CheroCarPhone Mount for 2018-2022 Jeep Wrangler JL, Holder Stoage Tray Cellphone System Kit fits for 2020-2022 Jeep Gladiator JT (Dark Black)

I like the product for my 2020 Jeep Gladiator. It fits perfectly in the alotted space, once you pull out the original insert in your jeep. The only issue is that the product doesn't stay in place necessarily as there are no screws or tape product that comes with it, you just put it in place. I resolved it by using velcro tape, and it doesn't move at all. If you don't use the velcro tape or similar product, then the weight of your phone will tip it slightly towards you, and I just felt it was unstable.

This product seems great. I have zero miles with it so far but the install is very stable and secure and it seems to hold me phone well - should work well with any phone. The range of motion on the ball is not great but good enough.Now, installation. If you watch any of the videos or read any of the install notes here it goes fine. But if you dont, and you don't know to pull the rubber insert from your Jeep and find those screws, you'll be looking to return it like I almost did. IMO life would be easier for everyone if they just put a small instruction sheet in the box pointing out those two key steps to get started.But overall seems to be yet another great accessory for your Jeep. Mine is a 21 Islander 4 dr - some have asked about that one in particular so I can confirm it fits perfectly.

The product is well made and install was easy (read directions and you’ll have no problems). The grip is tight and holds the phone in place. Only problem is side buttons on iPhone 13 are closer to the middle of the phone than previous versions so the phone has to be installed higher on the clasp so it’s top heavy. Coupled with the ‘Jeep rough ride’ - Rubicon) vibration is an issue and the phone shakes. Tried to lower phone on bracket but pressure from the clasp engages the side buttons which is a problem. May be good option for other phones depending on location of side buttons.Update: Glue for the Inside silicone grips that hold phone in clamp does not handle summer heat well. Has fallen off a few times and won’t reattach for more than a day.

I ordered this item back in December 2021. Great product! This it gave out on a very hot day in June 2024, the piece broke that holds the mount together small round ball, and my phone fell to the floor. I went to my original order and tapped to re order in which a newer nav mount was sent > less quality and in 2 months while driving I heard a BANG and something snapped inside and My device fell on the floor and under my gas pedal while driving...NOT SAFE! I logged back in and discovered the original nav mount I ordered in 2021 is now labeled a upgrade model??? But is not on my original order I want the original model I had... This one is a piece a junk and is not worth $40 I paid for the re-order

This was really easy to install. I like how it fits into the factory area on top of the dash. Looks good. Quality is just ok at best. Haven’t had the problems with the holder breaking of yet, yet. Would not surprise me if it did. My main issue with it is that this is not meant for any type of off-roading. If you have a pavement princess this will be great for you. I took it on one trail. A level 2 trail. The phone would not stay in the mount where I needed it to. Was using my phone as a GPS tracker and it kept falling out. Any type of vibration and the whole arm shakes so bad the phone would come right out. Even if it held the phone securely the way it shakes makes it unusable.

Loved that it is assembled on to the little.compartment in the dash. So theres no way its falling off. The holder is very sturdy, the only issue is that once installed the phone stays facing upwards, to fix that i put two pennies under the holder were the screws go to make it stay facing down. Other than that works perfectly. For that little defect, the price should be a little less.

2020 Jeep Gladiator owner here.I was about to write a bad review because of how wobbly it was and missing screws... but then I got up close to my Jeep’s dash and noticed that my Jeep already had screws ready to go for me. Just lift out the rubber piece and unscrew the 2 screws from the dash. Then take the rubber pieces out of the new mount’s “cups”. Use the original screws through the pre-drilled holes and it’s a perfect stabilized fit. Easy 1 handed operation now and I’m 100% certain it will withstand any off-roading.The cups are deeper and hold more stuff now. The black plastic is a good match for the dash.You can replace the mount with anything that attaches to the same size ball... I have a wireless charging mount that snapped on perfectly and a magnetic one too.

This was easy to install. And a great idea for my Jeep. The only problem is the cell phone holder - it's a flimsy piece of plastic junk that snapped off on day #2. So I was no longer able to attach a cell phone to it, and the seller never responded to my message. To fix the problem, I ordered the item below and attached that to the ball. The ball is small so not every cell phone holder will attach. This one seems to be working great, but it's another piece you'll have to buy. Disappointing at first, but with extra effort and $$ you can make this idea work for your Jeep.https://www.amazon.com/gp/product/B08FGVNMPW/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1