IDOGEARMag Pouch Pistol Magazine Pouches 9mm Softshell Adjustable Universal Mag Carrier .40 S&W .45 ACP with Belt&MOLLE Clips

These are knock off of G-Code magazine pouches. I have been using G-Code for 3 years now. I thought I would try these just to review them for a second battle belt that O building. These are not as good as G-Code pouches but they are not bad knock offs. But over all. I would say spend the extra 5 dollars and get the originals. The money you save is next to nothing. And you get a better product and you reward the people who created the product and not those (Chinese) who stole this design. It really is a good knock off though... just sayin’

An obvious rip from the G-code scorpion but it works and I can’t complain.Update: I was able to put these into a black hawk mount. The screws are the same thread!

Great product

But they're actually pretty decent. The magazine pouch itself is great. Solid retention, adjustable, nothing to complain about at all.The mounting system is pretty bad though. I haven't broken one yet, but I'm almost certain I will eventually. The plastic is too brittle. I will either be fabricating my own mounts or searching for a different mounting system i can adapt to them.For those complaining about screws coming loose, use some loctite, that's common sense for anything you don't want coming loose.

Only giving this product a 4 star for now because I haven’t broken into it yet.1. Packaging: 5 stars2. Extra clips for different setups: 5 stars3. Retention: 4 stars- it has great retention but it might just be too much for a battle belt setup. I’ve loosen the bungee enough to where it doesn’t look to loose or risk the mags falling out and it still pull the entire belt when drawing the mag. Maybe it’ll buff out when I use it enough.4. Material: 4 stars- soft shell rubber with plastic on the side and bungee cord- might be prone to scratching or ripping but only time and use will tell.5. Presentation: 5 stars - It looks really nice and tactical

Really wanted to like these because of the price point.Value is great but the materials failed during first use. Shipped with broken molle mount and the belt mount hardware soon followed suit.There is a small brass fitting molded into the back of the holster to fasten the hardware mounts to.Im assuming the brass expands slightly when the screw is fitted, causing it to dislodge from the flexible pvc like holster housing. Over-tightening could also lead to the fastener mount failing and dislodging from the holster housing given that the hard plastic mounts themselves don’t crumble before then.I like all of the mounting options that are included for the value of this holster but they lack any kind of glass fiber reinforcement that you would see in a similar belt/molle mount system with such a small footprint.Retention was great but I'm sure that the likely hood of the fasters failing before the bungee gives way would be the most common fault for this product in particular.What I like about this style of holster is that I can run a few ranger bands to help add some specific pressure when securing extend capacity mags or just to sure up retention on a standard cap mag. No matter how tight you get a bungee style holster, it will always “reset” a bit leading to retention issues.I bough these for use with a standard 17 round capacity Glock mag and they did fit really nicely up until the mounting system failed completely.Its possible I could have just gotten a bad product that snuck through QC, but when it comes to reliability I wouldn't trust this product. If you’re interested in trying a taco holster but don't want to pay double the price these are a good option if you’re willing to chance a design that already has received marks for its unreliable retention.

Then you’ll be pleasantly surprised that this product is a very GOOD knockoff of the branded product. Almost no discernible difference between the two. The outer shell material is a bit different but other than that the form, function, and durability are exactly the same and for a fraction of the cost. If I knew about these before buying my triple mag carrier made from 1000D Cordura then I would have outfitted my entire plate carrier with these instead.

Product arrived on time and upon opening the package I saw that it was well made and looks like it would stand up to a goodly amount of use without failing. The reason I'm putting it away until I have reason to attach it to a backpack or load bearing vest is that it is rather bulky. I initially ordered it for owb use, but it sticks out a good bit and is difficult to conceal. Still the product is well made so I will be keeping it for possible use after the 'zombie apocalypse', when it won't matter if it sticks out a bit further than my other mag pouches

Fits my mag well and feels secure

ハンドガン用のマガジンホルスターはBHIばかり使っていたけど、ゲーム途中で銃を変えたい場合、マガジンの大きさにより調整の必要が有ったが、このホルスターは、ある程度Wスタックの9mmでも.40や.45のWスタックのマガジンでも対応できちゃうのですごく便利です。BHIのクイックディスコネで銃のホルスター構築しているので銃ホルスターを頻繁に変える人にお勧めです。多少緩めになってると思っても落下したことはないです。保持力は素材の関係でかなりいいです。また、ベルト装着を想定してベルト用のホルダーが付属してたり、モールの長さも二種類（一個は装着済み）とネジもきちんとついているのでその点も気に入ってます。またモール装着アダプターの強度が心配だったのですが、軽装サバゲに行くときにBHIのベルトにモールアダプターで直で装着したときにそのままベルト用のアダプターに交換すること無く装備できました。基本はモールパッド付ベルト併用での装着をお勧めしておきます。当方TMC製で到着しております。一点あげるとしたら、幅が有るためモールで並列装着しようとすると窮屈に感じます。それでも出来がいいのと見た目で当方は満点です。

プレートキャリアの前面に装備。モールシステムに対応したキットが付属しているため、そちらに換装して取付けます。まず、サイズ調整がしやすく、大きいマガジン（マルシンのFN5-7,KSC USP matchなど）も余裕で入ります。更に、ホールド力もあるので走っても落ちません。そして、マガジン抜く時も抜きやすい。価格も安価なので手を出しやすいのも良いですね。何の不満もありません。

凄くいい商品ではあるが唯一欠点がある、モールに固定するための部分のクリップが取れやすい(と思う)これがどっかいくとモールに固定出来なくなるので走ると落ちるので無くさない工夫をおすすめする(この前は輪ゴムでぐるぐる巻きにした)、それをいれても星5。ハンドガン系ならほぼ全てのマガジンが入る(と思う、特殊形状を除いて)、別に試した訳ではないが材質がラバーでゴムもしっかりしてる、あのデザートイーグルのマガジンですら余裕で入るししっかりホールドする、しかも小さいCZ75のマガジンもちゃんとホールドする本当にすごい、自分はVector用に購入しましたがこれも余裕、非常にお世話になってます。

ただ、マグ差し込む前は固定具の紐は調節してつかってくださいね無理くり抜き差しは厳禁！抜きづらさと差し込み辛さはありますが、まぁこんなもんでしょー！見た目はいいですよ！