Brake Bleeder Hose- One Way Check Valve Tube Bleeding Tool Kit for Motorcycle Clutch

I know this says for motorcycles, but it worked great on my car. Used it with my 2006 Volvo XC 70, and the performance was flawless. Made the brake fluid flush easy.

Used works great for brake fluid change. I’m happy

First use was for a motorcycle clutch master cylinder after rebuild so there was air in the line. There is a strong spring for the check valve as it was not going to allow the weak pressure from pumping the clutch lever with air in the line to allow flow. Under these conditions you will need a strong vacuum pump or as I did a means of forcing fluid through the system. I used a syringe designed for reverse bleeding, which by the way doesn't work for that. The hose will blow off the syringe or nipple.Back to topic. I found I could use the syringe to force fluid through the master cylinder plunger intake and out the check valve. It required considerable effort and their was interference from the fairing but I could do this alone.I did try and returned an air driven eductor as it was woefully inadequate. Do bother with those.Recommended but you will need the above methods if there is air in the system. Pumping the lever in my case isn't going to get you there. Auto brakes? Unknown. Don't see why it shouldn't last for years.

I saw this while looking for needed brake parts. I also wanted to flush the brake fluid. This one way valve made the job fast and easy, now I one person job.

This thing works just like it's supposed to. Yeah really. Something from Amazon that works as advertised! I had low expectations (i didnt think it would work at all) but it worked perfectly for flushing clutch fluid. Haven't used it on brakes yet but it's exactly the same thing so it should work fine for that too. Very surprised!

Hasn't died on me yet. Nice useful thing to have brakes. The provided clamps are also great but a little hard to pinch just with your fingers (this is a good thing). Time saver, worth it 100%.

I have used a lot of different break bleeder kits and by far my favorite. As long as you put a little grease at the base of the bleeder screws to keep air from getting sucked in and lift the hoes from the bleeder and into a container your golden.

Great product, it makes flushing the break fluid a very effective and easy process without any other person’s help.