guleek for iPhone 6 Screen Replacement Black Touch Display LCD Digitizer Full Assembly with Front Camera,Proximity Sensor,Ear Speaker and Home Button Including Repair Tool and Screen Protector

Easy to install, video was clear and concise . Overall 10/10

Been one week and works wellTop half of my original screen did not work and decided to replace it myselfIt was easy to install, took me a little less than an hourThe touch screen works great, but the screen is darker than the originalThe screen itself is also smaller than the original and zoo felt like the screen size is similar to my old iphone xAlso notifications saying that this is not a certified iphone part pops up on my settingsI only intend to use this phone until I decide to buy a new phone without reselling it, so this $60 screen replacement is fine for meBut if u are thinking of reselling the phone, I would not recommend this product

In the end, everything (except finger print) works. And there is a reason I couldn't transfer my fingerprint reader from old device....the included instructions are terrible, and caused me to break it.First, I made the fatal error of deciding to follow the included (very small printed) instructions.I started with:1. "Power off your iPhone before beginning disassembly". Easy enough! On to 2...2. "Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case".Ok...so FIRST, the suction cup was warped, and SECOND, my screen was so cracked, that air would not stay in the suction cup. So that part was worthless. So that failed...on to 3.3. "Twist the spudger to widen the gap between the front panel and the rear case". OK...WTF is a "spunger"? This is my first time, and it came with many tools. Further, the pictures are so small, I could not see which was the "spunger". They should add a tool layout with names by them. Finally looked up what spunger was and proceeded to 4.4. "While firmly pulling up on the suction cup (not gonna happen!), slide the edge of the spudger under the bottom left and right corner of the display.Took a while, but persistently pressing down on the curved glass edge FINALLY go it "in". On to 5.5. "Gently grasp the display assembly and lift it up to open the phone, using the clips at the top of the front panel as a hinge. Open the display to about 90 deg angle, and lean it against something while you're working on the phone".OK...the bottom would NOT come up. I tried and tried, applied more and more pressure, and inserted the "Spunger" farther and farther inward. Eventually, I found out what the problem was: the 2 screws near the charging port at the bottom were not removed, nor did the instructions every SAY to remove them!I went back and looked at #1, and noticed two very faint red circled around the screws in the picture. But again, the instructions, which I was gonna follow precisely, never said to remove the screws. How was I supposed to know, I've never done this and don't know how the device is laid out inside!Well, all the major pressing and pulling severed my fingerprint reader cord. Good grief. Well, that sucks. I removed the screws, and voila, it opened up. (facepalm).At this point, I went online to find better instructions. I even found a webpage that looked similar to the small/included instructions, but much much better.In the end, my device works, but without fingerprint. OH...don't forget to buy an adhesive ring! It is a rectangle that goes around the edge of the phone. They DO include some 3m double sided tape, with various size cutouts, but NOWHERE in the instructions do they say what the hell to do with them (par for the course).The included screwdrivers worked like a charm, wow those screws are tiny. Use the magnetism to pick them up and place back in the holes when assembling. Overall, the screen fits well, but the home button seems every-so-slightly loose. Not too noticeable though.

I got this to replace a broken screen to give to my son. I realize it’s not genuine so the screen is more susceptible to breaking. Thankfully they provide you with a screen protector. It fits perfectly and any novice could install it. It’s a cost effective screen that works as intended. Good purchase.

iPhone 6 Screen Replacement White Touch Display LCD Digitizer Full Assembly with FWorks okay after installation

Great

1.)The screen has a blur going down the center and a few “blur dots” on random spots of the screen.2.)It doesn’t fit properly you can see light coming out of the sides of the screen.3.)Really fragile it cracked with the phone just boing in my pocket

The screen is responsive and overall has good color quality, in addition to being a direct drop-in replacement.I however have a small area of discoloration at the top of the screen and a small area of light leakage right at the top edge about 1/3 of the way in from the right edge. It's a 6 year old unsupported iPhone 6, so I'm not expecting perfection at this price, but be aware the screens may not be perfect.UPDATE: The screen has ghost taps going on all over it. Leave the phone unlocked and set it down and within 10 seconds something will have been pressed. Makes using it any kind of fashion almost impossible since something inevitably gets clicked and generally results in horrible frustration.

El pedido llegó como era de esperar en iempo y forma. Monté la pantalla e incialmente funcionaba bien. He montado varias, sin reparar demasaido en el proveedor, y tengo que decir que en otras ocasiones el brillo dejaba mucho que desear. No es el caso de esta, la pantalla brilla - diría - como la original. Al rato percibí que el teléfono tenía un comportamiento extraño y además el digitalizador (pantalla táctil) no funcionaban correctamente. Contacté con el vendedor, que contestó en minutos dándome unas indicaciones antes de proceder a la devolución. Aunque la devolcuión en Amazon es (demasiado) sencilla, pedir una pantalla nueva y devolver la actual, además del inncesario impacto medio ambiental, supone estar 24h sin móvil. Seguí las instrucciones del vendedor1) desconectar cable pantalla2) desconectar le cable de la batería3) volver a conectar el cable de la batería4) conectar los cables de la pantalla5) comprobar todas las conexiones6) reiniciar el dispositivo (tecla HOME y encendido apagado durante 10 seg)y ¡todo perfecto!De esto hace ya casi una semana y todo va sobre ruedas. En base a mi experiencia sólo puedo recomendar este producto, que además viene con un protecto de pantalla.

La pantalla funciona muy bien, y es cómoda de instalar ya que viene con todos los componentes instalados. Si no fuera porque el sensor de huellas hay que cambiarlo y que la cámara frontal no funcionaba. He tenido que desmontar y cambiar todo el Flex de los componentes de sensor de proximidad, auricular, cámara frontal y sensor de huellas. La pantalla en si funciona bien. Pero a dado más la lata para echarlo a funcionar desmontando todo lo dicho. Al final me hubiera costado más barato porque el trabajo hubiera sido el mismo o menor.Por lo demás, envío rápido prime, las herramientas que trae son de calidad para lo que se ve por ahí, viene muy bien empaquetada y con instrucciones para el que no tenga ni idea. Y el cristal templado que se agradece, aunque no cubre toda la pantalla

Stufo di rivolgermi al centro assistenza per cambiare il monitor che a seguito di una caduta era diventato parzialmente nero, in occasione del cambio batteria ho decisop di cimentarmi anche nel cambio monitor. Il kit viene fornito con l'occorrente per lo smontaggio e cìè anche un manuale in cui ci sonom le istruzioni. Consiglio di ricercare un tutorial su internet e poi provarci, io ho fatto così e ci sono riuscito al primo tentativo.Sono ormai 5/6 settimane che uso il telefono e va benissimo.Consugliatissimo.

Para lograr que funcione la huella de mi dispositivo he tenido que cambiar la placa base adosada a la pantalla, en su parte trasera, de la pantalla vieja a la nueva, cambiando solo el botón, como indica el anuncio, no funcionaba, resultando que; compré esta opción de pantalla con todo incorporado para no tener que estar cambiando piezas de una pantalla a otra y al final he tenido que cambiar piezas de un dispositivo a otro, para esto, podía haber comprado solo la pantalla y me hubiese costado la mitad de lo que he pagado. Sugiero que pongan toda la información en el asunto, no creo que me haya pasado a mí solo.

La instalación fue facilísima. Al principio no me atrevía, pero le eché valentía y me puse a ello. Con el vídeo explicativo, me resultó muy fácil instalarla! Solo hay que tomarse el tiempo necesario y seguir los pasos con cuidado y la instalación sale perfecta.Sin duda, compraré de nuevo esta pantalla si lo vuelvo a necesitar.