8 Drawer Lingerie Bureau Walnut

The dresser is nice looking, has lots of drawers (and not too shallow) was a great price. Just wish the handles were not plastic.

Easy to assemble. You might need to use the included strap to hold this to the wall, especially if you have children that like to climb furniture. I don't have that problem anymore, so I used a pair of rubber coasters for furniture legs under the front two feet, which countered the tendency for this dresser to lean forward slightly on our carpeted floor.

For an eight drawer lingerie chest, it’s a cheap price point. Calibrate your expectations accordingly. I did, and I’m not disappointed overall. It’s sturdy enough and exactly the size I was looking for. Not sure how long it’ll hold up with use, but we’ll see!My soul did temporarily leave my body during the drawer assembly process though. It was so incredibly tedious, it hurt. You have to use brackets to attach the front to each of the sides, then slide in the thin bottom piece. However, the holes for the brackets weren’t totally centered. So that meant the grooves that the bottom slid into weren’t always aligned. Initially, I thought, whatever! It’s just the bottom piece, close enough. But then, once I went to attach the back part of the drawer—which requires wood screws—I realized that if the bottom wasn’t perfectly in the grooves, it prevented the back from aligning and the sides from screwing in all the way flush…which ultimately meant the drawer didn’t fit into the opening for it in the dresser. Oof.Fixed it by loosening the bottom bracket screws and just kind pounding things into place. Helped get my anger at the manufacturer out, as well as the anger towards myself for not just spending more to get something better quality. But this bish is WAY too heavy to return, so I was stuck.After some maneuvering, got the drawers all assembled, front handles on, and was done. It’ll definitely do the trick for now, but I’m not sure how much longevity this will have. Even ikea and target furniture have tracks for the drawers. These drawers just rest on particleboard. I imagine sawdust will accumulate from using them too. C’est la vie! Will just have to buck up and shell out for something nicer once this sucker breaks.

I like the sturdiness and easy assemble but the fabrication or perhaps it was the shipping very bad split wood, chipped drawers and the back panel was damaged. We put it together anyway because it weighs 150 lbs and I couldn't cart it to ups for return ....a bit disappointed. If it weren't for these issues would have rated 5 stars because it is exactly what I wanted for size, color, and use!

A number of issues:1) The drawer assemblies were difficult as either the bracket mounting hole locations or the locations of the pilot holes in the wood are off.2) One side panel came cracked. I e-mailed and received a quick response and a new panel was sent. However, customer service response after this was poor.3) The back panel had two issues. I discovered both at the end, although I did inspect it prior to assembly. Not sure how I missed them. The panel was cracked in three spots, but I used it anyway. Also, several of the mounting holes were drilled/punched in two spots. Very shoddy workmanship and then they do not see these problems and prevent it from being packaged.4) The formaldehyde that is used in the construction of all wood parts takes A LONG time to dissipate. It has been over a month and they still smell. Not healthy for man nor beast.Overall for the price I paid I expected a lot better quality and appearance.

THE STORE OWNER. DID A NICE JOB. SHIPPED FAST WITH NO PROBLEM.YES I WILL SHOP HERE AGAIN.THE REST IS ABOUT THE PRODUCT. WIT THE STORE OWNER HAS NO CONTROL OVER.THE MANUFACTURE SUCKS!!#1 IT IS NOT PAINTED. OUTSIDE, DOES HAVE SOME “PRIMER PAINT. “ UPON: THE “”PAPER”” SURFACE.#2. THE DRAWER BOTTOMS; ARE DISAPOINTLY. CARDBOAD. 'HARD-PAPER!”ALL THE OTHER FURNATURE PUZZLES ARE AT LEAST MDF.WIT MEANS:; NOT ONLY DO YOU HAVE TO PAINT THE PAPER DRAWER BOTTOMS. YOU ALSO HAVE TO AD: 3/4” WOOD SUPPORTS UNDER THE BOTTOMS OF THE DRAWERS.3# THE ENTIRE CARCUS. THAT IS NOT CVOVERED WITH PRIMER PAINTED PAPER. ON THE OUTSIDE ONLY, IS VERY ROUGH! RAW PARTICLE BOARD. NO PAINT.ABSOLUTLY; YOUR FRAGILE CLOTHING ETC. WILL GET CAUGHT AND RIPPED. ON THE RAW AND RUFF DRAWER-SIDES. AND! IT IS VERY UGLY!YOU HAVE TO SAND & PAINT :/ THE ENTIRE THING. WTF...THE MANUFACTURE SUCKS.#3. THEY GVE 1 1OZ GLUE. FOR A HUGE DRESSER. THEY SUCK.#5, THE LEG ENDS. AND TOPS. ARE WIDE OPEN. WITH LOTS OF SPACES FOR BUGS TO CRAWEL INTO. BIRTHING MORE. MOISTURE CAN ALSO CREEP UP THE LEGS. DESTROYING YOUR CHEST OF DRAWERS.YOU HAVE TO FILL AND PAINT THE ENDS. WTF! THE MANUFACTURE SUCKS.#6. THE DRAWER SLIDES. ARE MORE TOTALLY NAKED! PARTICLE BOARD.:/ WIT IF YOU DO NOT PAINT . AND PUT A BIT OF BABY POWDER ON THE TRACK, FOR LUBE. WHEN DRY. NOT ONLY WILL YOUR DRAWERS STICK. RIPPIG APART,SHEADING PAPER-LIKE-SHARP-SAW DUST. ALL OVER THE CONTENT. INSIDE: NOTHING BUT; “””NAKED SHARP PARTICLE BOARD.” ' WIT WILL SUCK UP THE HUMIDITY, BOEING, WARPING, CURMBOLING ETC.THE MANUFACTURE SUCKS.#7 THE L-BRACKETS. THAT HOLD THE DRAWERS TOGETHER. ARE CHEAP PLASTIC.THE MANUFACTURE SUCKS.#9. THE HARDWARE; IS LESS THAN A JOKE. “THIN” PLASTIC. ABOUT THE STRENGTH OF A MILK JUG CAP OR LESS. :(I DO 'A LOT OF' THESE KIDS OF FURNATURE PUZZLES. THIS IS THE FIRST.THAT IS 'COMPLEATLY UNPAINTED INSIDE.”#10. IF YOU WAT IT TO LAST MORE THAN 60-DAYS ; > YOU HAVE TO PAINT ABOUT 50-PIECES, INSIDE AND OUTSIDE: AT LEAST TWICE!!>>>> YOU HAVE TOO: BUY PRIMER, PAINT, BRUSHES, NEW HARDWARE, DRAWER SUPPORTS AND BUY GLUE. THE MANUFACTURE SUCKS. ;#11. THE INSTRUCTIONS, ARE EASY. THE PUZZLE IS EASY. AN 8 YEAR OLD CAN PUT THIS TOGETHER. A FUN PUZLE . MORE THAN 75 PIECES. GOOD THING TO TEACH KIDS HOW TO BUILD I GUESS.#12 THE PAINT PREP WORK IS DANG HARD! SUPPPOSED TO TAKE. ABOUT A HOUR TO PUT TOGETHER. TURNED INTO A WEEK OR MORE! AND AT LEAST 1 TRIP TOO HOME DEPOT.HOWEVER; IF YOU LOVE. THE RESULTS OF; HAND PAINTING. YOUR FURNATURE.THIS WOULD BE FUN FOR YOU. THEY ARE LUCKY! I LOVE PAINTING. ELSE I WOULD HAVE ASKED FOR A REFUND.MY ADVICE; IF YOU DON'T WANT TO PAINT. GET SOMETHING ELSETHIS PEICE TOTALLY NAKED INSIDE. AND ONLY PRIMER PAINTED PAPER ON THE OUTSIDE. >>> STINKS.I KEPT IT. ONLY BECAUSE I AM 'DESPERATE' FOR A PLACE TO PUT MY SEXY UNDIES. AND SWINSUITS. AND NEEDED SOMETHING: ONLY 20” WIDE. THE DRAWER DEPTH. IS ABOUT 4-INCHES HIGH. 3 T-SHIRTS HIGH. :/ GOOD THING THERE ARE 8 DRAWERS.MY PERSONAL END RESULT;HELLO KITTY DRESSER =^-^= LIGHTEST SHADE OF PINK OUTSIDE. BABY BLUE INSIDE. HOT PINK FUCIA.. BLINGED OUT, DRAWER PULLS. WILL NEED REPLACEING.IT LOOKS REALLY CUTE FOR MY BABY GRANDDAUGHTER PRINCESS THO.WON'T LAST HER VERY LONG THO. BUT WILL DO IN A PINCH.CONCLUSION: >>> THE MANUFACTURE REALLY REALLY SUCKS!!!!>>>. GET SOMETHIGN THAT IS PAINTED INSIDE :/