FlowGuard USA Made Professional DIY 5 Inch 50-Year Gutter Cover System - Brown - Aluminum Gutter Guards - 102 Feet - by FlexxPoint

These are without a doubt the best solution to keep the leaves out of my gutters... they were very easy to install and a perfect fit... I've seen advertisements on TV for gutter guards and they were extremely overpriced...these were a great price and the color matched perfectly they are heavy duty and will definitely take care of the leaf problem... great product

I purchased and installed this product in late summer 2014 after sitting through an exhausting presentation from one of those "leaf proof" systems that would have cost over $10,000 for roughly 200' of gutter. After the salesguy left and I stopped laughing, I went to Amazon and ordered this product and so far I'm delighted. My house is in the northeast US and is surrounded by 70-80' trees. Falling leaves have been no problem and even those that took up temporary residence on top of the guard, blew off in a day or so and I have not had to do any "cleaning" of the gutter covers at all. We had several heavy rain storms and I found that the holes in the guards can handle a surprising amount of water, even in corner areas where you have a lot of water concentration from two roof surfaces. I had no issue with water gushing over the edge, and since the underlying gutter always remains clear of debris, the water flows smoothly to the downspouts and away from the house even in a prolonged downpour. As for the winter snow, I've had no issues with snow or ice piling up on top of the guards any more than would have occurred on an unguarded gutter, and since ice and snow can no longer accumulate INSIDE the gutter, the sunlight can melt the accumulated snow on top of the guard more quickly, and runoff from the melting snow and ice flows smoothly to the underlying gutter which always remains clear. As far as the installation is concerned - you'll need to be comfortable being on top of a tall step ladder or extension ladder or find a friend who is. There is a lot of two handed work (e.g. holding the cover in one hand while you use the drill in your other hand) which you can't perform if one of your hands is white knuckled onto the ladder. I used a power drill for the screws, and you'll need a decent pair of tin snips to cut the guard to fit into any angled/cornered sections of the guttering. The cuts are simple and you can use the hole patterns in the cover system to insure your cuts are neat and straight. The product fit perfectly into the top of my guttering and was fairly easy to affix with the self tapping screws provided. The product sits just above the gutter mounting brackets so there is no need to make any "adjustments" to your gutter brackets - just drop in the covers and screw them in place. In a few places, my guttering had been "pinched" to be a bit narrower than normal or were "drooping" a bit wider than the standard 5" width, but it was pretty easy to spread the gutter out or push the sagging portion in before installing the screws. I would also note that for areas in the guttering that were sagging a bit, the cover actually helped provide additional support to the gutter, since the outer edge of the cover is affixed to the gutter and then the rear edge of the cover attaches directly to the house (fascia) which helps to pull up and straighten any sags in the guttering. I found it helpful to install the outer row of screws first for each section of cover, and then install the screws along the fascia board, then move to the next section of cover. Some of the rear edge screws are a bit of a challenge in areas where the gutter is installed high up under the last row of shingles, thus making it difficult to get your hand under the shingles to hold the screw while using your other hand to hold the drill. I'm guessing there is a gizmo at your local hardware store that would hold the screw directly on the end of your drill bit, so you might want to explore that to make it a bit easier. Once I worked out those installation details, it was pretty straightforward. It took me about a total of 10 hours over 2-3 days to install 200 feet of the product and much of that time was spent moving the extension ladder from one spot to another, and trimming and fitting pieces into the numerous corners in my guttering.

I love this product. Great DIY. Keeps gutters flowing under trees.

Has been couple months since I installed on my metal pole building with a metal roof. install was pretty easy and saved a lot of money doing myself. So far working well and really considering to put on our house. Quality is decent and shipping was quick. Recommend.

First off, if you are debating other brands of gutter guards, or, if you're wondering whether you should just hire a contractor to install a brand you can't buy, then stop! These are the perfect choice. These Flowguard gutter guards are just as good as professionally installed types, and cost so much less. Plus easy to install yourself (read on for my personal experience). So I have a large ranch home with a walkout. A few years ago I hired a contactor to install seamless gutters and gutter guard over the entire 100' rear length of my home. It was 2 stories high and I did not want to be up on ladder cleaning those. The caps cost me an extra $1500. This year I hired contractor to replace the front and side eaves with seamless gutters. I asked them to quote caps for these too. It would be a little more than last time so I thought since it's 1 story I would do it. I bought 6 different types of gutter guards. None of them were of comparable quality to the professional ones I had on so I returned them. Then I found these Flowguards on Amazon and ordered a box to try. These are almost exactly like the pro ones I have. Same thickness, same screw spacing, color, and quality. The pros are 8' vs these 4' lengths. No biggie. The pros are completely flat without ridges, and these have 3 parallel ridges. No problem, except the corner where I had to meet at 45° with the pro's. Just cosmetic. So happy!! Love these! Wish I would of found them several years ago. So much cheaper. So easy to install. I did 102' in 3 hours. INSTALLATION HELP: Buy yourself a 6" magnetic 1/4 nut driver for drill. It needs to be that long to reach over 5" gutters and under shingles. Use a short magnetic nut driver first and put the longer into the short one so you can switch between front screws and back screws easily. The back should be a little higher than the front so they can slope some. Directions say either level or have back higher, but I recommend just installing higher in the back, and you might need a pick or screwdriver to help slide the back up before putting a screw in once in a while. Go for it! They got you!

Excellent. Perfect fit and easy installation. Wish you had white painted screws though. Just makes sense for the finished touch.

The gutter guards are very well made and were easy to install by this senior man. I bought the white version but the screws were unpainted which was not a problem for me since they are hardly noticeable. I like the fact that the screws were included with the purchase. These guards were installed on my gutters around my concrete deck which was a custom design. Once installed they seem to actually make my gutters stronger. I would buy again and recommend without reservation. The seller provided prompt delivery.

I rarely write reviews , This is an exceptional gutter protection system at an excellent price. Very easy to install. Comes in different colors also , well made and I am certain I will not have any issues for life. Thank you for the value. Also says it is a veteran owned company which make it even better - Thank you to all the Vets. Sincerely Ramond G.

The product is well designed and strong enough to last many (30 ?) years. My gutter's exterior width is 4.75" and the gutter guard's thickness is just right so it is quite easy to slightly bend it into place. The galvanized metal fasteners (included in the order) can be directly screwed into the gutter without pre-drilling. Self-tapping screws having a no. 2 square slot-head would be more appropriate. The item's total length is not 4 feet but 46.25", including a 3/8" cut-off at each extremity (for overlapping of two adjacent sheets). Contrary to the description, shipping to Canada is by no way free (52 $).

Time will tell whether this product will keep the leaves out of my gutters. The installation was straight forward once I figured out that the shiny side goes up. With the screens screwed in front and back, my gutters are much stronger than before. This is similar to a product that received top reviews from Mike Holmes but at a fraction of the cost.

This is a great product and installs quickly. Prior to installation when we had heavy downpours the gutter would overflow. Since installation we have had heavy downpours and we have not seen any overflow. A great product that I recommend.

Well designed, easy to align and installation was very quick. Love the fact I will not have to clean up gutters anymore. Worth the money!!!

They are easily installed and make the eve system much more stable from ice damage. They screw both to the eve trough and the facia every foot and the ice can not get a hook on the eve troughs. Great for steel roofs.