Galaxy Note 10 Plus Screen Protector, [Dome Glass] Full 3D Curved Edge Tempered Glass Shield [Liquid Dispersion Tech] Easy Install Kit for Samsung Galaxy Note 10+ - Two Pack

The included instructions aren't explicit enough, comes with both old version and new version, make sure you read the newer version, but even with the newer version, so here it goes. In order of importance, descending order:When you're about to pour the adhesive, make sure you have the vial pushed into the bridge all-the way in! Otherwise you won't get the desired one-inch circle when it comes-out!If a drop of adhesive splashes away from the main bubble, slowly move the main bubble to absorb it and bring it back.When you're setting the screen protector, make sure you set it diagonally with the bottom touching the bottom edge of the phone's screen while the top rests on the thing above the top of the phone's screen! Careful! Make sure it's aligned because the screen protector is sticky!I found my guest bathroom's granite table to be the best surface! And it also has better lighting!Use a level to find the most level surface in your house that has a nearby outlet! Don't rely on a level app!The outlet adaptor for the UV light isn't included so you'll have to use an iPad charging brick or something with more than 2-amps that connects to USB-A. Otherwise, cure times should be doubled.I recommend buying directly from their website instead www.WhiteStoneDome.com Because if you buy directly from their website, you'll be able to easily register for free the limited lifetime warranty. I don't know what it covers but all i know is the website is tad more expensive but also more rewarding.When i first ordered this it arrived damaged so i had Amazon send me a free replacement and it arrived in 2-days at my nearby Amazon Locker.

Hold your breathe, watch installation videos at least twice, then don't screw up

I followed their video carefully and precisely and it worked fine with one fairly major caveat, the screen protector is just barely large enough, if not even a little small in length from top to bottom in portrait mode. It went on misaligned by a small margin off the top and over on the bottom. Once you've done that initial 15 second cure there is no re-aligning it so I will have to live with it as is I guess. Well, it is going to bubble up like crazy in my case at the bottom so I am trying a second install.Worse yet the instructions are not clear about using the provided black tape to protect the phone, what part of the "sides" are you suppose to protect? Also, I got the kit with two screen protectors but they do NOT provide additional wipes, dust remover stickers. absorption strips or protective tapes etc. to perform a second installation. Oh, and if you are going to try a second installation reusing the "absorption strips" is a total nightmare, they are soaked in adhesive and add a ton of lint on the edges of the screen once used.Second attempt things went much worse. The threads on the adhesive tubes are a joke, hard to get caps off and harder to screw onto guide. Also, not enough adhesive in the tube and you can NOT tell this until it is too late. I wasn't able to get the edges to be fully adhered, had many bubbles appear and had to abort, wasting ridiculous amounts of time in the process. Worst yet I got a small dollop of adhesive on my wife's wooden desk and this stuff will NOT come off and pretty mush ruined the finish on the desk top.A good idea ruined by a horrible execution!! NOT WORTH THE EFFORT AND RISK!

3rd one I've had on the same exact phone.First one was good and no issues, protected my phone until it randomly cracked like it had hit the ground.Second one was good, until one of the corners started randomly separating. Tried to redo the protector but it cracked.This one I used a little of the second bottle as well, and it seemed to work good... But then after curing, a few very small bubbles appeared in a few spots on the screen, and it started separating from the same side for no reason, this time worse than before.

This is hands down the best screen protector I've ever used on any phone I've ever owned. The only drawback to this is the price. But you get what you pay for. Also, read the instructions or watch a tutorial video very carefully. If you only get a single pack, you get one chance. There's quite a few steps in this installation but you'll get it down pretty easy. The last time I installed it the screen protector sat too low and the bottom corner caught on my case and caused a huge bubble. So I just got a two pack and it worked perfectly this time. Fingerprints are nearly non-existent for like at least a year on these. They're so smooth and thin you can hardly tell it's there. Highly recommend!!

So I received the kit which as I opened it looked like good quality, I attempted to put the first 2 on the first one after following all the instructions started pulling off immediately after curing it according to the instructions so I tried the second one, same thing happened. I requested a replacement and got it today and upon opening the already torn box noticed the screen protector with the backing tape still on it was shattered. Now I was assuming it might have been the shipping company that did this but the packaging was badly torn like it was a return some other customer had made and they just decided to leave the broken item inside with it and ship it off to people requesting replacements. Seems like a good product ruined by customer service.

Overall happy with this product however one of the 2 screens arrived broken in the box. I have no wat to contact seller to replace only one screen and did not want to wait to replace the whole package) I installed the glass that was intact. I was carful to follow the instructions exactly however I found I ended up with tinny bubbles honestly they are very hard to notice but they are there. the glass looks and feel great on the phone I tried several peel and stick and they were all total garbage the uv is the only way to go with the note 10 plus because of the screen curve. The finger print reader is 90% I turned up my sensitivity and made sure no tinny bubbles on reader area I'm happy it is 90% had the product arrived with 2 unbroken screens id have given this a 4.6 out of 5 as the tinny bubbles were the only other drawback. I would take pictures of the tinny bubbles but they are tinny like needle head size I did not see them till after the screen was cured.

Not an easy process but if you follow directions or view a YouTube vid tutorial isn't that hard to install, i had the plastic protector from factory since 2 years or almost and i had that dome glass on my s9+ for so long and it has past 4 years mark without problems and still been in use. i was scared with mixed reviews and decided to give it a try loving it ao far and fit with my ringkie x-fusion case so im happy I'll update later on after a while see how this one gonna do.

My first white dome broke because I threw my earbuds case a good 10 feet away to my bed and it landed right on the corner of my phone screen. The Screen protector broke but my phone screen was safe so it did it's job. So I bought a new set. As long as you follow a guide to the T you should be good for the installation. I had to reregister my fingerprint just to be sure that it is working properly but no problems have risen since then.

A+ thanks Whitestone