POWERTEC 71181 Drawer Front Installation Clamps | Cabinet Hardware Jig | Drawer Jig for Easy and Fast Drawer Front Panel Installation

Bit fiddly to set up and don’t really hold the face, I gave up and did it without them

The clamps work pretty much exactly as expected. They are easy to attach to the drawer box, and the front clamps allowed me to hold the drawer face on while I got it aligned just right. My left-hand clamp wasn't quite as square as the right-hand one, but it didn't really affect the install process. I didn't find the left-and-right adjustment screws super useful, but if I was dealing with more accurately assembled boxes & faces, I could see how they could save a lot of time on repeated alignments. I did have an occasional drawer face get misaligned, but it turned out I was pushing too hard on the face and causing it to shift the drawer slides out of alignment. Once I removed my spacer shims and screwed on the face, it bounced back. So a recommendation here is to make sure you always loosen the front clamps before making even small adjustments.

Worked the same as some of the more expensive name brands. Holds the "false" front of the drawer tightly enough to stay in place but with enough adjustment (while holding) to position the front perfectly. If you give yourself enough clearance between the drawer side and the underside of the opening, you can then close the drawer almost completely to help with alignment (you need 5 mm or more clearance).

Funktioniert, Leider kann man sie nur gut einsetzen wenn es sich um Einzelschränke handelt. Wenn rechts oder links daneben eine zweite Reihe Schubläden ist, dann sind die Bügel so breit, dass man die andere Reihe Schubläden entfernen muss. Dies ist eigentlich nicht schlimm. Sollen aber die Fronten, der Schubläden daneben mit den gerade zu montierenden Fronten in einer Flucht sein, so kann man dies nicht gewährleisten, da diese ja dann ausgebaut sind. Sonst aber gutes Produkt.

Es útil y práctico 😉

This is the extra hand you were looking for that can hold the face of the drawer while you set up your spacing. Especially convenient if you have to install the drawer fronts before the handles.