6FT Flag Pole Kit,Stainless steel Heavy Duty American US Flagpole, Rustproof for Outdoor Garden Roof Walls Yard House(Without Bracket)

Bought this in 2022 along with a 2 sided 3x5 flag that was decently thick. Both were able to withstand at least 100mph on the highway. Recommend drilling a hole through the pole and use a bolt to hold in place on the receiver. Plastic clips held up until 2025 when they finally broke on the pole.

Initially, when I got my box I was disappointed as the photos I viewed during browsing gave me the impression this pole was a solid piece of metal vs. five sections. The posting did include a video which shows it is sectional, however, I missed that. Saying all that.... The sections screw together smoothly, get nice and tight and the pole is in fact very sturdy. .5mm is the thickness of the walls and it has a 1" diameter to it. (.5mm may not sound thick, but I assure you this is a nice thickness and seems very strong.) The ball on the top is plastic vs metal. The design of the two plastic clips allows the flag to spin completely around as to ensure the flag does not simply roll up in the wind. They may also be loosened and slid up and down to adjust for your flag. I personally only needed one for my particular flag and have the other in a draw in the event I would need it for a different flag later. This has only been used a little so far but we have had several storms since in which it help up with no efforts, kept my flag from becoming rolled up and has not shown any signs of weakness. Things I question with long term use is if the ball on the top end will begin to weather-chip or look bag over time and if the sections will loosen over time or cause weakness to the overall strength during high winds and bad weather. Should any of these things happen, I will update this review accordingly.

I bought this item really only for the pole. It is thicker than others (.5mm vs. .45mm) and the other specs. matched my needs. I measured the thickness of the steel and it is indeed .5mm. The pole is sturdy and will support my flags even in strong winds. I did make one modification to the pole that you might want to consider--I cut a length of wooden pole to fit inside this steel pole and long enough to provide support for this steel pole in a 45° wall hanger. This way, it allows you to tighten the screw in the holder and not risk damaging the pole. It also provide additional strength to avoid damage in high winds. (See the pictures) The spinners are much like other plastic ones that I've tried and they ALL fail to work well as the flag keeps wrapping around the pole. After some experience, I would recommend looking for spinners that have stainless steel ball bearings. They cost considerably more but FINALLY, you won't have to fix the flag again and again, maybe even ever. Once I got this full setup, I haven't had to do anything to the flag whatsoever.

Looks great and works as expected. Very happy with this purchase.

Bought this as it was recommended by Amazon along with my Jeep Flag Mount purchase. I even read the product description to make sure it was suitable for the Jeep. It states for your truck. Does not withstand vehicle use even as slow to moderate speed ! Ours bent on our way to a Veterans Jeep Convoy Fundraiser. We reinforced it the best we could in the moment by putting something solid in the tube. Started our convoy and had to pull over to retrieve the Flag before it broke off completely about half way through our route. Junk ! Several other Jeepers had similar styles and they either lost flags due to breakage or had to pull over like we did to pull in the Flag and broken pole so we didn't loose it on the road. Kind of disruption to the parade style convoy, a source of frustration and disappointment to us and huge disgrace to the US and Military Flags we were flying to bring awareness to an awesome Veterans organization! Maybe ok for your garden if you live in a no wind area but not at all suitable for a truck as advertised !

Well because each one was different. The pole is the same, the top ball is the same however the clips were different for several of them, in others they had thumb screws to lock the slider in place, others have screws you need a driver to use. Honestly it's a little off putting like the clips. I bought 4 over all between a couple of orders and 2 of them have these nice sturdy clips. They are thicker, longer and just over all feel stronger. The other 2 have these much smaller and weaker clips that are the type that will rust inside of 6 months if left in any kind of poor weather. 2 poles have thumbs screws that make it really easy to secure the sliders so the flag flies properly. 2 others have screws you need a screw driver to use. making it a LOT more inconvenient. So yea, over all I felt I got 2 worth the price easy and 2 of lower quality that aren't quite up to snuff in my eyes when I can compare them to the other 2. In the end though the poles themselves are easy to put together, they stay together and I've been using them on my Truck to fly Biden flags and they have held up to 50+ MPH speeds with zero issue. ( I changed the weaker clips on the 2 I mentioned ) So over all I guess it's okay? I just don't like the crap shoot on quality.

This spreader bar set is solidly built and easy to adjust. The metal bar feels durable, and the included cuffs are soft yet secure. Assembly was simple, and the adjustable length makes it versatile. Great for beginners or anyone looking to add something sturdy and reliable to their collection. Discreet packaging was a plus too!

Nicely made. Easy to set up. Keeps Old Glory flying high, regardless of the wind direction.

Flag pole is nicely lightweight but solidly constructed and sectional allowing height to be varied. Follow-up customer service is excellent. Highly recommend.

Works great

Love it too much

UPDATE: To really minimize the flag wrapping around the pole I recommend the following: 1. Adjust the mounting rings so they aren’t too tight, or too loose. Too tight and it creates tension and the ring won’t spin freely. Too loose and the clasp you attach the flag to can snag on the tightening bolt. 2. Make sure the handles on the tightening bolts of each ring are perpendicular to the flagpole. If they are parallel to the flagpole, the end of the clasp might snag on them. 3. Every one in a while, spray the ring with some WD40 to clean out the dirt that can accumulate and prevent the ring from spinning and add a bit of lubrication to the mechanism. I live in a windy area and I've gone through quite a few of spinning flagpoles that are available in nearly every Canadian box box hardware store. The plastic mechanism that allows the pole to spin always ended up snapping or the cheap plastic "flag pole rings" would break. My flag would routinely get wrapped around the pole regardless of the spinning function, so I decided to give this product a try. It's very sturdy. I had the remains of its predecessor or on hand and compared to the new, stainless steel pole, it felt really flimsy. I initially had problems with the flag wrapping around the pole. The trick was to adjust the flag rings so that the flag would hang a bit more loosely. Too much tension, and the rings won't spin as freely. The flag rings themselves are sturdy looking plastic, and the screws that secure them to the pole are metal. You attach the flag via metal carabiners that seem to be of good quality. With the flagpoles I purchased before, the bottom flag ring was entirely plastic and the top one was mostly plastic although the attachment clip was metal. I found that it was prone to rusting and staining the flag. All metal flag rings would be ideal, but this would drive up the cost of the product obviously as a quality set of metal rings goes for more than the cost of this flag pole.

This flag post is very sturdy , is made of steel inoxidable , it last for a long time . price is reasonable i recomend it .