D'Addario Bass Guitar Strings, XL Nickel Half Rounds, ENR71, Long Scale, Regular Light Gauge 45-100, 4-String Set, Pack of 1

Bottom Line: These strings truly do have most of the smooth playing feel of a set of flat wound strings, though not completely as smooth. (The outer winding surfaces were made as normal round wounds, then the outer surface was ground down until the surface was flat-ish.) Yet the tone of these strings retain a noticeable amount of the brightness and overtones of round wound strings. The best of both worlds on a bass if you ask me. Very Important!: These medium scale strings fit my Hofner Club bass perfectly. The heavily wound portions of the strings run from below the archtop's floating, rosewood bridge and then, just past the nut of the bass, these strings quickly taper down to where they DO fit into the holes of the guitar tuning pegs Hofner uses on its basses. The E string's taper at the top is just enough that it fits snugly into the E tuner's post hole. The other strings, of course, fit into their tuners with more ease. This bass is a joy to play, and the feel and tone of these strings have increased my enjoyment of playing it. I was given a Hofner Ignition Series Club Bass for Christmas, though I got it early. The Club bass is made in the same manner of hollow body construction as its more famous Hofner Violin or "Beatle" bass brother, only the Club bass uses the same Les Paul-ish shaped, single cutaway body as the Hofner Club guitar. The natural tone of these hollow body basses has a distinct thuddy, woody character resulting in a tone more akin to the tone of a large acoustic double bass than does any Precision or Jazz bass. These Hofner basses are 30 1/4 inch scale (15 1/8 inch from nut to center of twelfth fret) basses for which there are notoriously few choices of string sets because of the extra string length needed from the bridge to the trapeze tailpiece. I have wanted a Hofner Club bass for over twelve years (when I first laid eyes on one of these sunburst beauties being played by Kurt Smith of Tears for Fears) and I finally got one; even if it is the $350.00 Chinese version rather than the $2300.00 German original. (The bass's manufacture, finish, and workmanship are simply amazingly close to perfection! I'm truly impressed with the workmanship.) However, I really liked the sound of this Club bass with the included round wound strings. Sadly, the winding end of the factory strings were coming unwound somehow and the A string broke at the tuner, necessitating this string purchase. On my other bass I have long used a set of D'Addario ENR71 "Half Round" bass strings and love them. If the Hofner Violin and Club bass users on the bass forums are to be believed, the vast majority of new Hofner bass owners immediately on delivery remove the round wound strings installed in the factory and replace them with LaBella or other brands of flat wound strings. I guess the idea is to get as close to Paul McCartney's unique thumpy bass sound as possible. I'm different, and am loving the thumpy AND bright overtones, and feel of these D'Addario ENR71M medium scale strings on my new short scale Hofner Club Bass.

These half-round bass strings give me the full tonal Range I desire, plus a tonal Quality that is even more impressive. And what's Really going to sell you is the Feel! Smooth as silk compared with round-wound, can hardly feel the difference vs. flat wounds, but they give you the full traditional Motown punch with the highs rolled off, Plus the ability to go Entwistle or Squire on a scoop tone... deep lows and bright highs with proper EQ. My favorite feature of these strings is that I can mimic a fretless bass (acoustic or "Jaco"). You want to slur up or down to a note and apply finger vibrato on the sustain? DONE! No scratchiness on the slur (again, silky) and the string gauges are light enough to allow an easy vibrato... no chorus required. (I'll also fret Back from the fret to induce a little growl, and work off the bridge pickup if I want to really try to emulate the Jaco Jazz tone.) As long as these are for sale, I have no reason to try another set... I can't imagine a string feeling and sounding 3x better (and that's what I'd have to pay to move higher from here.)

These strings are amazing! They feel great, sound great, and there is almost no string noise. Really brought my fretless to life and I think I will put a set of halfrounds on my 5-string bass when the time comes.

Sounds excellent. Pleasure to play. Got the medium strings but curious about other sizes now. Will purchase again.

I put this on a Squier CV 51 Precision Bass, they are way brighter than regular flats but way mellower than rounds, a perfect in between sound... I really liked the sound but they somehow feel “stickier” than even rounds, they are soft but sticky, it’s kinda weird feeling, I’m sure it just takes a bit of use to loose that stickiness... This are my first half’s, I’m more used to flats, but was looking for this sound for that bass, sound wise they are perfect.

Vengo de utilizar las ECB81 (Cuerdas planas de D'Addario). Las he instalado en un Sterling SUB4 y suena genial. No pierde tanto brillo como con las que son totalmente planas y el tacto es agradable. Cuando necesite volver a comprar cuerdas, las tendré en cuenta.

Cuerdas excelentes. Tienen el mismo sonido brillante que las cuerdas de entorchado redondo, pero un tacto más suave, que hace que se produzca menor ruido del roce de los dedos. Desde que las tengo no paro de tocar. El servicio de Amazon excelente, no me llegaron en el tiempo previsto y al reclamar me mandaron otro juego sin coste. Ese segundo juego me llegó en plazo.

Awesome bass strings has long sustain and soft touch.

Für mich genau richtig.Was für Bassworker.

Ceux sont les meilleurs semi-flat que je connaisse. Sur une fretless elles font bien le boulot et la basse produit le mwa fretless.