Wall Control Pegboard 16in x 32in Horizontal Black Metal Pegboard Tool Board Panel

I ordered 2 of the 16H x 32W panels for our laundry room, and another half dozen panels (some horizontal, some vertical) for my workshop. Overall, I am very pleased with them. They are extremely sturdy and work as intended to hang tools, the ironing board, our Dyson hand vac, etc. (I used self-locking hex nuts with nylon centers to mount the Dyson, which fit the spacing in the board perfectly.) I have given the product 5 stars, but would have given 4.5 if that were possible, because of 2 issues: First, the hooks have a tendency to come loose, even with the (somewhat annoying) double-movement to insert or remove. I came up with a solution to the problem: I use rare earth magnets to retain the hooks in the board. Small oblong magnets for the Wall Control hooks (which are flat), and round magnets for all of my old "legacy" hooks left over from my old masonite wall boards (Insert the magnet underneath the hook, between the mounting pins; that keeps the hook from coming out, and from pointing downward). The other issue is that these boards are designed for studs that are 16 inches on center. If the studs are not spaced exactly 16" OC, then you have to use the drywall anchors, which are barely up to the job of supporting the panels, let alone any tools. Fortunately, I was able to get at least 4 out of the six mounting points for each panel aligned over studs. The 3rd pair of holes are in drywall, but all they really do is hold the panel snug against the wall. The other 4 are really what's carrying the load, weight-wise. You can see where I cut a little strip of paneling to fill an odd space between studs. One other thing I really like is the brackets for hanging an LED shop lamp. Notice in the photos that I attached the brackets at the ends of a panel, which lets me take advantage of running screws through the pre-drilled holes in the brackets, then thru the pre-drilled holes in the panels themselves, and then into the studs. Nice and secure. The brackets do a perfect job of suspending the LED light above my bench. So maybe 4.75 stars. Anyway - try them, you'll like them. They sure beat masonite, IMHO - especially if you use my little trick of rare earth magnets to retain the hooks.

I have 10 of these panels. -Quality is top tier with the gauge of steel plenty thick for hanging to max load capacity, as long as panels are screwed into a wall stud or metal post -Pegboard Holes can be used with either the Wall Control Hooks or with standard metal pegboard hooks, making this pegboard a very good value

It is always a pleasure when you order a product and it performs just like you would expect it to. This system is tight fitting, very well made and I would expect that this product will last a lifetime. Just wish that accessories were more available other than a package purchase.

Quality construction and packaged well so no damage while shipping. Drywall screws were low quality (half broke) and the mounts are expensive but you can’t beat the color options and premium metal look— a pegboard upgrade for sure!

Works well. Very durable. No complaints!

Recently retired and went all out on doing my garage, something I've been needing and wanting to do for quite some time. I knew i wanted to incorporate some pegboard, but already had black as a base color for everything so I went with these galvanized metal pegboards. First off, they look great. Second, they were super easy to install and for their weight, are really sturdy. I bought some heavy duty hangers to use with them and they're perfect. For an added touch, I decided to backlight the pegboard sections with LED lights. Yes, completely overdone but it's pretty awesome.

We installed this in the garage, over our workbench, and it looks great. It's very easy to install, very sturdy, and holds a lot. Regular pegboard hooks work with it, too. We put up two of the large panels, and would definitely buy these again if ever needed.

I needed to install this around a wall outlet near my workbench, and used a angle grinder and some bending pliers to make it work. It wasn't pretty, but is thankfully concealed mostly by the wall plate I put on the outlet box extension:). I had to do the same to keep a continuous hanging surface around a wall mounted cabinet as well. One thing to note is that the way the panels are bent, a lot of the rigidity is in the C channel around the edge, so if you cut that work around something, as soon as you do that, the panel gets pretty floppy and you'll have to back the cut edge with something else. Any way you slice it (!), these are great panels, and once you figure out how you want to use all the different hooks and whatnot with your tools, it's a slick set up:)

metal pegboard well made

These steel metal peg boards are great , easy to install , now my work beach and tools are well placed and easy to get the hand tools are not scattered at different locations. Everything is well managed .Big difference from before and after. Should have purchased these horizontal and vertical peg boards long before.

القطعه ممتازة لتنظيم العدد تتحمل اوزان ثقيله

La versatilidad del producto hace que lo puedas usar casi para cualquier tipo de estante, en mi caso lo usé para unas repisas para que mi hijo coloque ahí sus juguetes.

just like the last time i got a peg board from you guys the quality is great