Wilkinson 53.5mm (2-7/64 inch) String Spacing FR Style Double Locking Tremolo System Vibrato Bridge for Electric Guitar, Chrome

Great so far, it fits my Kramer BS guitar!Sorry, if your going to put this on a Kramer baretta special and have no experience on woodworkingor it's your first time, you should get a luthier to do it for you or show you how, cuz the posts do not have the same ID as a Floyd Rose and will have to fill the old ones in and redrill them; also you will have to route some on the body as well. I have mine set up floating and it stays in tune fine, so worth the money, I hope this helps!

I’m used to real OFR trems but decided to a chance on this unit for a project. Boy was I surprised! Besides the base plate and block, the saddles and screws are steel! For the money, you can’t beat this trem!

Is it a $200 Floyd Original or a Gotoh Floyd? Nope. But it works, just don’t expect a flawless perfect Floyd. If you’re a light tremolo user or just want to block the tremolo completely then this one would work.

This is an excellent tremolo system, as I is sturdy, well-made, nicely finished, and equally fluid in its action/mmovement. I am quite satisfied with the finish on the saddles themselves, as it creates a unique two-tone appearance that is quite appealing, and the finish, itself, is durable and preventive of hand wear. As well, the addition of the set screw via mini Allen wrench adjustment for the tremolo arm is simply a "no-brainer", as it serves well in setting the "tightness/feel" of the tremolo arm, to one's liking.The block is of standard size, made of zinc, however, the mounting screws are of different head/thread size, therefore, if planning to upgrade the existing block, it would require custom ordering/etc. Although this is not a complaint, it is a factor if intending to upgrade the block to a different material (brass, titanium, copper, etc).This is a well-made tremolo unit, and, although I nearly exclusively use either Original Floyd Rose, or Gotoh tremolo units, this is certainly nice!

The first one they sent me installed fine. A couple of days later I noticed the tuning would not hold. I took the unit off and noticed the. Lower knife edge had chipped out on the stud.I ordered a replacement and the second one had a bad block. The springs would not seat as the holes were too wide and shallow even with the provided springs. I ended up having to switch the block from the first to the second to get it to work even close.The bottom line is this unit is complete junk. Don’t waste your money. Wilkinson used to be known for affordable good quality bridges but I guess not anymore. If I was Trevor Wilkinson I would be embarrassed to have my name on this crap.

Much better than oem licenced Floyd that came with my guitar. Saddles and base plate are actually steel and not pot metal.

I was looking for a price/value upgrade for my ILT Ibanez cheap Floyd Rose, just when I finished the instalation of this "new" Wilkinson bridge, I proceed to stinging the guitar and I felt the D string saddle was a little loose, I tried to thighten it but it was so loose that never got to thread. A closer examination of the bridge plate revealed that the hole had stripped threads.Now, how am I supposed to properly intonate that D string, I was expecting a better QC from this company, which seem to be placing good products but, in this case I was wrong.

I didn’t have this installed on my guitar for more than a few hours until the trem bar broke in two under normal use. Now the whole system is unusable. I would return it but it is already installed. Honestly disappointed because I have used Wilkinson before with great results but this is just unacceptable.

Nice design and quality. Saddles are excellent. The baseplate design is nice, however the steel used here is not as hard as an official Floyd rose. You will see wear similar to a Floyd rose special with use, however this is at least $40 cheaper and comes with a locknut! The fine tuners are superior to the FRS as well. I’ll probably buy a few more of these in the future.

使い勝手は中華のFRと変わりません。ブリッジ側でロックするのは相変わらず面倒くさいし、上手くロックしないとすっぽ抜ける。スプリングは強いので、しばらく使ったらこちらの方が安定するとは思います。ジャンクギターに ライセンスドの中華フロイドローズをインストールして使ってました。特に壊れた訳ではないのですが、スプリングが弱くて2〜3日で全体的にフラットする。その度にチューニングしていると、1ヶ月くらいで弦のテンションに負けてブリッジが浮いてくる。。仕方ないのでドライバーでハンガーを押し込んで調整して。。の繰り返し。。で、結局限界まで押し込んでしまった。スプリングだけ変えてもよかったのだが、wilkinsonブランドなら中華でも多少は信頼できるかなと購入してみた。スプリングは強いので安定性には期待。追記オクターブチューナーの六角ボルトが奥の穴に刺さりにくい。また、ボルトの効きが弱く感じます。しっかり締め込まないとズレてきます。

It seems a lot more durable than what else is out there for the price, it stays in tune. I am very satisfied. it replaced an old no-name FR.

概ね満足ですが、ファインチューナーの可動域が狭すぎます。後、ファインチューナーのネジ山が意図的？につぶされていて外せません。アームは差し込み式ではなくアームに内ネジが切ってあり、回して取付けてサイドのイモネジでトルク調整するような感じです。

Materiali discreti e buona fattura, attenzione se volete cambiare il blocco inerziale perché ha i fori per il suo fissaggio di 4mm e non di 5mm standard.