Front Seat Jackers® - Made in USA, Seat Riser, Seat Spacer, DDI Original Design, Solid Aluminum, Factory Grade or Better Hardware, Compatible with Toyota Tacoma, 4Runner, FJ, and Lexus GX

Really changes seat position and comfort. I installed on my 2018 Tacoma and worked perfectly. Make sure to remove white factory inserts so peg will fit. Much easier to install when back seat bolts are out and seat is shifted back out of the way.

7 years wasted driving uncomfortably. I had no idea these existed until recently when a mechanic buddy of mine informed me. I’m 6’3” and any drive over 1 hour in my Tacoma would leave my legs numb and in pain. However, after installing these seat jackers, I can tell I’ll be comfortable for longer trips. This brand is extremely well made. The jackers are solid, with perfectly sized screw holes and well machined. No headache installing, just undo the front 2 bolts, lean the seat back and install. Bonus: the seat jackers have machined screw holes on the front so if any of you guys are like me and like moelle panels in the bed, ceiling and under your seat, these seat jackers have machined screw holes to keep your mounts. Extremely impressed with the forethought (I was worried I’d have to drill these holes or find a new way to install). I see “value for money” listed as a negative on here. Ask yourself, would you trust some cheaper brand? This part connects your seat to the frame so do not cheap out. For the value, this is not bad at all. I can not recommend enough. Do yourself the favor and purchased these, especially if you’re tall.

Install was easy and fast. The first time I sat in the seat after install I could instantly feel the vastly improved position and comfort on my lower back. I spend a great deal of time driving from job site to job site and my back has paid the price. Highly recommend

I’m 6’1”, 220lbs, and have neuralgia in my neck and legs, and back pain from an injury. I replaced my 2008 4Runner with a 2023, and though I love it; the factory angle on the seats left me feeling like I was sliding forward and had to prop myself up with my feet. With these I’m more reclined, less pressure on my feet and legs. That makes me less tense when I drive and way more comfortable and relaxed. At the lowest range, the front of the seat sits higher than it did fully lifted without the jackers. It has a slight recline towards the back of the seat; making it infinitely more comfortable to sit in. The clearance between the steering wheel and seat is a little tight, but not ridiculous, and only a concern when entering and exiting the vehicle. They are expensive. But they are big, solid, well machined, powder coated, and use the factory mounts and guidepin. Not even comparable to the stackable washer option. Don’t waste $20-30 on those. If you have the budget; these stackers are where it’s at.

These are easy to install, and they will actually make 4Runner seats comfortable. They are extremely well-made. One piece of advice: put the loctite on the bolts a day or two before installing them in the car.

Twice the price of the china knock off and I have both and they are both equally effective. I ordered these because I was in a pinch and needed them “now”. I don’t mind supporting USA but the price needs to come down a bit.

I purchased a 23 Lexus Gx460 a couple of months ago and love it! However, over the last couple of weeks, I have noticed that the seating position leaves a lot to be desired. The IROC-Z stance does not give much support underneath my legs. I am 6ft 2, 200 lbs and deal with chronic back issues. After reading many reviews online, I decided to give the Seat Jackers a try. Installation took maybe 10 minutes, the online instructions were excellent. I was a bit skeptical of spending $100 but after testing it out, the seating position is now perfect. My legs are well supported and I actually fell like I'm sitting in the seat, not sitting on top. The Seat Jackers are very high quality and I feel worth the extra money over the copies. Well done!

Hemmed & hawed over these (and similar knock-offs) for years. Balked and held off because of the ridiculous price for 2 pieces of milled aluminum. Still, if you want what they have, you either pay or go without, and, like they say: "Buy once, cry once." Yes, this is stupidly over-priced. It would be fine if it were for BOTH seats, but... it is what it is. And seeing as how 75% of my driving is solo anyhow, I just knuckled under and got the pair. There are NO INSTRUCTIONS (at least my set didn't come with them), so it might take some folks a bit to figure it out. Mine went in without a hitch - maybe 10 mins, tops, to install. It took some getting used to for the slightly different angle, but the additional room for my legs was a MAJOR comfort improvement. (And I'm not even that tall!) Fit & finish were first rate - no tweaking or fudging to get them in position. Included hardware worked as it should; (I added a drop of blue loc-tite to all bolts, to make sure they wouldn't work loose over time). (I suppose If my wife grumbles enough, I will spring for a set for her side, but she's much shorter than me, so I doubt she will.) Overall, quite satisfied.

Being 6'1 driving a 2015 tacoma the seat jackers really made my sitting better. If you feel like you need them just buy them, you wont regret it! They seem expensive but seeing the build quality and that its litteraly holding your seat to your truck you dont want to cheap out. I think its right to get these instead of ''knock-offs'' for $30.

Personally I like the way this product makes my sitting more comfortable

Don’t wait if you’ve ever considered these. Amazing and comfortable and just what your Tacoma needs. Very pleased with these and were in fact pretty straightforward to install.

Fits right

This tilts the seat back to a more natural position.