Description
- Brand New Southwest Speed Front Hub and Spindle Kit For Circle Track Modifieds (SWS Part # 203-880) > Custom Designed, Lightweight Kit Gives You Enough Parts To Do Both Front Wheels > All Pieces Are 100% Brand New | Kit Includes: | > 2 - Pinto / Μustang Ii Spindles (Left and Right) > Forged Steel Construction For Maximum Strength > 10 Degree Pin Inclination > Fits Stock Pinto Upper and Lower Ball Joints > Weighs Approximately 8.28 Lbs 2 - Lightweight Granada Front Hubs and Rotors > 5 X 5" Bolt Pattern With 5/8"-11 Coarse Studs > .810" Thick X 10.5" O.D. Rotor > Races Installed > Weighs Approximately 16.25 Lbs > 2 - Bearing Kits To Put The Pinto Spindles On The Granada Hubs and Rotors Each Kit Includes: > 1 - Hub Seal > 1 - Inner Wheel Bearing > 1 - Outer Wheel Bearing > 1 - Spindle Nut > 1 - Thrust Washer > 1 - Lock Washer > 1 - Dust Cover > 1 - Cotter Pin 2 - Brake Caliper Brackets To Put The GM Metric Calipers On The Pinto Spindles > Lightweight Steel > Bolt-on Design Mounts The Calipers On The Rear Side Of Front Wheels > 2 - Complete Brake Caliper Bolt Kits > Provides The Necessary Hardware To Put The Brake Caliper Brackets On The Pinto Spindles With GM Metric Calipers Each Kit Includes: > 2 - GM Caliper Bolts > 1 - 7/16" Coarse X 1 1/2" Long Hex Head Bolt > 1 - 1/2" Fine X 2" Long Hex Head Bolt > 1 - 1/2" SAE Medium Flat Washer > 2 - Bump Steer Spacers Kits With Shims > Exclusive, Tapered Design Comes With 2" Body and 3 Spacers: .100", .200", and .300" > Used With 5/8" Rod Ends and Grade 8 Spindle Bolts > 2 - Grade 8 Spindle Bolts > 5/8" X 4 1/2" Long > For Use With The Bump Steer Spacer Kit and 5/8" Rod Ends > Comes With Jam Nut ›See more product details
Kit Includes:2 - Pinto / Μustang Ii Spindles (Left and Right) Forged Steel Construction For Maximum Strength 10 Degree Pin Inclination Fits Stock Pinto Upper and Lower Ball Joints Weighs Approximately 8.28 Lbs 2 - Lightweight Granada Front Hubs and Rotors 5 X 5" Bolt Pattern With 5/8"-11 Coarse Studs .810" Thick X 10.5" O.D. Rotor Races Installed Weighs Approximately 16.25 Lbs 2 - Bearing Kits To Put The Pinto Spindles On The Granada Hubs and Rotors Each Kit Includes:1 - Hub Seal 1 - Inner Wheel Bearing 1 - Outer Wheel Bearing 1 - Spindle Nut 1 - Thrust Washer 1 - Lock Washer 1 - Dust Cover 1 - Cotter Pin 2 - Brake Caliper Brackets To Put The GM Metric Calipers On The Pinto Spindles (Left and Right) Lightweight Steel Construction Bolt-on Design Mounts The Calipers On The Rear Side Of Front Wheels 2 - Complete Brake Caliper Bolt Kits Provides The Necessary Hardware To Put The Brake Caliper Brackets On The Pinto Spindles With GM Metric Calipers Each Kit Includes:2 - GM Caliper Bolts 1 - 7/16" Coarse X 1 1/2" Long Hex Head Bolt 1 - 1/2" Fine X 2" Long Hex Head Bolt 1 - 1/2" SAE Medium Flat Washer 2 - Bump Steer Spacers Kits With Shims Exclusive, Tapered Design Comes With 2" Body and 3 Spacers: .100", .200", and .300" Used With 5/8" Rod Ends and Grade 8 Spindle Bolts 2 - Grade 8 Spindle Bolts 5/8" X 4 1/2" Long For Use With The Bump Steer Spacer Kit and 5/8" Rod Ends Comes With Jam Nut
