that were not damaged.The product itself is nice. It's very sticky and you can move it around and reposition it for a minute or two to get the correct placement if you dont press it down hard. But once you press it down hard a give it a few minutes to set, it is extremely hard to remove. It's designed to stick well to metal but I find that it sticks to wood even better. I put a transducer inside of a ukulele without and when I removed it the adhesive remained on the wood and not the metal transducer.

Arrived nicely packaged with no creases or bends. However, the white paper on one side is easy to remove - as expected. However, the brown paper on the other side is really difficult to remove - in a lot of places it actually pulled sticky thing off the glass (I was trying to attach PEI sheet to the mirror glass surface). It created bubbles that I had to poke an remove prior to attaching the PEI sheet.Not a very friendly thing to work with...

Note that what is put on between whatever you're putting together is simply a layer of glue. I was expecting some kind of layer between the glue, (like double sided tape), but there isn't any. Very sticky and can't be removed once applied without ruining the glue. Appears to bond well and strong. Still a good purchase for what I need it for so 4 stars.

This stuff is super sticky. You get one chance to install it correctly or you'll have to peel it off and start over. I found the only reasonable way to remove it is by freezing it for a few minutes then scraping/rolling it off of the surface. If your machine is properly calibrated, this seems like an excellent option to improve bed adheason. It's near impossible to level the bed using the paper method because this stuff sticks to everything. I would recommend gluestick+glass over this for beginners but this does do a fine job if you know what you're doing.

I use it to attach new or reattach old guitar pickguards and it works quite well!

I made custom wooden pick guards for a guitar and used these to adhere them. Wow! Couldn’t ask for more. They won’t come off any time soon

Purchased this to replace PEI sheet on a Prusa i3 mk3 3D printer. This is just the transfer tape, there is no PEI sheet included like I thought there would be. I didn't realize this until after applying it, so I was unable to print anything until a PEI sheet arrived. Most PEI sheets come with tape, so I would recommend buying one of those.Also, the tape arrived damaged. Every sheet was crinkled up and looked like it had been folded. I used the sheet that was the least damaged, but even so it did not adhere evenly to the bed plate. I could not get a good first layer on my 3D prints because it made the PEI sheet on the bed plate uneven. I ended up purchasing a second PEI sheet that came with transfer tape, scraping off this tape and using the tape it came with. That worked much better.

I used this on my am8 3d printer. Is this even an A8 anymore, I've replaced everything except the stepper motors. Anyway my ultrabase was delaminating from the heat bed so I ordered these to reinstall it. Make sure your heatbed is hot before installing and let it cool with weight on the bed and you'll be all set.