Eastman 3/8 Inch ID (1/2 Inch OD) PVC Clear Vinyl Tubing, 10 Foot Length, 98620

Great quality and fit my needs perfect

Used for low pressure air line. performing very well.

This tubing is of good quality and at a good price given the current economy imo. Like all pvc tubing it's a little rigid to work with in cooler temperatures. It does have a memory and likes to curl back into the circular shape. A little heat from a hairdryer may help but this isn't an issue for me.

This tubing appears to be made well and true-to-size. I won't hesitate to buy it again; however, there are two packaging issues that could be improved. The tubing is packaged in a roll secured by three twist ties. The first issue is that the inner loop of the tubing is small enough that it put a kink in the tubing. Using a heat gun, I was able to straighten the kink and make that section of the hose--the last ~10 inches--usable. The second is that the size label is glued onto the tubing and left a significant amount of paper and goo stuck to the tubing when I removed it. My particular application leaves the tubing in plain sight, so paper/goo wasn't ideal. The paper and goo were easily removed with a heat gun. Even if the manufacturer doesn't address those two minor packaging issues, this vinyl tubing is still a good deal.

I bought this as a replacement hose for my pool cover pump. It works better than the hose that came with the pump.

Bought this tubing based on a video I found looking for something to hold the wayward thread on my sewing bobbins. I was skeptical, but thought it might work. It does. You cut the tubing in about 1/4" rings or whatever width you need to go over your bobbin thread and cut the ring open. It slides perfectly around your bobbin, holding the thread so you don't have a rat's nest of thread when reaching to use a bobbin. You can also see the thread color thru the tubing. I can make about a million rings with this tubing. There was nothing this cheap or even suitable for bobbins. This is a winner!

Anyone else sick of trying to get lotion out of bottles because the darn tubes used by brands are too short? I'm sorry I have to buy bargain and store brand lotions but do I need to be punished by penny saving crap from manufacturers? Nope, not anymore. This tubing worked perfectly to extend the manufacturer's pump tube in multiple brand lotion bottles. A two inch section heated slightly with a lighter (heat gun or even hairdryer would likely work too) to make it stretchy and pull over the end of the lotion pump tube and voila, longer and flexible end on the tube and NO MORE WASTED LOTION!!! Works great, no leaks, and easy to install. Didn't kink up or pop off. Just thrilled at the results. I literally cut open bottles to scrape out the 2"+ of lotion in the bottom of bottles and now I can just add a bit of this tubing and no more wasted lotion. I also bought a larger tube and it worked perfectly on shampoo/conditioner pumps. 20 feet of this tubing at a great price will save me tons of money and hassle in the future.

I had not bled brakes in a while and could not find the DIY bleeder I made years ago, so I figured I would just make another one. After doing the research I determined that the 3/16 ID , 5/16 OD tubing was what I needed. This time I went with the 20ft length so that I have plenty left over for when I lose the bleeder that I just made. The tubing worked perfectly as expected, was clear as described, and was easy to move and bend without kinking or obstructing the oil flow.

After less than a month of using it in potable water system, a bad smell was coming from the water. When check this tube, it was the reason. Be careful of use it for potable water system.

Vey bad quality

It’s good , but I don’t need it for what I meet for , manufacturer is do friendly, God bless him 🙏

I purchased this to make my dehumidifier continuously drain. The size was just a touch smaller then recommended in the instructions for the brand/model I had, but I couldn't find the exact suggested size tubing. Going with a slightly smaller tube, I was intending to heat up the end and push it over the drain port on the dehumidifier. It was malleable enough to push on fine and does not leak. I cut to length. Has been working great since it was installed!

I purchased the EZ-FLO 98621 PVC Clear Vinyl Tubing, and it’s perfect for my needs! The 1/2 inch OD is the right size, and the 100-foot length gives me plenty of material. It’s flexible, durable, and easy to work with. Great quality tubing—highly recommend!