BonesSkate Clean and Lube Maintance Package (Without Skateboard Tool)

You can DIY remove, clean, and lube your bearings like a pro with this kit. You will need the right tool to remove the wheels from your device, but this will pull & reinstall bearings, clean, and lube. I use 99% Isopropyl to clean, it's less nasty than acetone. The lube is great, a little bit goes a long way, 2 drops per bearing is plenty, so it lasts a long time. Definitely worth it as an all-in-one bearing maintenance kit.

I order this to help maintenance my inline skate's bearing and it does exactly that,Bottle is good quality plastic and does not react to most common cleanser solution. Has good seal so liquid does not leak when shakes, I do wear safety glasses just in case.The pulley is made out of solid metal and I have used it over hundreds of pull and push without issue. And due to the type of spacer I use (no a fault on the pulley), I sometime have to pry the bearing out at an angle with it, this move had distoryed a few cheaper pulley but this bones pulley held up! No issue.Speed cream, works as advertised, I never have any issue with this cream, just use as advised . it is as good as any other brand and bones are pretty fair on price for this deal.

The media could not be loaded. I went ahead and purchased this kit so I could clean my bearings on my USD Aeons. The package arrived on the day they said it would. I also ordered a couple bottles of 90% isopropyl alcohol. i had no issue with leakage and everything worked well. I feel like this kit will last me for a long time.. ofc the speed cream will run out eventually. I’ve skated multiple times since and everything is rolling smoothly. I blade 5 times a week so I’ll probably clean them again 2 more times before replacing the bearings and wheels with a new set.

Ordered this cleaning kit for my daughters Roller Derby skates thinking that for the most part I really didn't need the kit. In reality it turned out to be a great purchase. The bearing puller has become an indispensable tool as Derby wheels tend to be on the hard side and the material is unforgiving. If I had tried to remove them using the axle push thru method as shown on You Tube I'm sure I would have damaged them. I thought the cleaner an to be a bit gimicky too but it turned out to work quite nicely. Filled it up about 1/3 full of 70% isopropyl alcohol shook it up for a minute or two and presto clean bearings. Cleaned two sets, 32 in all and the alcohol is still clean enough for at least another go around. My Daughter pointed out that the "Speed Cream" is in fact not a cream at all but a light lubricating oil. A couple drops in each of the bearings as directed and they are lubed and protected. Overall I'm quite pleased with the purchase and the 10 to 20 dollars saved purchasing these items as a kit. The only thing that would have made this package deal sweeter would have been the addition of a skate wrench. Guess you can't always get what you want, but you get what you need.

Pretty good everything works as expected I just wish the lube bottle had a needle like dispenser to apply to bearings easier. Besides that it worked great the price for the whole thing is a little high for what it is as well.

I used this kit to clean my skateboard bearings.For the bearings puller tool:Unfortunately, my board is one of the few that uses spacers between bearings, so the bearing pulling tool wasn't as efficient as it could have been. But I was still able to use it to pull out my bearings by putting the tool into the wheel and pushing outwards and up slightly, using the spacer as leverage to pop out the bearing. I also used the tool to pull out bearings without the hindrance of a spacer and it worked perfectly then. This is the first time I've ever tried cleaning my bearings, so I can't speak for other methods, but using this tool was easy and I would consider it a necessity for bearings maintenance.For the bearings cleaning tool:Easy to use, just pop bearings in between each of the spacers on the agitator, add solvent, and shake! It was actually kind of fun to use because it was cool seeing the bearings come out all clean and new looking. I would consider this tool a luxury item; something I would recommend to a friend if they had cash to spare. There are definitely cheaper DIY ways to clean bearings, but this tool is handy, efficient, and so easy to use.For the speed cream:I have Bones Reds Ceramics on my board. On their own, they're exceptional bearings, but I noticed they weren't spinning as long as they used to. I added a drop of speed cream to each bearing and saw a difference, but it didn't return my bearings to their original greatness. I lent it to one of my friends who had a rusty bearing on this board and after adding it, it had a major difference on spin time. Speed Cream isn't a gimmick. It comes in a tiny bottle, like maybe as tall as my pinky finger, but could last awhile since it only needs to be used sparingly. I would consider this a necessity after bearings cleaning just to add that finishing touch.

When it comes to skateboarding, Bones has always been there for me when I needed help with fixing up my bearings. As a skater for over 8 years, I know who to call when my bearings are acting up. Here they are again, saving the day. For starters, the speed cream is just that. It's the best out there for making your wheels spin faster, making you move faster. The bearing press and pull is amazing. Normally, I'd have to wedge a screwdriver to take the bearings out, often damaging one or the other. This makes life a lot easier for skaters. Especially those who are in competitions. Lastly, the bearing cleaner. This is little work of magic is amazing X2. It holds your bearings on to a metal rod to keep in it in place while the cleaner does it work. Overall, this little mix of goodies is Just what any skater needs to keep on turning. Definitely a buy worth being proud of. Thanks Bones. You guys rock!If you have any questions, please feel free to ask me.

***** 5-STARS*****Great product, FAST shipping!