Weller Digital Soldering Station - WE1010NA

Did not realise that this item was manufactured for the American market therefore it is no good for the British households. I only realised this when I was putting it together and the plug is totally different to British plugs. I am looking for a refund of this item and hopefully I can find a replacement which is made for British use. ☹️

I bought this for my husband in April, kept it safe and hidden and gave it to him the other day for his June birthday at which point he discovered that it was 120v and not 240v - so unusable in UK. This is sold on the Amazon UK site and as someone who was given a name of a thing to buy, I would need to have read and understood the small print at the bottom of the page to have caught on to the fact that it was not for UK use - this is such an important fact that surely it should have been stated somewhere more obviously. Anyway, I unwittingly bought it and now we have spent days trying to find a part online that we can use to change the transformer to 240 v. It wasn't even until I'd bought it that I realised it was being shipped from USA but even at that point it didn't occur to me that it couldn't be used here. So ultimately, I am sure it is a great item, but at the moment, we can't use it and by the time we find, and pay for a part... it will have cost a lot more than I bargained for... if it works at all. Really, why is it on the Amazon UK website at all? It was indeed my fault, but I think a little more help and clarity on the sellers page would have been useful.

The Weller soldering iron didn't work at all no power to it what so ever I sent it back straight away and I've had no refund or no reply at all

Reading the specification and other reviews of this particular advert it is NOT SUITABLE FOR UK it's advertised as 120v ac...... UK is 230v ac. One review says handle gets too hot, maybe plugged into 230v mains? Weller soldering equipment is the best but please check mains voltage rating before ordering. This is available as a 230v unit from other sellers.

SUMMARY I love my WE1010NA and would heartedly recommend it to friends and family. It is very well built, easy to use, and has precise temperature control while soldering components. DETAILS As a recently retired engineer specializing in electronic manufacturing for many years, I’ve often borrowed time on different types of soldering stations. Generally, the soldering specialists on the manufacturing floor had Weller-brand stations that were larger (more powerful) and more sophisticated. Still, the WE1010NA gives essentially the same performance, but with a lot more bang for your buck. 👍 The first thing I noticed upon unboxing the WE1010NA was its quality. Though Weller was originally an American company, it is now German. The WE1010NA was designed in Germany and is made in Mexico. 👍 Even the cradle for the soldering iron is made of what appears to be solid die-cast zinc with a durable black powder coating (paint). And that’s good because you want a heavy cradle that doesn’t easily move around and tip over as you use it. 👎 The only thing I didn’t like about the WE1010NA is a small detail on that nice heavy soldering cradle: It had only three holes for spare soldering tips; the remaining five (three in a column to the right and two on top) were smaller ones for accessories of some other sort… I don’t know what. Since I had also purchased the five-piece Weller soldering tip assortment, I wanted a proper home for them, so I merely enlarged three of the smaller holes with a #2 drill bit (Ø 0.221″). 👍 The second thing I did upon unpacking my WE1010NA was check that it truly pushes 70 watts of heating power to the soldering tip; I measured a total soldering station power consumption of 66 watts. Assuming the heating circuitry is 90 percent efficient, that’s 60 watts at the soldering tip, which is close to the claimed 70 and good enough for electronic soldering. BACKGROUND INFO: What you want with any soldering iron is a quick response to boosting heating power to the soldering tip after you wipe it on the wet sponge and begin soldering. You also want the same quick reaction time when you start soldering something with appreciable thermal mass, like a 16-gauge (1.3 mm²) wire to a contact terminal. And, of course, you want accurate temperatures. 👍 See the accompanying video showing how precisely the WE1010NA controls tip temperature. The first thing I did after unboxing my Weller WE1010NA was calibrate it using its “OFFSET” adjustment feature. In my case, I calibrated it to 183 °C by wrapping the tip with a 63/37 tin/lead eutectic solder, which has a sharp melting point of 183 °C; that is to say, it has no melting *range* throughout which it is partially molten, or plastic. As you can see in the video, my WE1010NA was off by only 2 °C. The eutectic solder wouldn’t melt at an indicated 180 °C and immediately melted and fell off the tip at an indicated 181 °C instead of the proper 183 °C. A simple –2 °C offset, and I had my WE1010NA dialed in perfectly. HINT: Unless you are building for-sale equipment certified as being compliant with strict IPC specifications, the primary objective when setting the temperature of soldering irons is to keep the tip temperature as low as possible without suffering any tedious delay in getting your components up to temperature; this increases tip life and avoids excessive time dwell and overheating of electronic components. Usually, I keep my iron set to 100 °C beyond the melting point of my solder (283 °C setpoint for 63/37 Sn/Pb eutectic) for low-mass soldering like SMT components and ¼ W resistor leads. And I’ll go as high as +130 or 140 °C beyond the melting point (313–323 °C setpoint for 63/37 Sn/Pb eutectic) when soldering objects with significant thermal mass like larger-diameter wires.

When you have hundreds of audio cables/connectors to do you begin to realize the value of a soldering station. I shopped for HOURS trying to save a few bucks as these aren't cheap. Gave up after watching so many youtubes/reading reviews and went with the Weller soldering station. Glad I did! Temps seem accurate and this unit is an absolute joy to use because of that. Build quality seems solid and it sped up the task greatly. Highly recommended if you are looking for a good soldering station form a reputable brand of decades. No regrets here whatsoever!

Calidad 10 de 10, es el segundo que compro y la verdad son muy buena inversión para el taller de reparación....

GOOD PRODUCT

Simple control for temperature. After idling it cuts the temperature about half, you must touch one of the temperature controls to bring back on set temperature. Nice clear large display. Bought this unit because we had 20 of them at work and it does a great job not only there but at home. Standard power cord and small twist connector for soldering pen, easy to get started. Just remember to tin the tip before you attempt to solder anything. I have three other Weller, and the price is reasonable, in my opinion.