Are you tired of big, boxy, hard-to-read TDS meters? So are we! That’s why we built the AutoAqua Titanium Series TDS meters. They are small, easy-to-use, and have a big bright screen to make checking your TDS fast and easy. The Titanium S3 also has a magnetically coupled controller to make it easy to pick up and stick back on the metal frame of your reverse osmosis system. There is no other TDS meter on the market like it! The Titanium S3 features three titanium probes, which provides excellent protection against corrosion, to measure the Total Dissolved Solids (TDS) in your water. You can put one probe after your source water, another after your TFC membrane, and the third after the DI catridge. With a single push of a button, you’ll get an accurate reading of the TDS in your water! Push the button a second time to check TDS using the second probe. Push it again to check with the third probe. It’s so easy! The reason hobbyists measure TDS is to ensure the water produced by their reverse osmosis (RO) or reverse osmosis/deionization (RO/DI) system is safe to use in an aquarium. The Titanium S3 TDS monitor can be used to check the quality of your inlet and outlet water to help you determine when it’s time to replace the cartridges in your reverse osmosis system. This is the most common application for a TDS meter in our hobby and the Titanium S3 is ideal for the job with an accuracy of +/- 2%. You’ll know precisely when to replace your carbon block, DI resin, or TFC membrane to ensure your aquarium water is pure and so you aren’t throwing away good cartridges prematurely. It’s super easy to install, too. A ¼” push connect union tee is included to make setup a breeze. You can calibrate the Titanium One to ensure long-lasting accuracy. To conserve battery life, the unit will turn off automatically after 3 minutes of non-use. The battery is not proprietary, either.
R**.
tried 2 both junk
Product is junk, purchase first one would not calibrate, battery nearly dead, returned for a second one, same problem. don't waste your money
Z**R
May need calibration
After my HM digital tds meter seems fried after one splash of water ( ERROR no matter what I tried . I didn't submerge it or anything ), I wanted to try something different.Autoaqua is very different from HM digital.Indicater is bright, doesn't look like you can make this light off.Meaning battery in this might not last very long.Actually battery came with this showed low battery warning in first day and died after few weeks. It was on only when I need it and this has auto off. Now I'm using this with Duracell 2032 3V lithium ( you can't swap from HM digital ) .This is not made for AC adapter. May be you can mod.TDS reading shows 001 sometime 000 after just RO ( usually around 003 with HM digital ) makes you wonder how accurate this is.If you have DI, this could be a problem.I got RO only , this might be enough to monitor my system.If you're to calibrate this, manual ( you have to find it from internet and it doesn't offer much ) shows how to do it. But this brand doesn't offer such kit.May be HM digital calibration kit might work with this.I'm not planning to splash test this.Let's see how this last.Problem is thre is not much choice available for inline TDS meter in this price range.
Trustpilot
2 weeks ago
1 month ago