CAP Barbell Weight Plate Rack for 1-Inch Weight Plates

This is a high quality and surprisingly sturdy rack. It has plenty of space to hold all my 1" plates. The legs are wide enough for stability but it doesn't take up a huge amount of space.

CAP Barbell Weight Plate Rack for 1-Inch Weight Plates Overview: The CAP Barbell Weight Plate Rack is a purpose-built storage solution for organizing 1-inch weight plates. Engineered for durability and practical use, it serves both home gym users and commercial fitness facilities effectively. Design and Build Quality: Constructed from high-quality steel, the CAP Barbell Weight Plate Rack is designed to be robust and long-lasting. Its steel frame features a sleek black powder coating that enhances both its appearance and resistance to rust and scratches. The rack's vertical design includes three posts, each with 1-inch diameter holes to securely accommodate standard weight plates. The posts are well-spaced for convenient plate loading and unloading, and they feature rubber or plastic end caps to protect the plates from damage. Assembly: Assembling the rack is relatively simple, with clear instructions and all necessary hardware included. You'll need a few basic tools, like a wrench and screwdriver, which are not provided. The assembly process typically takes between 15 and 30 minutes, depending on your experience with similar equipment. The parts fit together smoothly, resulting in a stable and sturdy rack once assembled. Capacity and Functionality: The rack is designed to hold a significant number of weight plates, though the exact capacity depends on plate thickness. Its vertical orientation is ideal for conserving floor space, making it a practical choice for compact home gyms. The design also facilitates easy access and organization of your plates, streamlining your workout preparation. Each post can hold multiple plates, and while the total capacity varies with plate thickness, the rack is stable and does not wobble even when fully loaded. Pros: Durable Construction: Made from steel with a powder-coated finish, this rack is built to endure heavy use. Space-Efficient: The vertical layout is perfect for gyms with limited space. Easy Assembly: Comes with clear instructions and hardware for a straightforward setup. Protective Features: Rubber or plastic linings on post ends prevent plate damage. Cons: Plate Compatibility: Designed exclusively for 1-inch plates, limiting its use with other plate sizes. Assembly Time: While generally easy, the assembly can take up to 30 minutes, which may be lengthy for some users. No Weight Capacity Information: The manufacturer does not specify explicit weight limits, so users must rely on the material and design strength for guidance. Overall Impression: The CAP Barbell Weight Plate Rack is a dependable and effective solution for organizing 1-inch weight plates. Its sturdy construction and space-saving design make it a valuable addition to any gym. Although it's tailored for standard 1-inch plates, its durability and functionality offer excellent value for those looking to keep their workout area well-organized. Rating: 4.5/5 For those in need of a durable and well-designed rack to manage their weight plates, the CAP Barbell Weight Plate Rack is an excellent choice. It delivers impressive performance and value for its price, making it a strong contender in its category.

Better than expected for the price. Easy assembly, solid build.

It's not bad and does what it needs to do. As some others have reported, it can be a bit wobby upon initial assembly. However, the bolts can be adjusted to account for that to some degree, and some mild bending can fine-tune the alignment of the base pieces. The design of the base is sort of odd but it works well enough. I spent maybe an extra minute per side adjusting the bolts and another minute doing some bending adjustment, as in slight pressure while the stand was on a hard flat surface. I got it perfectly level. Having a second person or perhaps some clamps would help to keep each base piece where you want it while you tighten the bolts. My exercise room is carpeted so I'm perhaps not as sensitive as others. Not a bad value for the price. I use it to store 210lbs of 1" plates for two adjustable dumbbells. It's solid and doesn't take up much space.

I am very pleased with this rack because when assembled it is very rigid. A few reviews complain about the rack wobbling. I found that the Allen wrench (aka hex wrench or hex key) that is included is not up to the job of tightening this rack properly. Get a good set of long hardened metric Allen wrenches so it will not round out in the bolt, and a socket set or box end set of wrenches. Tighten until the slightest amount of deformation of the steel tubes can be detected. Then it is tight enough. The U brackets will take some extra leverage to totally compress them tight against the center tube. This is why good tools are needed, and a bit of muscle. Also take note that the bottom center "peg" DOES NOT TAKE A WASHER!!!! If a washer is used then the head of the bolt sticks down too far and makes the rack "wobble" (it can be spun like a top, don't ask how I know this. LOL). The bottom tube has an extra large indentation specifically to allow the bolt head to clear the floor. Putting a washer here is probably why many reviewers complained that there was a missing washer. The instructions clearly show that no washer is used at this location. After assembly, place the rack on a hard level surface and it may wobble. At this point, loosen two of the bolts at one end, press down on the rack to level the feet and tighten those bolts again. Bingo! Its level and does not wobble. In the attached photos, the big weights on the lower peg are 12.25" diameter, 25 LBS each. They will fit one above the other on same side, with about 3/8 to 1/2 inch clearance between them. If you have Olympic weights with the 2" hole, I strongly suggest getting the Olympic weight version. Once the rack is loaded with weights, it will be difficult to move. I use a "utlity" room for an exercise room as well as other tings and need to move the weight rack around. So a set of heavy duty casters Online Best Service 4 Pack Caster Wheels Swivel Plate Casters On Black Polyurethane Wheels 880 Lbs (2 inch Plate) were screwed to the bottom and the rack rolls around easily even when loaded, even on a rug. And stability is not affected, even when pulling the loaded rack by the very top point sideways. The rack was further modified by replacing the center bottom peg with a "foot" that came with a missed weld on one side. Cap Barbell sent a replacement part and I used the old part to make a center mounted bar stand using 2" metal plumbing pipe caps and heavy duty stainless clips at the top. That is why the rack looks different from the description photos. Also back when I ordered, white was an option. Its a good rack, and with casters, it is much more manageable. But you will not be happy with the results using a pair of pliers and the included Allen wrench to assemble it. Hope this info saves you aggravation. Happy Lifting!

I ordered a different one first and sent it back. Cheap, no instructions, not sturdy. I ordered the CAP rack and it is solid. Well made and holds the weight plates perfectly. No wiggle. Balanced. Great finish. Get this one

I am setting up a little workout space in my basement and needed something to hold my 160lbs of weights. The price was right on this!! I wasn’t expecting the ease of assembly and the quality of the product. I have the little 5lb weights on the middle post. The 25 and 50’s on the sided and i think i have a 10. I would recommend getting the rack set up in the space you want because it’s too heavy to move and you’ll have to take everything off. Its super sturdy… not just for the price but overall. One side oft the posts did not screw in as tight as the others but it does not hinder usability. The foot print is very small so it takes up a small amount of space. The coating, which i expected to reflect the cost… absolutely did not. I can tell that this will hold up well!! I would recommend for a beginner weight lifting space as it is priced appropriately and quality enough to get a newbie started!!

As a home gym enthusiast, weight plate clutter was my arch nemesis. Enter the CAP Barbell Weight Plate Rack, and let me tell you, it's been a game-changer! Here's why this rack deserves a standing ovation (with perfect form, of course): Space-Saving Superhero: This rack is compact but mighty. It holds all my standard 1-inch weight plates (goodbye, floor jungle!) without sacrificing precious square footage. My home gym feels organized and clutter-free, making workouts way more enjoyable. Built to Last: This rack is crafted from solid steel and boasts a durable powder-coat finish. It feels sturdy and secure, even when loaded with my heaviest plates. No more wobbling worries, just confident lifting! Simple Assembly, Speedy Storage: Putting this rack together was a breeze, thanks to the clear instructions and included tools. Now, loading and unloading plates is quick and convenient – no more struggling or wasted time. Bonus Perks: The angled plate holders make grabbing plates easy, and the rubber caps protect my floor from scratches. Plus, the affordable price tag makes this rack a budget-friendly win!