Monoprice Low Profile 22 lb. Capacity Speaker Wall Mount Brackets (Pair) Black

If you are looking for a way to mount your speakers securely and with a low profile, then Monoprice Low Profile Speaker Wall Mount Brackets are perfect for you. These brackets are designed to hold up to 22 lbs, making them suitable for most speakers. The brackets are made of durable and sturdy materials to ensure they provide the support you need for your speakers. They come in a sleek black color that blends with most home decor styles. The design allows for easy installation and ensures your speakers are mounted flush against the wall, giving your room a clean and uncluttered look. With the Monoprice Low Profile Speaker Wall Mount Brackets, you can adjust the angle of your speakers to your desired listening position for the perfect sound experience. You also have the option of hiding the speaker wires for an even cleaner look. Overall, if you want a simple and reliable solution for mounting your speakers, the Monoprice Low Profile Speaker Wall Mount Brackets are a great choice.

These are very light speakers (2.1 lbs) so the ball/socket arrangement worked very well. I would think 22 lb speakers would be a bit heavy for this arrangement. My speakers have a screw in but did not fit with the ball thread. They provide a lot of fittings and there was a bracket that worked well to transition from one thread to the other. As others have noted, I had to cut the ball screw shaft down by about 5/8" so that the speaker would be closer to the wall. Not much trouble, just used a vice-grip and a hacksaw then filed it smooth. The drywall screw mounts provided were worthless, so I used some that I had that worked much better. While there were little to no directions, it was pretty intuitive, so most people shouldn't have any problems with installation. The range of motion is pretty good. Looks very good and it met my needs of having a mount that didn't stick out too far from the wall. So, I am very satisfied with this mount and recommend it for light to medium weight speakers.

These wall mounts are easily to assemble and are strong. They will tilt downward as time goes by, but they are definitely serving their purpose.

Bought these a while back.. they’re still hold my speakers. Works as described! Want to get another pair but apparently they’re not available anymore. Smh

I recently purchased these wall mount brackets to mount the rear speakers in my new Monoprice 5.1 system, and I couldn't be happier with my purchase. These brackets are well-designed, easy to install, and offer excellent stability for my speakers. One of the things I love about these brackets is their low profile design. They sit very close to the wall, giving my speakers a sleek and modern look. The black powder-coated finish is also very attractive and blends seamlessly with my home theater setup. Installation was a breeze, thanks to the included hardware and clear instructions. I was able to mount the brackets to the wall quickly and easily, and the ball joint mechanism made it simple to adjust the angle of the speakers for optimal sound. The durability of these brackets is also impressive. They are made from heavy-duty steel, and I can tell that they will provide a stable and secure platform for my speakers for many years to come. Overall, I highly recommend these wall mount brackets to anyone looking for a reliable and stylish mounting solution for their speakers. These brackets are a great value for the price and have exceeded my expectations.

We bought these after another brand I tried just felt flimsy and awkward. Our speakers are around 8# each and this design easily holds them without worry. I like the 2 part design, so you can easily detach speakers without having to use tools. The base is anchored to the wall and a second piece connects to speaker and can slide down into the plate. Also, the flexibility of the ball-joint type system makes for super easy adjustment. For the brand of speakers I purchased, the middle center speaker had holes too far apart for a single mount but could just place 2 mounts side-by-side to make it work. As we tried to place these high in the room, we weren't able to install the top screw to keep things in place. Not terribly bothered by this because they feel so sturdy, I'm not even worried about it. These are perfect for smaller spaces as they are super slim and keep speakers close to the wall and well out the way of anything. Solid product all around and great price compared to other systems.

I bought a Logitech Z906 5.1 system for my garage and needed some mounts. Packaging is good. I bought two sets (4 mounts total), and one box was damaged, but inside, everything was fine and well packed. The mounts themselves feel pretty strong and I am confident they will hold just fine. What is hard to tell from the product page is that use a ball joint mount for the speaker, so the speakers can swivel, well I can't give you an accurate degree, but it swivels in a sphere (up, down, left, right, etc). It also comes with two speaker screw supports - one for small speakers, like the Logitech, and one for maybe a medium size speaker. I am not certain how much weight these will hold, but it holds the Logitech, so I'm good; I would suspect nothing larger than a medium weight book shelf speaker. The wall mount bracket comes with 4 screw holes. All mounting hardware is included, however, I used 2x 1 5/8 inch sheetrock screw and 2x 2 inch wood screws to mount the brackets. the speaker attachment slides on and down to lock into place, and then you can use an included screw to lock it in place, but to be honest, I didn't need it - from screwing the bracket in, it flexed the wall mount bracket a tiny bit, so sliding the speaker mount bracket onto the wall mount bracket required a soft rap of my pliers' rubber handle to get it to slide/lock down - totally fine with that. Best way to do that is get it into place and hold with one hand, then tap the top with your tool to bring it down - watch out that you use something softer like rubber so you don't gouge out the wall, but you may mark up the wall if inside the house where you care, so maybe use a flat head screw driver and then tab that so you don't bump the wall trying to push the bracket down. Once you mount the wall bracket, you take the speaker bracket and remove the giant 3-star nut. It screws off by hand to reveal the ball socket. Put the ball speaker screw in the socket, and replace the 3-star nut - it's got quite a few threads, and they are thick, so it seems pretty sturdy. From there, determine if you need the small or large speaker support attachment (I needed the small one) and then screw in your speakers. don't overtighten. Once done, take the speaker support bracket/attachment and lock it down tight again the back of your speaker. Hook up the speaker wires and mount your speaker on the wall bracket - DONE! That's it. I mounted 4x speakers in two parts of the garage, ran/custom cut 5x 16 gauge Amazon Basics speaker wire for the Logitech speakers, stabled them to the wall/ceiling where appropriate, and tested the system in 45 minutes. I am considering buying a third set (because I'd like to mount the center channel and these only come as a set of two, so I'd be wasting one, but it would be worth it as I would definitely buy these again (considering using them for my inside 5.1 system in the family room (fronts only, rears are mounted on ceiling already).

Nicely designed and easy to use. But barely functional for my 10lbs speakers. Users should be aware, the ball and socked joint is designed to basically be tightened once. The ball is a "soft" plastic and the socket has little dimples that will bite into the ball to keep it from moving once everything has been screwed tight. If you reposition the speaker what the ball and socket joint is tight you will score the surface of the ball and it will not hold firmly again. Even cranking the ball and socket joint as tight as I dared (it is all plastic) my 10 lbs speakers sagged in this mount.

Las bases son bastante compactas pero muy resistentes. Coloqué 2 bocinas pequeñas y 2 bocinas grandes para mi Home Theater con sonido Atmos. Las bases fueron de las pocas que soportan más de 5 kgs sin ser voluminosas. Excelente calidad en los materiales y mucha facilidad para colocarlas pues contienen variedad de herrajes que se ajustan a cualquier tipo de bocina. Sí los recomiendo ampliamente.

I recently purchased a 2021 Samsung Surround Soundbar system and for some dumb reason they don't include any mounting hardware for the 2 satalite speakers. These did the job very well!

These are very sturdy speaker wall mounts. I used them to fit pure jongo t4s. Easy to fit and hold speakers securely. My speakers are about 2.5kg. Also I can lift the speakers out of the wall mount (and replace with ease) which means my speakers are still portable. No complaints. Quality product.

I used the Monoprice wall mount brackets to hang a pair of surround speakers, Energy CB 10; each speaker is at 7.8 LB (I weighted them) and they have in their body a 1/4"x20 threaded hole; although the brackets come with a few anchors (for concrete) having in my basement only drywall I ended up using regular, standard, drywall anchors; the brackets are sturdy, well done, come with a multitude of connectors to speakers, are very easy to install, I had no issues whatsoever; I read some reviews being critical on their looks (e.g. 'Monoprice' label), but I have no idea what they expected: these brackets are hidden behind a speaker, practically invisible, nice, clean, simple; my speakers will tilt a bit downwards due to weight (see pic) but won't touch the wall and are very easy to secure in a certain position; I wholeheartedly recommend them to anybody who wants to hang speakers

Robust quality product. I have used it for mounting my surround speakers.