SPEEDWOW Oil Catch Can Tank Micron Bronze Baffled Filter With Hose Kit Universal Blue

It is quality made

منتج جيد ويصل بسرعه انصح به 👍🏻

The oil catch can is a great addition to your engine to extend its lifespan. Installation is not plug and play but doable. I had to manufacture a bracket to hold the can under the hood. Use the longer tubes to connect to the manifold to let hot gases to cool down so the catch can could actually catch anythin

I installed this oil separator on my LT4 C4 Corvette. The engine has been modified (big cam, porting, headers) and although the engine does not smoke or use any oil I figured it can't hurt to prevent oil from entering the intake manifold when I run it hard. The Speedwow oil separator is built well and came with everything I needed to install it in my engine compartment as well as plumb it into my PCV system. I really only had to drill two holes in the mounting bracket, cut the top of the bracket to make it shorter and find a nut, washer and bolt to secure the can to an existing hole in the radiator shroud. The kit had plenty of 3/8" hose for my installation, it came with two clamps, the aluminum bracket, two sets of different sized aluminum fittings, Teflon tape, 4 O-rings two for the aluminum fittings and two spares, and a larger spare O-rings for the can body. The dipstick makes checking the oil level in the can convenient. I like the small size and the anodized black finish.I would definitely recommend this oil separator.

Nice quality for the price and very fast shipping to Australia. Comes with smaller sized hose and I'd reccomend swapping the in/out ports as the brass filter is on the in port. Compact size makes it easy to fit but still decent reservoir.

I added 2 Speedwow oil catch cans to my 22 Ford Maverick 2.0 Ecoboost GDI.Are they needed?Nope, the engine will run fine without them. For how long? is the question.After purchasing a couple of Evil Energy oil catch cans (they performed really well too) I decided I wanted the benefit of the bronze filter for the air leaving the can that the Speedwow brand has to offer.You may have noticed in one of the pictures that I modified mine. I did this because I felt without the separation between the in and the out a good portion of the air would be pulled right back out prior to hitting the baffle. This simple modification creates a divide to force the air through the baffle. I also liked the additional surface area for the oil vapor to condensate on from the Evil Energy catch cans.Now I’m pretty sure Speedwow annd Evil Energy are both manufactured by the same company and just machined and labeled differently. So I took the best of both worlds and the results are exactly what I expected.The last image is just after one week of driving.They do their job and keep the blow by particulates that go from the crankcase via the PCV system and entering the intake manifold. The less of this hitting and getting baked on the valves the better for the longevity of my engine.The price was right and installation was very easy.

أفضل كاتش كان يفلتر بخار الزيت ويمنع وصوله للمحرك

The materials, design, and construction of the unit itself are all top-notch. It will depend on the car you are working on, but the install was pretty straightforward for me. Don't expect too much from the instructions, but if you are installing this, you probably have a pretty good idea what you need to do.However, the installation kit could benefit from a couple minor updates that would definitely put it in 5-star territory.First, the aluminum bracket. If the spaced holes ran the whole length of the bracket, that would make this a more useful piece. And it would be nice if it was a little more "bendy". It's basically holding the weight of a soda can and does not need to be as beefy as it is. I made my own in about five minutes, and it worked perfectly.The hose that comes with the kit is nice, but it is a pretty loose fit on the inlet and outlet nipples, and the included clamps are not up to the task of synching them tight (both stripped out when cranked down).In no way do I want to discourage you from purchasing this item, the unit itself is fantastic. Just go to the hardware store before you tear your car apart and invest in some good quality hose clamps and maybe a piece of softer aluminum stock to make your bracket out of.Nice extras: the little dipstick is a handy feature, and it comes with a near-lifetime supply of teflon tape.Recommended.