Kensington3.74-Inch Universal Car Mount for Mobile Phone

This sturdy little device is hard to fault. It's a tad more expensive than some of its competitors, but once the package is open the quality and simplicity of its design are apparent straight away.DO read the (largely pictorial) instructions first! Unless your car's facia shelf is very narrow or you're mounting it fairly high up the screen, you may have to pre-shape the stem before fitting it. Be prepared to use strong fingers, as it's surprisingly rigid (that's a good quality once it's in place!).Once the suction pad is applied to a clean screen it sticks very securely and remains firm in all road conditions.The phone support element is much lighter, but no less well-made. The padded sliding clamps hold the phone firmly, without blocking access to either the power socket or the main side switches.Once you're familiar with the release button at the back, loading and unloading your phone is delightfully simple.Considering the length of the supporting stem, some oscillation becomes inevitable when driving on uneven roads, but this separation from the screen may actually serve to protect your phone from the full impact of the worst vibrations.My verdict: very well made and definitely worth the money.

This is, by far, the most solid and stable windscreen mount I've ever used or seen. The suction cup is incredible. Once attached, I won't fall off your windscreen.The sturdy but flexible arm is very long, so suits new cars with large dashboards well. Once you've bent the arm into position to suit your car, it won't move whilst driving.The mount itself is designed well and will hold most phones. Dare I say, any phone? It holds my iPhone 6 plus!I've bought 4 of these now. One for me, and 3 for friends and family who have liked it when they've seen it.It has served me well with my iPhone 3G, iPhone 4, iPhone 5, iPhone 5c and now my iPhone 6 plus.Please note, I am using the official Apple leather case on my 6 plus, and it just fits comfortably in the mount at it's widest setting. I fear that it wouldn't fit if I were using a bigger case.If you're looking for a good, sturdy windscreen mount that you don't have to replace every year, get this.

yep...looked at loads on Amazon basically all the same BUT, read the reviews and I thought give this a go!. Glad I did, yes it does bounce about a bit what wouldn't on uk crap roads but it holds the fone very well and it STICKS LIKE S**T to the windscreen. I might add a pad to stop it, rest it on dash perhaps. Yea for under a tenner you can't go wrong with this, it really is well made and the bendy arm thing is very strong, once in the desired position it is staying there!! A novel aspect is the quick release button on back, press it and the arms slide out and bingo fone is good to go!! - buying another NOW!

Updated:Had to buy a second because the clamp mechanism stop working. I had fiddled bit with it so probably my fault. Having said that, I now have two goosenecks and two vent mounts which is a bit wasteful. Shame you can't (or can you?) buy only the bits you need.Earlier I had said the air vent mount is excellent. Moderated my view a bit because in my car (at the time a Golf), after using it for a while found that the weight of the phone cause some vanes on vent to split so gave up on it. However it is adaptable it should fit any vent (unless the car designers have been particularly radical). Once fitted it can be removed (the 'legs' rotate to allow them to be unlatched). Sufficiently stable not to adversely impact driving apps that monitor your driving. If you do like a lot of hot air coming from the vents then perhaps the gooseneck is your best bet. Like others of its ilk, the suction cup requires a nice clean surface but once stuck is fairly rigid owing to the solid construction. Initially I only used the gooseneck briefly because I found the air vent more practical because it allowed use of shorter charging cable and left the space available for a dash cam should I want to use that. But because of damage to vent moved to gooseneck. Yes it does wobble a little in transit, but no-one stares too long at the phone - or shouldn't -when driving. If you arrange to have gooseneck resting on part of top of dash, at risk of marking dash, the wobble is minimised.If you have phone in protective case/wallet then it is a little more fiddly attaching/remove phone but does work.As an aside, I recommend https://www.amazon.co.uk/gp/product/B07589CXLF as a useful aid to allowing the phone to be quickly attached to car power source (also need something like https://www.amazon.co.uk/gp/product/B0794PNBBP). Using the magnetic coupling has the distinct advantage of being quick and reduces wear and tear on the phone connector. But keep away from sources of iron filings and the like!

Good quality product, just not quite rigid enough when it has a larger (iPhone 6 plus or similar) phone attached, the arm does bounce around a little.

Very useful, easy to use and reliable. I started using the windscreen mount, but switched to the vent mount, since it doesn't obstruct visibility whilst driving. Both of them are very reliable and have never fallen while on the move. If you want to connect an auxiliary cable too (I have an iPhone 5S and no bluetooth in the car...), charging at the same time can be tricky, but is possible. I have a bulky shock-proof case and fits perfectly. would definitively recommend.

I bought one 3 years ago and everything is great. Its been knocked from pillar too post and its still excellent. In 3 years I think its come off about 2 times. Suction is very very good and its not a typo.I am so happy that Kensington hasn't replaced profit before quality. Still an excellent product. Reason for the new one is a second car.

Works as advertised. Would recommend. Good value.

Pretty flexible and does the job well.

Lo stand risulta essere ottimo. Infatti ho sempre acquistato questa marca per i stand da auto per i cellulari e mi sono sempre trovato bene.consigliatissimo

Qualité perçue irréprochableVentouse puissanteTaille réglable = bien pratiqueIl m'a fallu quelques jours d'utilisation pour optimiser le réglage :. en serrant les pinces latérales (et leurs tampons de mousse), je n'avais pas à extraire le téléphone, et le déverrouillage du réglage était un peu difficile. maintenant, je ne serre plus, et je garde un tout petit jeu latéral, utilisant le support de pied pour maintenir le téléphone en place => je peux facilement le retirer en le faisant coulisser vers le haut, tout en ayant un bon maintien pendant qu'il est mis

Simple, easy to use, good hardware. Bounces a fair bit while in motion, but the arm is pretty stiff.

Es exactamente lo que estaba buscando. Encaja correctamente con IPhone 6S. También es válido para otros móviles, ya que su soporte es graduable en anchura.