Heavy Duty Replacement Ball Joints for 07-18 Jeep Wrangler - 10626

These fit good in my Jeep JK. They fit tight like most aftermarket ball joints because they add knurled teeth for cutting staying into the knuckle which is probably good if you have the huge tires and a lift kit. But they do go in fine with a little coaching and a pull handle on the ball joint press. Don't forget the Jeep adapters the standard press kit doesn't have. Side note-Bottom joint grease fitting fit fine as I turned it towards the back slightly inward and then ground down just a hair of the knuckle so the grease gun fitting could get onto it. Doing all this before knuckle installation is best.

Very well built and Heavy Duty. Got these after I got some pretty bad wobble after upsizing my tired to 38’s. My Jeep is a 2012 Wrangler JK 4 Door and these INSTANTLY made my ride feel sooo much better. Smoother ride on the road, less vibrations in my steering wheel, and better steering response. Unfortunately I pretty much replaced every suspension part before these and non really helped and turns out it was my ball joints. They passed the “tests” you can do but it was obvious they weren’t any good. Ultimately very happy

Works great

Had them in about 2 months now. After I had them installed I noticed one of the boots had a split. Contacted RC to see about new boot and they sent me a whole new set! Top notch customer service!

Bought these thinking they had enough good reviews and the price was decent. Unfortunately I’m paying for it now because after only 8000 miles they are bad and have side play. Should have bought a higher quality set because it would have been cheaper then doing the job twice plus an alignment. Called Rough Country and was questioned on my maintenance. (These are greasable) Yes I greased them on both oil changes because that’s all they lasted. Poor quality and poor customer service.

Good price

Great quality crazy hard to install

Old ball joints shot, tough to remove. Always had good luck with Rough Country, the ball joints install was fine for jeep jk. I did not grind out the steering knuckle for lower ball joint grease fitting, instead use the Midland 36-144 extended fitting from Amazon. Only 1000 miles but all is well.

La calidad se ve y siente muy bien, el material del cobrepolvo de excelente calidad, hay que recorrer algunos kilometros después de instalada para que asiente la rotula (es normal) La instalación es sencilla solo si tienes la herramienta adecuada (prensa Para rotulas y los insertos adecuados) Ojo: la rotula superior viene con movimiento telescópico, en otra plataforma ví que alguien reclamo esto, pero es así como debe de venir dicha rotula " no es que esté dañada" Tuve contacto con proveedor y respondió amablemente y te respaldará si algo no es adecuado Gracias

Damaged products received

Look to be good quality had severe death wobble replaced several other items to rectify as soon as I had these installed problems solved

***Update: getting close to having them on for 2 years, they are still super tight with no play or signs of wear been greasing them every 1-3 month without any issues*** Came in within few days. Opened package n everything seemed perfect. All ball joints are new n super tight. I would like to mention 2 of them will be telescopic. They are what you call the "slider design" so they won't have play left n right but 2 will be able to move up n down. There are videos on this design online. Installing them this weekend and will keep you updated. So far I'm impressed and have high hopes ( just need to pump them full of grease before installing and make sure they are installed properly so every month I can ensure they are re greased. Also they have 500 mile break in period. Will update in a few month to a year

Great