RGB GPU Holder 5V 3-Pin Colorful RGB Graphics Card GPU Support Video Card Holder Bracket, Video Card Sag Holder/Holster Bracket- 309-1

While the lights aren't quite as diffuse as some of the pictures show as mentioned by others, the bright spots aren't terrible and the overall function is wonderful. I mostly got this to fill in the dark void between my video card and power supply as my case already has a very nice GPU support, and it works wonderfully in that role. It definitely feels sturdy enough to support a GPU with all three thumbscrews snugged down. As soon as the system came on it synced with the fans and other lighting and looks great, really ties an argb buld together if you don't have an rgb video card. I'd definitely recommend this to anyone looking to add a bit more flair to their build for a very reasonable price.

Overall, I love this product so far, and it's fantastic value. The only problems I have with it are that it doesn't seem to fit my GPU perfectly regardless where I put the adjustable piece (MSI 1660TI Gaming with 2 fans), and even with it screwed in all the way, the right side doesn't seem to have any support. However, I'm a first time builder, and could just be overlooking something. Between that, and how amazing it looks, I'm still giving it 5 stars. Edit: I've now swapped out two different GPUs, and the metal piece that's supposed to actually provide support doesn't seem to fit with any of them. The second one was another MSI gaming, only a 2060 super instead of the original 1660ti, but they looked identical, so I figured maybe it was just something about the design. I've now gone to a Nitro+ 5700xt, and it won't fit that either. So, I've just removed that piece all together, and it kind of just floats there. And for $20, I still think it's totally worth it. It provides nice looking RGB to a dark area of most cases, and I've started liking the manufacturer so much, I've bought multiple of their products. They're all able to be Daisy chained right together and the lights sync up beautifully. They seriously make some high quality products at extreme budget prices!

So I just received and installed this GPU bracket along the 5v-12v converter box by the same maker. I installed this on my Asus B450-F Gaming motherboard and to my pleasant surprise, it synced up automatically with my Armory rgb software without even having to hold the sync mode button. So that was nice. The build quality is also good. It is very sturdy. Not flimsy at all. The little black bracket that supports the GPU is made of metal, which is nice. The A-RGB lights are bright and colorful. It does provide support to my slightly sagging GTX GPU, which was really an eye sore for my OCD. Everything now looks perfectly perpendicular thanks to this bracket. :) Here's my problem... The screws they provided are in my humble opinion, one "mm" too short, or perhaps I can also say that grooves on the bracket they go in, are a bit too narrow for the middle part of the screw stems, to sit perfectly flush within. So a solution can be made if one or the other is modified. Either make the screws 1mm longer or drill the grooves just a tiny bit wider, so that middle part of the screw can actually fit in it, leaving only the top part of the screw exposed, rather than the top and middle section exposed. As it is, once you attach the little black support lift and the rectangular washer in place, the screw just barely makes contact with all the pieces. I worried it I would strip the grooves if I tightened it too much (and for a heavy GPU, you want to make sure the bracket doesn't slide back down over time). Also, because the grooves aren't wide enough to allow the screw's middle sections to sit flush inside of them, you may actually chip the surface of the clear acrylic around them. To circumvent this, I actually attached the screws from behind the bracket instead of the front region and sat the rectangular washer in front of the bracket where the screws would normally sit. It works just as fine and prevents any circular scratching from the short screws. I hope EZ reads this and takes it into account. Its a simple solution to make the screws 1mm longer or drill the grooves to be just wide enough for the middle part of the screw to sit nice and flush on the bracket. :) Other than that, this thing would get a perfect 5 star rating for me. The good news is, you can work around it and even go online and look for longer screws of the same diameter that you can use with it. The bracket was a little tricky to install. Took a few tries until I felt the small support piece was just the right height to push up my sagging GPU. But not too painful. It took less than 10 minutes to set it all up. I can see some struggling to get it right. My advice is to first prop your GPU up with something (can be anything) and then attache the holder, so it's perfectly leveled. This company also seems to really care about their products and I can see them being much more popular in the coming years if they keep this up. The packaging for these items were excellent and all required pieces were included. Excellent work. (aside from the screw thing ;)

Easy to install, plenty of wire for keeping it hidden so your cpu case still keeps its clean look. Adjustable slots so it will work for a wide variety of GPUs. No more sag from heavy GPU, no more GPU strain on the motherboard from sag. Nice RGB look matching my Addressable RGB style. There is no control of the colors is the only con I see. Still worth the money I say!

I like the way how this turned out to be, the bracket does hold the GPU decently but I mostly bought for the aesthetic look since the GPU is not too heavy. The color does pop out pretty well and easy to adjust. The quality is pretty good id say and the bracket does align with my GPU properly, doesn’t touch the fans from the GPU which I was worried at first but it’s all good. I would definitely recommend it for the aesthetic or for the people who use heavy GPUs on their gaming pcs.

I purchased this for my computer build a few years ago. I don't think it really does much for supporting anything but it does look fancy and the lights still work. I had my brother install it. It didn't look like he had much difficulty.

Works with my motherboards RGB controller and synced just fine. Great bit of bling for your PC if you are an enthusiast.

جميله جدا جدا قوية و كبيره اعجبتني كثيرا. شكراً جزيلا (( AMAZON)) جميله جدا جدا قوية و كبيره اعجبتني كثيرا. شكراً جزيلا (( AMAZON)) جميله جدا جدا قوية و كبيره اعجبتني كثيرا. شكراً جزيلا (( AMAZON))

works fine

Me ha funcionado bastante bien. Solo da soporte y RGB

Es un muy buen producto, de muy buen material, la ilumicación es perfecta.