Tyger Auto TG-HC3D002B Class 3 Hitch & Cover Kit Fits 2003-2018 Dodge Ram 1500 & 2003-2013 Ram 2500/3500 Factory Style 2 inch Rear Receiver Hitch Tow Towing Trailer Hitch Combo Kit, Black

Great quality Perfectly fitting on Dodge RAM 1500 2015 model Nice shiny high quality coating Easy to fix Fixing instruction included in the box

Very simple to install and 1/3 the price the dealer wanted

My receiver arrived on time and in good condition. Installation was straight forward - took about 30 minutes total - and the instructions were quite clear and understandable. Overall, construction seems to be pretty good, and I had no problems fitting it to my bumper and securing all of the fasteners. The instructions require the large center bolt to be torqued to 250 pounds-feet. Most torque wrenches (for home use) max out at 150 pounds-feet. I torqued mine to approximately 200+ pounds feet and it feels very secure. I would advise getting as close to requirements as possible. One more note - some reviewers have said they were not able to reinstall the round plastic bumper cover cap after installation of the receiver because the center bolt was too high and interfered. I found this to be the case with my installation. For me, a little black paint will address that issue just fine.

I installed this on my 2005 Dodge Ram and it fit like a glove. Installation was pretty easy, a lot of people say snaking the wire for the bolt through the tube is the worst part, but I avoided that and snaked a long zip tie that I had (one that is used for A/C ducts is what I used) first and tied the wire snake that came with the kit with electrical tape onto the zip tie and it went right through. The wire snake that comes with the kit has a coiled end on one side, to thread the bolt and bracket onto, I threaded the coiled part all the way down the bolt (making sure it was good and snug) and dropped the bolt and bracket down the tube (you will look at it and think that this will never work, but it is engineered perfectly and works great.) And the bolt and bracket pulled right though and installed easily. I used a pair of needle nose pliers to grab the end of the bolt when I started to get the bolt though the bracket on the hitch. I didn't want to yank on the wire snake and chance it breaking or coming loose form the bolt and bracket, so the needle nose pliers worked great. The snake that came with my kit was very strong though, I don't think it would have broke. I also left the first bolt they have you install through the top of the bumper loose so I could work the hitch around a little to help get the bolts through. It took me longer to get out my tools and put them away then it did to actually install the hitch.

The final torque is 250 Ftlbs, make sure you have a 12mm hex, I also suggest going for 1/2 or bigger as I snapped the anvil off my 3/8 Adapter.

Easy to install. And works good