SUNLU ABS Filament 1.75mm 3D Printer Filament ABS Tangle-Free 1kg Spool (2.2lbs), Dimensional Accuracy of +/- 0.02mm ABS Transparent

As a complete novice to 3D printing, I have to say this material is amazing. The colour is fantastic and working with it is also amazingI found the best settings were 255°C @ 40mm/s, any lower and I got layer separation.Totally recommended!

Perfect material, works just as it should.

Pretty standard filament. Has worked fairly well for me so far. Had some issues with residues left over on the hot bed but not sure if that's the plastics fault or the bed s and I don't keep it in a dry box so l that probably doesn't help

Quick to arrive, quality product. Did what it was designed for.

Initially, I had some lamination problems using a Zortrax M200 but traced the problem to the extruder nozzle having a slightly blocked hole. Using a new 0.4 nozzle and an extrusion temp of 260C I have been getting great results and am happy with this ABS filament. I have built several models about 12cm high with thin walls of 1.25mm with perfect results. I have made small models e.g. specialist sewing machine feet with good results. I have not tried a large solid model yet.

At first I couldn't get the correct adhesion however after tweaking the settings it worked well. I used a raft to aid the adhesion with a bed temperature of 110. The nozzle was set to 250 on my Anycubic Mega-S. It helps enormously if you use something like a glue stick on your bed to make it stick for the duration of the print!

Smells more than rigid ink, but half the price. Too bad rigid ink is gone.

The media could not be loaded.  Horrible quality. Had it out of the pack for 5 days and it snaps like spaghetti. Also the colour is nowhere near as vivid as in the pictures. It's a very dull almost transparent orange.

Je n'ai pas une grosse expérience en impression 3D, mais j'ai déjà quelques réalisation en ABS. Celui là est très bon! Très bonne adhérence, Warping limité et rendu très beau. J'ai imprimer une tour de température ABS allant de 250° à 210° et le résultat est superbe. Très uniforme sans aucun défaut.

Après 1 an, le fils devient cassant et ce n'est plus possible de réaliser des pièces. Cela a été mon cas mais est-ce le temps en cause, la qualité ou le stockage ? Au départ j'avais mit 4 étoiles, j'en retire une.

J'ai pas eu de problème pour l'impression sur une QIDI

Impossible de lisser cet "ABS" avec de l'acétone!Dommage car cela fiche en l'air le rendu "fini" de l'impression 3D.Je l'ai utilisé avec les paramètres habituels H250/B100... pour de l'impression ABS, rendu identique que pour les autres ABS (Geeetech...) et pourtant, il ne se dissout pas dans l'acétone!Monsieur le fabricant, votre ABS c'est quoi exactement? Avec quoi lisser les impressions?

bon rapport qualité prix. Fonctionne bien pas de boursuflures ni étirement. facile à imprimer