MAGNUM RTS73TY RT Step for Toyota Tundra Double Cab

Fit is great. They are rugged and look great. I suggest installing the brackets to the rails and don't tighten them up. Lift the bars up and install 1 bolt in the back then one in the front and then the other brackets. Then go back and tighten the brackets to the rails. I did it by myself so it's not too hard. You will need a 12mm and 13mm socket and boxed end wrench and an extension. The 12mm is to remove the factory bolts prior to installing the rails.

I looked around for a few weeks for steps to fit my 17 toyota tundra (double cab) I know the description does not specify fittment for a 2017 tundra but I called the manufacturer and they were very helpful. I didnt post pictures because a 16 tundra is already pictured in another review.. the steps fit great and they look fantastic. Most after-market steps are tubular and quite boring-looking. These are very good looking and enhance the trucks appeareance by a long shot.Installation... well, have a buddy help you. You CAN do it alone but it took me 3 hours and a whole lot of work. Im sure that if you have the few tools you need (socket werench and attachments) you can do this with a buddy in an hour. If you are go into tackle this by yourself, have patience, you are going to get some bloody knuckles and it will take some ingenuity to hold it in place while you bolt it on. I used a tool box, balanced each step on it in place and painstakingly slowly bolted it on. The instructions are not the greatest, however, save yourself headaches by searching for this item's installation on youtube.I would have rated it 5 stars ( and I have no complaints about how it looks or functions) but the instructions were pretty bad out of the box and there was some shipping damage to the end of one of the steps as well as the hardware scattered all over inside. Since the steps do not ship from amazon, this is a manufacture isssue. With this being said.. great customer service from the seller.

I researched for a while and ran across these steps for my truck, I wanted something that gave it a unique look without having to be round or oval like 99% of other steps. They took a while to ship due to them being made to order which I am ok with a business doing that since it keeps their costs down thus keeping consumers cost down.The material is very tough and overly supported steel which should keep it lasting a long time.The build quality , I would say is a 4.0 out of 5.0, mainly due to my own meticulous nature and these not being made on an assembly line but hand welded in a jig. There are a few areas that things aren't perfectly square but would only be noticeable my me.The powder coating seems to be good and durable but I know the underside will eventually chip due to the nature of driving. As this occurs I will just use some black touch up paint to keep any exposed metal from rusting. If in the future it begins to happen on the more visible surfaces, I would just remove them and have some bedliner material sprayed on them. I cant expect powder coating or any kind of finish on products this close to the ground on a vehicle to last forever.The installation would be easy to moderate depending on if you use one or two people. The brackets mount to the factory holes without issue, you may have to scrape a little bit of undercoating in a few spots for them to sit flush. You will need both a ratchet/socket as well as an open end/box wrench to keep things from spinning when tightening down. Keep all bolts loose until you have the steps where you want them and hold the steps in place while you or a buddy tighten the attachment points to a tightness that they wont move. You can go back around later and torque everything to spec once you like the placement.Overall i am completely satisfied and would buy them again.Attached is a picture of them on my double cab

I wanted a step that was functional and stylish and these fit the bill. They look very aggressive and my 2015 Tundra Double Cable looks different than all the other ones out there with tubular steps. No attention to detail was missed, from the packaging, to the welds, to the powder coat finish. Everything was top notch and delivered in two days. I didn't have much of a problem following the instructions but they could be written a little better. Just take your time and read them over with the parts in front of you to follow along. The instructions state to mount the brackets to the truck first, then the step. If I had to do it over again I would mount the brackets to the steps then the whole assembly to the truck. It's kind of a pain in the ass to put the bolts thru the holes and then add the washers, lock washers and nuts while on your back. I'd highly recommend these.

Love the steps I bought these because they are unique(i haven't seen anyone with them in my area) and my wife is pregnant and needed them to get in my truck (-; they were vary easy to install pretty straight forward instructions. Remember your going to need a ratcheting torque wrench to torque these bad boys down. Vary sturdy and a vary nice finish.. Anouther reminder is to tighten the the bolts the hold the step plates down as most of them were lose upon arrival..

They work great. I’ve only seen one other truck with them which makes me happy. I personally like the small, single steps over the full rail along the cab. Well designed. The hardware however is cheap AF. It’s so cheap I don’t think China would carry it. I barely torqued em down and broke a bolt. It shouldn’t be so easy to break a bolt that size by hand.

They look great and have a really good fit. Mine started rusting after 3 months and less than 2,000 miles.