EVEO Cable Hider Wall - 153" Wall Cord Hider, Cable Concealer, Wire Covers for Cords - Wall Cable Hider and Cable Raceway for TV Cord Hider Wire Cover - 10X (L16 x W0.95 x H0.5) - Medium | White

First impression when I received this product was the smart looking packaging it came in. Opened the box and it was just as nicely packed inside. They thought of everything with this kit even a small saw to cut the sections if needed. Although it looks like the sections could also be cut with a good pair of scissors. I opted to use the double stick adhesive tape, although the kit came with screws and wall anchors as well. The sections were very easy to install and the adhesive seems to be very good. We shall see if I ever need to remove them from the wall. I was a little tricky trying to get all my cables into the concealer but I finally was able to stuff five cables in there. The covers popped on very easily and are also easy to remove it needed. The concealer pretty much disappears against my white trim and it looks great. Much better than all of the wires before. I only needed a few sections, so I have some left over for other projects if needed. Overall I found this to be a great product and great value for the money paid. Would definitely purchase again. I didn't need to cover all my wires as I have an entertainment center that covers that section up in the photo.

These are high quality and easy to cut to size as needed. They do not come off easy once applied to surface, though. Could easily paint the top side to match wall color, the beige matched my paint so wasn’t needed.

Bought the cord cover wires for my Den. Blended perfectly and was easy to install. Once applied, never came off. Would buy again for throughout the house.

I bought this product to neatly route two CAT6A ethernet cables and one LC fiber within a network room. It was easy to use and did what it was advertised to do. In my case the routing was over plywood, and I had some concern if the adhesive would stick well enough. The instructions say to press down the strips and ideally allow 24 hours for the adhesive to grab before routing cables. I did that, and the adhesion was terrific. The kit comes with joint pieces to go over the splice along straight runs, and right angles, and there is one for a T junction. Note that these pieces snap _over_ the cover sections that close the channel after laying in the cables. I noted that the channels were a little tight for two cat6a cables, requiring a fairly tight bend. The cables didn't want to make the turns, but it worked OK to hold them down until the covers were snapped on. The channels are thing and very flexible plastic. They worked great for my application but would not be adequate if the cables are strained. Sunlight exposure or high temperatures would call for a different solution. I deducted one star due to the relatively high price for what is being sold.

Pros: - Clear instructions and proper tools included. Installation is pretty straightforward but it's nice to have tips from the manufacturer and everything you need to complete the project in the box. - Organized and tidy looking and options for any right-angle corner. Doesn't flex around bullnose corners, but that wasn't an issue for my home. - Paintable! On its own, the color of the track is fine, but the ability to paint it the color of the wall is fantastic! That can't easily/safely be done to extension cords. - Cost is very reasonable. - Quality seems good. None of the parts broke during installation. I can't speak to longevity because I've only had this for short time, but since it's a stationary application, I don't foresee any issues. Cons: - Slight plastic odor that dissipates quickly. I have a sensitive nose and noticed it when I opened the box. I don't smell it in the room after installation. - 17 inch span maximum between couplings. I wish I could get a 9 foot length of raceway channel -- one that doesn't require coupling brackets every foot and a half. Probably not an issue in most applications, but I've got a long span from my lower level family room to the front door entryway to cover that runs vertically up the wall. Rationale: Having a "smart home" is great until you realize that every single component needs to be plugged into a power outlet, of which there are never enough and never in the right place. I've spent a fortune on extension cords recently -- rotating plugs, proper length, proper color + mounting along trim -- and they still look unsightly. Grrr! I would have saved myself so much time and money if I had known about this cable concealer a year ago.

This cord cover is easy to use, easy to paint if desired. The adhesive strips hold fairly well even to lightly textured walls so I haven’t had to screw down any of the bases. The channel length can be altered with very sharp sturdy shears if done carefully to avoid cracking the plastic, or with a hacksaw. I really like that even though the top cover is easy to remove if changing or adding cords, it holds to the base securely. And the connection pieces that are included allow for almost every possible configuration of corners. This is the second set of these I’ve ordered, having used every inch of the previous pack.

Just perfect

Excelente producto, práctico y completo !!