AmeriLite for Dodge 1994-2001 Ram 1500 | 94-2002 Ram 2500 3500 Black OE Halogen Replacement Headlights Assembly w/Corner Lights Set - Passenger and Driver Side

Bummer that Dodge had to cheap out so much on the oem headlights but these are a good replacement. The build quality seems good and the fit perfect. They line up and are nice and straight. The clear lens is nice because you can see inside to make sure the new led bulbs you just bought are going to be lined up properly. The only issue is that everyone says the leds have to be at 3 and 9 o'clock to have good pattern. I tried that and visually verified that they were in correctly but the pattern is not that great. That's why only 4 stars. I then moved them 90' to try a different setting and the pattern was no better. With the Fahren 9004 leds I bought they are plenty bright and throw a spot of light down the road pretty good. I was hoping for the line across the top and bright below but that is not the case. I will have to adjust these down a bit as they are a little high. I don't think anyone makes a led bulb that mimics the 9004 bulb. If you compare them side by side you will see that the filament is sideways compared to all of the led bulbs I have ever seen. I had to modify the locking rings to make the led lights work because the fan is to big and the wiring gets in the way...Just took off about 5/16ths of an inch and all is good. With that said they are a definite improvement over stock and worth buying. Lastly these lights are made in Taiwan.

Works good and easy to install

I bought these to install in my 1999 Dodge Ram 2500 and installed them with Auxbeam LED bulbs. Certain aspects of this review could be directly correlated to the use of said bulbs and that is why I have included that information. Use of standard halogen bulbs could produce different results not found in my personal use of this product. This is my initial impressions of this product, and I will try to remember to update this review after some time has passed using these headlight assemblies. With that said, your mileage may vary, and use the information below to draw your own conclusions.UPDATE EDIT 1/2021: Headlight housings have held up very well, there is no hazing or yellowing of the lenses, and no cracks or breaks. I did switch back to halogen bulbs after being unable to properly adjust for the LEDs. This is a fault of the LED bulbs and not the housings. With halogen bulbs, I was able to get a clear cutoff line and aim the lights properly to allow for the most light on the road while also not blinding oncoming traffic. After over a year of use with these, I would still recommend them. Continue reading for my initial thoughts on these headlight housings when purchased and first installed in November 2019.First off, these were securely packaged, with a decently thick cardboard layer on top of the housings and a piece of solid foam underneath to hold them stable inside the box. The next thing I noticed was the materials and construction of the housings. These were definitely made of a much higher quality plastic than most other products of similar nature. Also, the design of the mounting bracket was slightly larger than other housings I’ve seen. This makes for a nice sturdy construction, but does affect ease of installation. I found that I had to loosen and drop the front bumper on my truck just a tad in order for the housings to slip into place, not a big deal but it did add en extra step to the whole process. The reflectors in these assemblies are quite good for a non-OEM unit. I did have some dark spots in the beam patterns but am unsure if that’s strictly because of the reflector design or my LED bulbs. I will have to fiddle with the adjustments to see if I can minimize or get rid of these dark spots all together. Overall beam alignment seems to favor the driver’s side and should be adjusted to the right, in my opinion. Fitment of these housings was good all around, bolt holes all lined up properly, and most importantly, the screw tab on the side marker assembly was nice and thick and can actually hold the lamp in place.Again, these are my initial thoughts of this product. This truck does see a lot of night time highway driving and rough dirt roads. I will try to do an update later and report my findings on how they hold up.

Fits good looks good

It was very easy to install. My bumper was already slightly down as others suggested from when I replaced my intercooler recently. I pushed it back up into place once the headlights were installed. The light pattern is nice and bright. Really nice the bulbs were already installed too.

I really liked this product because it makes my truck look good even if it is an older model truck. Fast shipping and overall great headlight package.

Very tight fit. Tape off surrounding paint or you will scratch the paint. Better be patient and have time to figure out how best to force fit it in. It can be done. Not for installation by suits. Good quality for OEM.

Well made fit like it should fast shipping

Fitment is good. Work very well. Better than stock

Better than factory light beam pattern but they fill with moisture constantly.

Good lights till they fill with moisture I had them in for 3 days and that’s all it took

Installed for ONE Week and broke, waled up to my truck from store and signal was dangling from truck. Turns out the tab for the retention screw broke and it was tightened at factory, not by myself ...