KIWI design VR Cable Management, 6 Packs VR Pulley System Compatible with Quest 3S/3/2/1/Pico/PSVR/PSVR2

So, it works as advertised and I love it. Makes it very easy to play games without a wire interrupting you. Here is the downside: you will feel a tug when you move too far from center. Depending on how you set it up, you can mitigate this pretty well, but the fact is, you will always feel it. I got this along with a few friends. We all prefer having our set up this way, however, for one of my friends it’s a close call. I think it’s great for games where you are consistently turning, and especially for games where you are sitting down. When you are sitting, if you set it up correctly, there is no tug and no wire going down your shoulder or back. When you are standing, and moving around to bend over, etc… you will feel a tug. Again, it can be mitigated, but only to a certain extent. Ultimately, you have to ask yourself whether you prefer feeling a cable going down your side, or a tugging when walking too far. I have a small play area so the tug is a helpful reminder that I am almost out of my play area. It is a plus for me, but perhaps, you might not feel the same way if you have an extremely large room. Also, it’s extremely easy to take down and put back up (after you have initially set it up) if you need the area to look cleaner when you have guests. Lastly, and this is more of a tip: depending on what game I’m playing, I do a lot of turning in the same direction. This can lead to the wire twisting significantly. I learned to provide some slack on the loops closest to me so the cable is free to turn as needed. After, I play this game, I usually disconnect my link cable and ensure that it is not under tension. Personally, I prefer having to do this than having the cable dangling by my side when playing, or having to be aware of its presence and having to account for stepping over it when playing. At the end of the day it works.

I had previously bought the $20 VR Cable Management from KIWI, and I'm replacing them for multiple reasons, which the pro version has improvements for: The wire - steel vs dyneema: The pro version has a dyneema wire, which is stronger than steel, more flexible, cannot rust, cannot weaken from bending, cannot weaken from twisting. These are all problems that I experienced with the thin steel wire, which broke after 150-200 hours of use, and I'm confident the dyneema will handle constant movement and bending far better than steel. The cable holder - silicone strap vs rubber o-ring: The pro version has a plastic cable holder with a silicone strap to buckle the cable in. On the standard version, they give you a rubber o-ring, which you wrap around your cable, and attach to a tiny metal clip with sharp edges. The metal clip wears into the o-rings and causes them to break. On the pro version, the silicone strap is far thicker than the o-ring, and is held straight by the plastic buckle, so it cannot twist or wear down. The wall attachment is identical to the standard version, which is fine. It worked well for me in the past, and I don't mind that nothing changed. Though the standard version also used the metal clips and o-ring to attach to the wall. The pro version has a silicone loop built into the reels, which again, is much better because the o-rings can break. The overall construction is also much nicer. The reel is a custom plastic mold for the brand with a higher quality plastic, as opposed to the standard version, which looks and feels like a generic part, made with cheap materials. The higher quality materials do make the pro version quieter than the standard version, but I would not call it silent. There is still the sound of the the reel (think of how a retractable badge, or key holder sounds). I look forward to using the pro version of this product for a long time, and I would recommend anyone considering the standard version to upgrade. The standard version will work ok, but it will wear down after a while.

This up a stress free game room style of Vr gaming. Easy setup and it’s done! Durable and strong adhesive! Even in Hawaii’s humidity still stays stuck! ,

Overall I'd say it's a great product, definitely an improvement over having all your wires go to your feet. Takes some time to set it up for good comfort - having to compromise between having extra loose cable hang down and have it get in the way of your hands, or have the wires basically glued to the ceiling and have a bit less freedom of motion. Also, what I found to be better if you have your PC in front of you, is to guide the wires around so the cables leaving the HMD are going up and behind you a bit (so the centre of the triple hook setup is behind you); I experienced less HMD tug where it would almost rip the headset off my head (exaggeration, it would just move it off-centre and the view would thus get blurry and you'd have to readjust). Thankfully they include lots of those sticky hooks, so I managed to use two as wire guides on the wall, three for the triple hook thing, and three extra to completely redo the triple hook thing since the first time it turned out too bunched up and too 'forward'. The only real negative I have is how tight the pulleys are; I wish they were tight enough to be able to hold their shape and maybe 50g extra for wire tension, and that's it - my play space is quite small, maybe around 2mx1.5mx2m (WxDxH) and on the edges, or when I get down, the headset gets pulled back way too much where it just breaks the immersion. Especially if you don't have much slack in the cables and two pulleys have to start unwinding, so it's double the force you have to combat. Not unusable, but if you're like me and don't like to tighten the HMD until you lose blood circulation, it does get a tad annoying having to pull your headset down to eye-level after crouching. Great for seated VR as well, and if you have a spinning chair - all the wires go up instead of getting tangled on the wheels!

Kiwi 6-Pack Cable Management Clips Review I recently tried the Kiwi 6-pack cable management clips for managing my computer cable to my vr, and here’s my detailed take on them. Setup & Installation The kit comes with six clips and even includes an extra one. I used them primarily to hold and slack cables from my PC to a VR headset (specifically a heavy cable for the Pimax Crystal). Installation is straightforward: these clips stick firmly to both walls and ceilings, making it possible to route cables neatly across rooms or tricky angles. Performance One of the things I liked is how versatile they are. Even when doubling up a clip to reach a distant corner, the cable can easily extend across an entire room. In my test, it reached from one end of the room to a corner with no issues, and it didn’t interfere with ceiling fans at all. The clips hold heavy cables well—something to keep in mind, because this is a high-tension scenario. Even with slacking for extra length, the clips maintain a strong hold. I’m over six feet tall, and with the cable routed about a foot above my head, the clips still kept everything secure without sagging or losing adhesion. Cautions / Considerations The adhesive is extremely strong, so removing the clips can be tricky if you want to reposition them. You can’t “yank” the cable out once it’s in; the clips are meant to hold cables firmly in place. If you plan to run cables near fans or other obstacles, testing first is recommended, but in my experience, it worked fine even near ceiling fans. Pros Strong adhesive for secure cable management Flexible placement on walls and ceilings Can hold heavy cables without sagging Extra clip in the kit is a nice bonus Works across longer distances than expected Cons Hard to remove once applied Not designed for frequent cable removal or adjustment Cable must be carefully placed; can’t just yank it out Overall The Kiwi cable clips are highly effective for permanent or semi-permanent cable routing, especially for heavy or long cables. They are strong, versatile, and ideal for neat setups across walls and ceilings. Just be cautious when removing them or repositioning—they’re meant to stay put once installed. Rating: ★★★★★(5/5) — Very strong, reliable clips, but limited if you need frequent adjustments (why would you, there ment for a permanent vr setup) On a side note they can fit any cable size, thin small or multiple huge ones, the end is rubber that holds the cable and can stretch alot, it also has 3 different cliping sizes like a belt. -Furry_smasher

I love it, I still use it today, does exactly what I need

This is a great product for my PS VR2. Ceiling installation was quick and simple with a drill and ruler (I didn't use the adhesives due to ceiling popcorn but I am particular about spacing...). The white set blends well into a white ceiling when not in use. It's also easy to remove and store the pulleys if you don't want them hanging when you're not playing (I haven't found the need for this, though). The pulleys are responsive and quiet, while maybe a hair too tight. For the more than reasonable price, I understand adding tension adjustment couldn't be feasible, but I'd be glad to see a higher-end model released with that feature. Still, this product is really top notch at a superb price with support from Kiwi that is absolutely better than any I've received in decades (especially you, Amazon, you monster).

I put off getting this for a while, but after having my VR headset for over a year, I was fed up with my feet and legs getting caught up in the cable. I've finally purchased this product, and...it works really well! Much better than I anticipated. I cannot compare the pro version with the regular version, but if you're worried that the regular version will pull your headset and break immersion, spending a bit more to get this pro version is a solid choice. While there's still the occasional tension depending on which direction you lean or crouch, it's way, WAY better than dealing with the cord beneath your feet. I'm very impressed with the quality of the product! Granted, this review is being written only a few days after purchasing, but it feels like it will hold up for a long while. You have the choice of mounting the pulleys with hooks that screw into your ceiling, or adhesive pads that sport hooks. I'm using the adhesive pads, and they work like a charm. I'm convinced they will never fall off! Since getting my headset, I've bought this product and a play mat (ProxiMat), and downloaded a free app off Steam (Cable Guardian) that gives you audio queues when you've turned too much in one direction (to ensure you're not twisting your cable). If you're wanting a top-notch VR experience and only have a small space to play in, I highly recommend this set up!

Es gibt nichts schlimmeres, als während einer hitzigen Runde auf einmal in seinem Kabel verknotet zu sein und im schlimmsten Fall dieses durchreißt. Die 6 Pulleys kann man entweder per Schraubhaken oder (sehr klebrigen) Pads an der Decke anbringen. Ich empfehle eine Montage in Dreiecksformation mit insgesamt 4 Pulleys + Metallring (siehe Bild). Spiele damit ziemlich angenehm mit meiner Rift S auf 3x3m Fläche. Die Pulleys sind leise und ziehen sehr gleichmäßig ohne zu sehr am VR-Headset zu ziehen. Habe noch mit meinem 3D-Drucker eine Kabelhalterung für den Hinterkopf gemacht. Wenn es mal zieht, dann wenigstens nicht schräg links.

Super útiles, es increíble lo mucho que cambia la experiencia de juego solo con tener estos aparatitos, son mágicos. No se como describirlo pero eliminar el temor de enredarte o tropezarte durante el juego es magnifico te da una libertad genial. Super recomendados, y bien sencillo de instalar, yo los pegue como si fuesen pegatinas, así de rápido.

The product is a worthwhile investment. For a wired VR headset, this accessory is essential; while I find the pricing somewhat excessive, the superior comfort justifies the cost. There is no comparable alternative currently available.

This Polly cable management is fantastic! Its super easy to install and keeps your cable out of the way when not used. This is great to play PCVR without worrying about stepping on the cable or in tangle yourself. The parts feel durable and premium. Pros: Comes with all of the necessary items to set it up! Extra parts are given in the case of a mistake when placing. There are two ways given for installation, the first being a stick to the wall mount and the second being a screw mount. Every part feels premium and good to the touch. You can adjust the cables pull length. Cons: There are no cons. Final thoughts: I’ve been using this Polly Cable Management for about a year and it works like when it did out of the box! This is an amazing purchase if you love playing PCVR and want your cable out of your way. I would strongly recommend this! 11/10

These are freaking Amazeballs I feel like I'm wireless very easy to set up!! I can easily dance p laying beat saber and do 360 maps no struggle or tripping over cables!! Thank you!! Highly recommend