ULANZI F38 Camera Quick Release Plate w 1/4" to 3/8" Screw Thread, Quick Release System QR Plate Camera Tripod Mount Adapter for Sony Canon Monopod DSLR Stabilizer Slider DJI Switch Between Stablizer

This Ulanzi camera quick release plate is a great addition to my camera setup. The build quality is impressive—solid metal construction that feels durable and secure. Once mounted, there’s no wobble at all, even with a heavier mirrorless camera and lens. The quick release mechanism works smoothly and locks in place with confidence. It makes switching between tripod, handheld, and other supports fast and hassle-free, which is a big plus when shooting. I also like the low-profile design. It doesn’t add extra bulk and doesn’t block the battery compartment or ports, which shows good attention to detail. Installation was simple and took just a few minutes. Overall, this is a well-made, reliable quick release plate that does exactly what it’s supposed to do. Great value for the price and something I’d definitely recommend to photographers and videographers.

Its very good, easier to release, stronger. I think is a good price for what you can perform better.

I absolutely love how robust, secure, but most importantly QUICK this system is. Having one of these receiver plates screwed into my camera shoulder straps quarter inch quick release, and a plate on the bottom of my camera, means i can transition between hand held, on my sling, or on my ulanzi tripod with the click of a button. No screwing, no fiddling with carabiners, or trying to unclip a bunch of dangling strap mounts. I can't see myself using any other system. The f38 system is bordering on perfect for my use, and is totally worth building your setup around.

Work really well

Bought this so my cameras and monopod could all be switched quickly. I love the Ulanzi quick-release mounts and have them on all my cameras and my monopod. They hold my cameras securely, and the lock makes sure I don't bump them by accident. Well worth the money.

Three things to get out of the way before I get into my review: (1) The instructions are on the back of a paper sleeve that goes around the plastic case. Instructions *are* in both Chinese and English (though they're only a slight cut above Ikea-style wordless instructions). (2) The instructions omit the release button lock/unlock process: Pull out on the release button (it's spring-loaded), then a twist either way--small icons for locked (locked padlock) and unlocked (unlocked padlock) on the clamp body and an index line on the button show which position the button is in. You could leave it unlocked for convenience, but then you'd risk accidentally bumping the button and inadvertently releasing the equipment that's attached to the F38 mount plate. (3) The F38 mount plate works with my ARCA-compatible clamp mounts, but the F38 clamp mount will work ONLY with the F38 mount plate, as the quick-release system (the button) adds a sliding metal locking tab that's not ARCA-standard (it requires an extra cutout on the edge of the mount plate). Now for my thoughts on reasonable uses for this QR system: To start, I'd never put the F38 mount plate on one of my cameras, as the footprint is just too small be secure enough for anything that weighs more than a pound or has a long-ish lens, IMO. I *can* see, however, how a compact QR system like the F38 will be useful for some of my small accessories (phone tripod mount, Lume Cube, etc.) that I typically use with small or specialized mounts (e.g., my lightweight monopod, flexible-leg lightweight tripod, suction mount, and clamp mount--all shown in the photo), as it would allow me to easily swap specialty mounts on small accessories, while retaining the ability to mount those accessories on larger, ARCA-mount-equipped tripods (when needed). This will save me from having to move my one spare ARCA-mount clamp around to the monopod/tripod/mounts in order to attach my phone mount (it has a built-in ARCA base), let alone from having to screw in 1/4" mount screws into my Lume Cube (or to attach a bulkier ARCA mount plate to the the Lume Cube). For example, in the photo I've got the F38 mount plate on my phone tripod mount, with the F38 mount clamp on my lightweight monopod (or heavyweight selfie stick, if you prefer). My future intent is to get more of these F38 combos when they go on sale (<$27 in 2023), so that I can permanently have F38 mount clamps on the specialty mounts shown in the photo--my flexible-leg lightweight tripod, suction mount, and clamp mount (yes, that will require a GoPro-to-1/4" adapter). I'd also put an F38 mount plate on my Lume Cube (also in the photo). That would give me 4 different specialty device mounts that I could use with the phone mount or Lume Cube that would require only a quick button twist/press to swap around. If I want to attach either the phone mount or the Lume Cube to my ARCA-equipped big tripod, I'd be ready for that, too (and yes, I've done that with the phone mount). As I think about this more, additional uses of the extra F38 mount plates that I would have may occur to me. Pros: * The F38 is smaller and lighter than a comparably-sized ARCA mount combo. * The one-button release mechanism is more compact and works faster (and may be more secure, in some ways) than a twist-knob clamping system on a comparably-sized ARCA mount combo. I have two of the latter, but they're definitely less convenient to work with and more bulky to pack than the F38 mount. Cons: * Probably not stable enough to use with even smaller mirrorless cameras, and definitely not DSLRs. * The 1/4" screw on the mount plate doesn't have a flip-up tab, and after-market screws with tabs have too thick of a top for this plate, so you'll need to use a screwdriver to attach the provided 1/4" screw to your device. At least the mount plate is ARCA-compatible, so you'll not need to remove and reattach the mount plate much, if ever. * For an accessories-based niche use, it may not bring sufficient value to a casual photographer.

I bought four of the F38 pro version to make gear transitions more seamless when I film weddings. They work well and are secure. I like the button locking design. I will say I had to return one of the four because the pin was not properly machined, and the plate would get stuck sliding into the mounting plate. The replacement was fine, though. The base of the mount plate is arca swiss, but the plate that slides into the quick release is not. Some other purchasers got confused on this point. That means you can put the quick release mount into another mount that accepts arca swiss, but the F38 plate itself will need to slide into the top of the F38 quick release plate. Another tip: Loctite blue thread locker works well if you need to mount a plate on something in a semi-permanent way. It's not really permanent like red thread locker, but cleaning the blue off of threads is a pain.

Simple, clever design and solid Construction. Another superb Ulanzi product.

Qualidade ótima de material

Leider retourniert – das ULANZI F38 Schnellwechselplatten-Set machte einen soliden Eindruck, passte aber leider nicht zu meinem vorhandenen System. Verarbeitung top, Kompatibilität leider nicht gegeben.

I love all of Falcam's products so far, own about 5 adapters + strap attachments now. This one is a little tight, but my other multi-hole quick release is as well. Bit annoying, but still useable. Please note that *this* multi-hole quick release does NOT have strap holes, as opposed to the other one I have. Keep that in mind.

Fantastic product.!

As described and arrived very quickly. I have several of the F38 quick release plate kits and they are awesome.