MYNT3D Super 3D Pen, 1.75mm ABS and PLA Compatible 3D Printing Pen

A few years ago, I purchased a different 3-D pen, and had problems with it. I sent it back. A while back, I decided to take a chance on another 3-D pen, so after reading lots of reviews and watching lots of video, I bought the Mynt3D Super 3-D pen. It was extremely easy to learn and use. I made crafty things and I used it to build small characters. I even used it to put together a HO-scale train engine for my train layout, using parts from a couple different engines. I absolutely loved the pen! A few weeks ago, the motor suddenly stopped working. The pen would heat up and the lights would display as normal. I first contacted Amazon, since I bought it through them. The customer service rep I spoke with was very helpful as far as taking information and trying to trouble shoot. However, he was not able to fix it (obviously), so he contacted the manufacturer and completed the warranty information for me. The very next day, I received an email from MNYT3D asking for a little more information. I responded and waited a week or so. Apparently they had responded back and the email must have gone to my junk mail because I missed it. When I emailed back to see if they had received my email with the extra information, they replied that they had, and that they had sent an email asking if my mailing address as listed was still correct. I replied that it was, and less than a week later MYNT3D sent me a brand new product. Not just the pen, but the whole box with the power cord, little tools, and the extra ABS filament. A whole, brand new, unopened box! This is the type of customer service that keeps customers coming back! I very much appreciate their quick response, and their standing behind their product. I emailed to ask if/how they needed me to send the broken unit to them, and they told me I didn't need to send it back. So far, the new pen is working perfectly. When it does eventually wear out, I will not hesitate to order another one from MYNT3D. I've even let others try it out, and they loved it too! As long as this pen keeps working, I'm definitely a satisfied return MYNT3D customer! I highly recommend anyone purchase this pen and give it a try!

I bought this 3D pen for my nephew and he was obsessed with it. It kept him entertained for hours, and he picked up how to use it pretty quickly. It’s fun, creative, and a great way to get kids thinking and building. The pen works well with both ABS and PLA filament and heats up fast. Controls are simple, and it feels sturdy enough to handle regular use. One tip: definitely order extra filament. It goes fast, especially once they get the hang of it and start making bigger projects. Overall, this was a great purchase and an awesome gift. I’d buy it again in a heartbeat.

Pen is good, not much instruction. Limited to the complexity it can achieve . Fun to learn with.

We bought this for our 12yo son and have since gotten it for several friends as gifts as it’s a fun and creative toy of great quality. Once you get the hang of it they can spend hours creating items.

10 yo daughter loves it. Wasn’t use and heats up quickly. I don’t know enough about them to make a huge investment and this one seems to be great for the price. The rubber mat with grooves is great for learning how it handles before going right to a flat surface.

Loved my pen so so much, bought in march 2025. I use it almost every single day. I make all kinds of things. Mostly i use it to fix my 3d printer prints when i have a fail. Or if they are a complete disaster i recreate them into something else. Then i clean up the model w tools and paint it all up. I have also done many free hand designs with this pen. It is Amazing Right?? 😢😢😢. Until it stopped working last night. I am trying to contact customer service through the company. I can’t through amazon at all. Its obvious past the amazon return window . But has the seller warranty if they do infact get back to me. I would love to use my pen again. I guess if they don’t contact me i will leave the review as is. If they contact me i will update with them hopefully sending me the replacement. If not i guess i have to buy myself the professional version. If i go that route i am guessing i need to try to find a rechargeable one.. pros 🤓🐠can make anything you dream of practice, practice 😄Can be used to repair 3d printer fails 🤓Use it to recycle 3D printer poop and supports and rafts from 3d printer. 💜Can make pretty intricate designs ❤️So much fun I think this is for most ages 6-106 if properly supervised. And if trained to keep fingers off hot end. Cons 🥲 it died after 2-3 months The other slightly annoying thing after not using it after about 60 seconds it goes into a sleep mode. Then you basically push the extrude button to power back on it reheats and you go again. Not a huge deal definitely a safety feature because you could walk away and forget to unplug and catch house on fire. So actually not annoying after all. I do wish it was cordless reachargeable so i wouldnt be stuck to a socket. Lastly Whyyyy Did it die in only 2 months??? Customer service please help a girl out. This is my very first 3d pen i loved it till it died. Enjoy my artwork not perfect but i am still improving and teaching myself new things. So the dragon the supports failed during printing this beautiful dragon for myself . I am not the designer of the original dragon. I found it on makerworld to print for myself for free. That is important to mention. Since it was trash it or remake it w the 3d pen i chose remake. The legs, feet, claws, parts of the wings , and parts of the face are made with the pen. Also i made the cliff myself as well. I used PLA supports and rafts from other projects to help form this rock cliff. Then i attached the dragon to the cliff face with the pen. Then i started reforming legs feet and clawswings and and face. Then i went out and sprayed the entire thing w rustoleum black spray paint. Dry over night. Then i drybrushed all the Metallic paints on then sealed w rustoleum clear coat in satin. I like to clear coat my items. I used all acrylic paints for my painting. Sometimes i use acrylic markers too which makes some items much easier to paint. I haven’t painted the unicorn/Pegasus yet. On her i made the horn, mane, flowy tail, and wings. And the extra designs on body. I may have over done the curl wig on the head. I probably need to trim it back and sand before painting. But hey its fun to play. These are just some of my Frankenstein creations that would have been trashed but i kinda saved them. That’s to the awesome pen. She is from an artist that i subscribed to on Patreon. Once in a while i have a failed print. Again pen why did you have to die

Great value for the cost. Very easy to understand how to use. There’s a button to adjust the speed of flow which is awesome. Sturdy quality

Works really good so far. It heats up quickly. It has a speed feature so you have more control of what you are making. It also has a continuous function so you don't have to hold down the button. All in all it hasn't been that bad. Still trying to get used to using it. It's not very loud pretty quiet for the most part. It gets hot enough that everything adheres together pretty well. It feels a little cheap but it still works good.