QILIPSU Waterproof Junction Box IP67 Outdoor Plastic Electrical Project Enclosure Weatherproof with Mounting Plate, Wall Brackets, Hinged Grey Cover 5.9"x5.9"x3.5"

I purchased the 8.6"x6.7"x4.3" SSL version and here are my thoughts on it for anyone using it for amateur radio: I purchased this size so it was thick enough to allow me to run coaxial cable into my house without bending the cable. This worked well and the metal tabs on the outside allowed me to attach it to my house (vinyl siding) easily without any modifications. The plastic didn't seem PVC durable and I felt if I drilled it with a larger diameter drill bit it could crack. To solve this issue I clamped a piece of wood on each side of the holes I intended to drill which prevented cracking and worked great. I also needed to cut a 2 1/8" hole in the back to run a PVC conduit pipe into my house so I could have several coax leads going inside. Again, I clamped wood on both sides and drilled the hole with no cracking issues. Later I needed to drill a small hole for my ground wire and using a small bit with no wood it came out fine. So what's my point here? If you're going to drill a lot of holes in this box to run cables and avoid cracking it use this method to prevent damage. The box itself seems like it will hold up fine. It's winter here and I've had no moisture issues but once summer storms roll around we'll see how well it works. I honestly do not anticipate any issues. I would definitely purchase this box again for future projects. The latches for the enclosure also seems fine. I did purchase "cable glands" which you can find on Amazon. This allows you to run cable and keep your holes waterproof. I mounted them all on the bottom of the case so I don't anticipate any rain water penetrating the box but, again, time will tell. Overall I'm happy with the intended outcome for amateur radio purposes. Last note. I ran RG-8X cable in and if I was to use RG213 or LMR400 I still think it would work ok with the larger diameter cables but if there was a lot of stress at the cable gland I might consider something a little thicker as this case is slightly on the thin side from a durability standpoint.

I used this to protect my controller on a solar tracker. Easy to install and seems like a quality item.

High quality. Waterproof is a A plus.

This fits our fence charger perfectly. It looks nice and works perfectly. It was easy to install.

Good for what it needs to do. Great size for the price vs other options on Amazon. Was able to fit 2 pairs of adapters and controllers for govee lights easily. Saves them from the elements. Couple of cons though. Doesn't have cutouts for ease of use, so you need to drill holes which is time consuming and needs right tools. Doesn't come with npts for clean Waterproofing.

Perfect box to mount a flo by moen smart shut-off valve/leak detection. This installation was outdoors and I needed a good weatherproof box to mount it in. This did the trick! Solid construction. I drilled a few holes in it for my water lines and the power supply. I didn't use the included brackets to secure it to the exterior wall i simply drilled a few tapcons directly through the back of the box into the stone wall. The box is very secure on the wall! Overall a great product! Door seals tight and feels firm, rubber seal prevents water from getting in.

Strong, waterproof, price is right!

Very nice box for the price. I was pleasantly surprised by the quality and fit of the enclosure. I will make a go to for my projects.