HVLP Spray Gun with Replaceable 1.4mm 1.7mm 2.0mm Nozzles Needle Cap Automotive Air Paint Sprayer Gun Kit with 600cc Capacity Cup for Car Primer,Furniture Surface Spraying,Wall Painting,Base Coatings

Had good results with this spray gun.Sadly, I had to buy a second spray gun in order to get the #25 nozzle. It wasn't a bad purchase. The fact that I could get the nozzle included with the gun for less than the nozzle costs separately was the whole reason for making the purchase. The nozzle, by itself, was more expensive than the sprayer kit which included the nozzle I needed.AMAZING!! I don't know what else to say other than... shop around, there may be a product that comes with what you need at a lower price.

For the price this is perfect. I used it to stain my privacy fence. This is the second one I bought only because I left the first one in cleaner too long.

Cheap guns that you can replace when your employees ruin them

I got this gun because it came with multiple sizes of fluid tips and needles. I am using it to spray auto primer surfacer, which is very viscous and requires a large diameter fluid tip. Very good choice for that purpose. The gun needs to be fully disassembled and cleaned thoroughly before the first use, as there was a moderate amount of metal shavings and packing grease inside the body of the gun.Like others have stated, the factory installed fluid tip is extremely tight and quite difficult to remove. I was able to get it loose without breaking the supplied tool, but the tool was starting to spread out before it finally released. There is no reason for the fluid tip to be installed so tight!

Tip will not come off for the life of me. I had a vise and a pipe wrench on it and it managed to snap the housing instead of coming out. I also tried heat. They must have all but welded this thing together. Total garbage.

I purchased to spray a couple of cabinets I made. I needed something with the 2.0 tip in order to spray the paint I was using. I still had to reduce the paint a tiny bit but the gun sprayed flawlessly. The end result is great and I am more than pleased with it. The gun did not clog once. Will definitely use for future projects.

This can replace cans and cans of spray paint.It works great for painting anything! I put thinned acrylic paint and paint set pieces.I love it.My compressor has a difficult time keeping up but this thing is worth it!

I already own two guns that are very similar, but they are 1,300 miles from here. Tip was installed with a hammer torque at the factory--extremely hard to remove and change to one of the other tips. The supplied tool is a joke. Be aware the tips, needle and atomization are a matched set--do not mix them up! Very too small o-ring in the package--it gets stretched over the fluid nozzle, if it doesn't break. No tool supplied for the fluid nozzle joint--necessary to properly clean out residual paint. Thankful that I am very familiar with this style gun and have used one for over 15 years.